Detailed instructions for use are in the User's Guide.
Window-type Room Air Conditioner ( Cool ) Acondicionador de aire doméstico sistema de tipo ventana ( Refrigeración ) Climatiseur de type Fenêtre ( Refroidissement ) O ar Condicionado de Window-Type ( Refrigeração ) Condizionatore d'aria per ambienti da finestra ( Raffreddamento )
E S F P I DB68-01741A(12)
ITALIANO
AW06FASAA AW06AASAA AW07FASAA/AB/BA/DA/EA AW07AASAA/AB/BA/DA/EA AW08FASAA/AB AW08AASAA/AB AW09FASAA/BA/DA/EA AW09AASAA/BA/DA/EA AW10FAJAA/BA/CA AW10AAJAA/BA/CA AW12FAJAA/BA/CA/DA/EA AW12AAJAA/BA/CA/DA/EA AW12FAMAA/BA/CA/DA/EA AW12AAMAA/BA/CA/DA/EA AW14FAMAA/BA/CA AW14AAMAA/BA/CA AW18FAMBA/CA/DA/EA/EB AW18AAMBA/CA/DA/EA/EB AW18FAMBB AW18AAMBB AWT18FAMBA/BC/DA/EA/EB AWT18AAMBA/BC/DA/EA/EB AWT19FAMBA/EA/EB AWT19AAMBA/EA/EB AWT20FAMBA AWT20AAMBA AW22FAMBA/EA AW22AAMBA/EA AW22FAMBB AW22AAMBB AW24FAMBA/EA AW24AAMBA/EA AW24FAMBB/BC/BD AW24AAMBB/BC/BD AWT24FAMBA/BC/EA/EB AWT24AAMBA/BC/EA/EB
PORTUGUÊS
FRANÇAIS
ESPAÑOL
OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION MANUAL DE INSTRUÇÕES ISTRUZIONI PER L'USO
ENGLISH
Safety Precautions
The following safety precautions must be taken when installing and using your air conditioner. 1 The air conditioner must be plugged into its own specific power source, which must be
installed in compliance with national wiring, earthing and safety regulations. Depending on national regulations and your specific installation, you may need to install: x A circuit breaker For further information on electrical requirements, contact a professional electrician. This device must be installed according to the national electrical rules.
2 Make sure that the unit is correctly ventilated at all times;
do NOT place clothing or other materials over it.
3 NEVER spill liquids of any kind into the unit.
Should this happen, unplug the unit and contact your installation specialist.
4 Do NOT insert anything between the air outlet blades, as it may damage the inner fan
and you may be hurt. Keep children away from the unit.
5 ALWAYS ensure that the power cable is in good condition.
If the power cord is damaged in any way, it must be replaced by an authorized service technician. Do not use an extension cord with this or other appliance.
6 Do NOT attempt to repair the unit yourself. If it is damaged in any way, contact: x An authorized service center x The dealer from whom you purchased the air conditioner. 7 Do NOT place any blocking objects in front of the unit. 8 If the remote control will not be used for a long time, remove the batteries. 9 Before throwing out the device, it is necessary to pull back the battery cells
and get rid of them safely.
CAUTION The manufacturer does not assume responsibility for accidents or injury caused by an incorrectly installed air conditioner. If you are unsure about installation, contact an installation specialist.
E-2
Contents
x PREPARING YOUR AIR CONDITIONER
s s s s s
Safety Precautions ......................................................................................... Air Conditioning Unit - Main Parts, Buttons and Display ............................... Remote Control Buttons ................................................................................. Getting Started ............................................................................................... Inserting the Remote Control Batteries ..........................................................
2 4 5 6 7
x OPERATING YOUR AIR CONDITIONER
s s s s
Cooling Your Room ........................................................................................ 8 Airing Your Room ........................................................................................... 9 Adjusting the Air Flow Direction Horizontally .................................................. 10 Adjusting the Air Flow Direction Vertically ...................................................... 10 Setting the On Timer ...................................................................................... Setting the Off Timer ...................................................................................... Setting the Sleep Timer .................................................................................. Selecting Energy Saving mode ...................................................................... Temperature and Humidity Ranges ................................................................ Cleaning Your Air Conditioner ........................................................................ Solving Common Problems ............................................................................ Technical Specifications .................................................................................
OF
x PROGRAMMING YOUR AIR CONDITIONER
s s s s
11 12 13 14 14 15 17 17
x RECOMMENDATIONS FOR USE
s s s s
x METHOD
INSTALLATION .................................................................................... 18
CAUTION " The high inrush current of the starting compressor motor can have adverse effects to the operation of other equipment under unfavorable mains conditions. This equipment does not comply with the relevant technical standards for the limitation of voltage fluctuations and flicker." Before connecting this equipment to the power supply system, please report to your supply authority and obtain the consent. Do not connect other electric appliances to the same supply lines. AW18
The maximum permissible system impedance at the power junction box is 0.24 ohms. Usually, the maximum permissible mains impedance will not be exceeded when the branch to the power outlet is fed from a junction box with a rated current of 32A.
E-3
ENGLISH
Air Conditioning Unit - Main Parts, Buttons and Display
The design and shape are subject to change according to the model.
Inner air flow blades (right/left orientation) Air outlet Air inlet (inside) Air filter
(The air filter is located inside)
Outer air flow blades (up/down orientation) Air inlet (Outside)
Ventilation lever
Power plug (The type of the power plug may differ according to the type of local power supply.)
Fan speed indicators (LOW, MED, HIGH) Temperature/Timer settings Temperature adjustment buttons Operating mode indicators (COOL, FAN) Remote Control sensor Air flow blade swing button Fan speed adjustment button
Air flow blade swing indicator Energy Saver indicator Timer setting button Sleep timer setting button Timer indicator Energy Saver button Operating mode selection button (COOL, FAN)
ON/OFF button
E-4
Remote Control - Buttons
ENGLISH
Timer setting button Sleep timer setting button Temperature adjustment buttons
Operating mode selection buttons
Fan speed adjustment buttons
Energy Saver button
Air flow blade swing button
ON/OFF button
E-5
Getting Started
You have just purchased a window-type room air conditioner and it has been installed by your installation specialist. Your Owner's Instructions contain valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit's functions. This Owner's Instructions is just for using your air conditioner correctly. Thus, the illustrations shown in this manual may not exactly match your air conditioners. The booklet is organized as follows. x The following figures are shown on pages 4 and 5: Air conditioning unit (main parts, buttons and display) Remote control (buttons)
They will help you find the buttons and understand the symbols displayed. x In the main part of the document, you will find a series of step-by-step procedures for each function available. The illustrations in the step-by-step procedures use four different symbols:
PRESS PUSH IMPORTANT
NOTE
Moreover, applicable, wherever the illustrations show the positions of the buttons on both the remote control and the unit itself.
For the... Remote control
The illustrations have a... Gray background. Example:
Unit itself
White background. Example:
E-6
Inserting the Remote Control Batteries
ENGLISH
You must insert or replace the remote control batteries when: x You purchase the air conditioner x The remote control does not work correctly
Use two AAA, LR03 1.5 V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used.
1 2
Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. Insert the two batteries, taking care to respect the polarities: x + on the battery with + on the remote control x  on the battery with  on the remote control Close the cover by sliding it back until it clicks into place. Result: You can control all the functions on your air conditioning unit directly from your seat, using the remote control.
3
E-7
Cooling Your Room
Remote Control
Control Panel
You must select the Cool mode if you wish to lower the temperature in your room. You can also set the fan speed.
1
If necessary, press the (On/Off) button. x The operating mode indicator (COOL or FAN) on Result: the unit comes on. x The air conditioner starts up in the mode selected when the unit was last used. x The unit beeps twice. air Theunit conditioner is fitted with a protection mechanism to prevent the from being damaged when it is started immediately after being: x Plugged in x Stopped It will start up automatically after about three minutes.
2
If the COOL indicator is not lit up on the unit: x Press the button on the remote control or x Press the MODE button on the unit one or more times until the COOL indicator lights up x The unit beeps each time you press MODE. Result: x The air conditioner starts up in Cool mode.
3
You can change modes at any time.
To adjust the temperature, press the or button on the remote control one or more times until the required temperature is displayed. To adjust the temperature, press the or button on the unit one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. x Each time you press the temperature buttons: Result:  The temperature is adjusted by 1°C and displayed on the control panel  The unit beeps x The air conditioner starts cooling if the room temperature is higher than the selected temperature.
4
To set the fan speed to... High
Then... x Press the button on the remote control. or x Press the on the unit until the indicator lights up x Press the button on the remote control. or x Press the on the unit until the indicator lights up x Press the button on the remote control. or x Press the on the unit until the indicator lights up
Med
Low
Result:
E-8
Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page 10.
Airing Your Room
ENGLISH
If the atmosphere in your room is stale, you can air it using the Fan feature and if necessary, evacuate the stale air outside.
1
If you wish to evacuate stale air outside, push the ventilation lever on the front of the unit to the right and the open position ( ). Result: The air inside the room circulates and stale air is evacuated outside. ).
Otherwise, push the ventilation lever to the left and the closed position ( Result: The air simply circulates inside the room.
Remote Control 2
If necessary, press the (On/Off) button. x The operating mode indicator (COOL or FAN) on the Result: unit comes on. x The air conditioner starts up in the mode selected when the unit was last used. x The unit beeps twice.
Control Panel
3
If the FAN indicator is not lit up on the unit: x Press the button on the remote control or x Press the MODE button on the unit one or more times until the FAN indicator lights up Result: x The unit beeps each time you press MODE. x The air conditioner starts up in Fan mode. You can change modes at any time. When the air conditioner is in Fan mode, the temperature is not displayed; in this case, you do not need to set the temperature. Then... x Press the button on the remote control. or x Press the on the unit until the indicator lights up x Press the button on the remote control. or x Press the on the unit until the indicator lights up x Press the button on the remote control. or x Press the on the unit until the indicator lights up Each time you press a button, the unit beeps.
E-9
x x
4
To set the fan speed to... High
Med
Low
Result:
5
To control the direction of the air flow, refer to page 10.
Adjusting the Air Flow Direction Horizontally
Remote Control
Control Panel
Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the right-hand side of the unit, thus increasing the efficiency of the air conditioner.
1
Press the Result:
(or
on the unit) button on the remote control.
The inner blades swing automatically left and right.
2
To stop the blades moving left and right, press ...
