COLOR TELEVISION CL-29Z30/29Z40/29Z50/ 29Z57/29Z58 Connection Panel (depending on the model) The product color and shape may vary depending on the model. Rear Jack 1 Audio/Video Output Jacks Connect to the audio/video input jacks of a recording VCR. 2 Audio/Video Input Jacks Connect to the audio/video output jacks of VCRs, DVD players and similar devices. 3 Component Video Input Jacks (Y, PB, PR) Connect to the Component video outputs of a DVD or DTV set-top box. 480i video signal input is available. When using the Component Video input, connect audio jacks to "AV IN 2 (AUDIO-L/R)". 4 ANT IN Connect to an antenna or to a cable TV system. 4 Owner's Instructions Before operating, please read this manual carefully, and retain it for future reference. Register your product at www.samsung.com/global/register. Record your Model and Serial number. Model __________ Serial No. __________ 3 Control Panel (depending on the model) The product color and shape may vary depending on the model. Front Panel 4 5 1 2 3 7 6 1 3 2 3 4 23 1 Side Jack 1 1 2 3 2 3 Please be sure to match the color coded input terminals and cable jacks. When both the side and rear jacks (AV IN 2) are connected to external equipment, the side receives priority. 1 2 3 4 5 6 7 Indicator (Standby or Timer) Remote control sensor Power on/off Input source selection On-screen menu display Volume adjustment Channel selection Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. 1 S-Video Input Jack Connect an S-Video signal from a camcorder or video game. 2 Video Input Jack Connect a video signal from a camcorder or video game. 3 Audio Input Jacks Connect audio signals from a camcorder or video game. The 6 and 7 buttons also have the same function as the /// buttons on the remote control. If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television. English - 1 continued... AA68-03806K-01 Remote Control (depending on the model) Operation of remote control may be affected by bright artificial light near to the TV. This is a special remote control for the visually impaired, and has Braille points on the POWER, Channel and Volume buttons. 1 POWER Turns the TV on and off. 2 Number buttons Press to select channels directly on the TV. 3­ Press to select channels over 100. For example, for channel 122, press "-", then "2", then "2". 4 VOL +, VOL Press to increase or decrease the volume. 5 MENU Displays the main on-screen menu. 6 /// Controls the cursor in the menu. 7 S.MODE Press to select the sound mode. 8 P.MODE Press to select the picture mode. 9 CAPTION Controls the caption decoder. 0 MTS (Multi-channel Television Sound) Press to choose "Stereo", "Mono", or "SAP" (Secondary Audio Program). ! R.SURF Press to automatically return to a preferred channel after a userpreset time delay. @ TURBO Press to select Turbo sound. # SOURCE Press to display all of the available video sources. $ INFO Press to display information on the TV screen. % PRE-CH Tunes to the previous channel. ^ CH , CH Press to change channels. & EXIT Press to exit the menu. * MUTE Press to temporarily cut off the sound. ( ENTER While using the on-screen menus, press ENTER to activate (or change) a particular item. ) P.SIZE Press to change the picture size. a SLEEP Press to select a preset time interval for automatic shut off. b PIP Controls (depending on the model) PIP Press to activate or deactivate the PIP function. SWAP Press to interchange the main picture and subpicture. CH , CH Press to select a channel of the subpicture only when the "Source" is set to "TV". Installing Batteries Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the "+" and "­" ends of the batteries are inserted correctly or the batteries are drained. Do not mix battery types, i.e. alkaline and manganese. Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Viewing the Menus 1 Press the MENU button. The main menu is displayed on the screen. Its left side has five icons: "Input", "Picture", "Sound", "Channel", and "Setup". Press the or button to select one of the icons. Press the ENTER button to access the icon's sub-menu. Press the or button to move to items in the menu. Press the ENTER button to enter items in the menu. Press the /// button to change the selected items. Press the MENU button to return to the previous menu. Press the EXIT button to exit from the menu. 2 3 4 5 English - 2 Setup - Plug & Play When the TV is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 Press the POWER button on the remote control. The message "Plug & Play" is displayed. It flickers for a little while and then Language menu is automatically displayed. Press the or button to select the language, then press the MENU button. The message "Ant input check" is displayed. Time Plug & Play Caption Language More Adjust Skip : English Input - Source List / Edit Name 6 After all available channels are stored, the "Time" is displayed. Press the ENTER button. Press the or button to move to the hour or minute. Set the clock by pressing the or button. When you have finished, press the MENU button. The "Enjoy your watching." is displayed. Plug & Play feature doesn't work in the AV mode. Time Clock On Timer Off Timer Sleep Timer On Timer Volume Move Enter -- : -- am -- : -- am Off -- : -- am Off : Off : 10 Return Plug & Play 6 Source List Source List TV You can switch between ---AV1 viewing signal from AV2 ---connected equipment, such S-Video ---as a VCR, DVD, set-top Component ---box, and the TV source Move Enter Return (broadcast or cable). Press the SOURCE button on the remote control repeatedly to select the desired signal source. 2 Setup Enjoy your watching Edit Name You can give a name to the external source. AV1 AV2 S-Video Component Move : DVD - -Cable STB : Sat. STB ---: DVD - - - Recv. AV Recv. Edit Name --: - ---VCR 3 Make sure that the antenna is connected to the TV. Press the ENTER button, then the "Channel" is displayed. Ant input check Re-setting the Plug & Play Method: MENU / (Setup) ENTER / (Plug & Play) ENTER Enter Game Camcorder DVD Combo Return Time Plug & Play Caption Language More Move Enter : English Setup Auto Program Skip Return 4 Press the or button to select "Air", "STD", "HRC", or "IRC", then the MENU button. The message "Auto Program" is displayed. Auto Program Add/Delete Air/CATV Name LNA : Air Channel : Deleted : ---: Off Skip Adjust 5 Press the ENTER button to select "Start". The TV will begin memorizing all of the available channels. Press the ENTER button to stop. Auto Program Air 7 Start Enter Skip continued... English - 3 Channel - Memorizing the Channels Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: "Air/CATV", "Auto Program" and "Add/Delete". Air/CATV Channel Auto Program Before your TV can begin Add/Delete : Deleted memorizing the available Air/CATV : Air channels, you must specify Name : ---the type of signal source LNA : Off that is connected to the TV Move Adjust Skip (i.e., an antenna or a cable system). Select "Air", "STD", "HRC", or "IRC" by pressing the or button. Auto Program All available channels are automatically stored in memory when channels are selected by the direct tuning function. Press the ENTER button at any time to interrupt the memorization process. Add/Delete You can add or delete a channel to display the channels you want only. To use the "Add/Delete" function, first run Auto Program. Select "Deleted" or "Added" by pressing the or button. Channel - Name Use this feature to assign an easy-to-remember label to any channel (i.e., "CBS", "ESPN", "PBS2", "CNN1", etc.). A label consists of four fields, where each field is a letter (A~Z), a number (0~9), a blank, or -. When the INFO button is pressed, the channel label will appear next to the channel number. Auto Program Add/Delete Air/CATV Name LNA Move Adjust : Air ---:A : Off Return Channel : Deleted Channel - LNA (depending on the model) When a weak broadcast signal causes an unclear, noisy picture, the "LNA" feature improves the picture quality by setting to "On". If you experience noise on a certain channel, set the "LNA" to "On" or "Off" for this channel, to obtain the optimum picture. Auto Program Add/Delete Air/CATV Name LNA Move Enter : Air : ---: Off Off On Return Channel : Deleted Auto Program Air 7 Start Enter Return Auto Program Add/Delete Air/CATV Name LNA Move Enter Channel Deleted : Deleted Added :Air : ---: Off Return English - 4 Setup - Time Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Time Clock On Timer Off Timer Sleep Timer On Timer Volume Move Adjust 12 : 00 am -- : --- : -am Off am Off : 10 Return Setup - Caption Your TV decodes and displays Caption Caption : On the closed captions that are Mode : Caption broadcast with certain TV shows. Channels :1 These captions are usually Field :1 subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed Move Enter Return caption signal from TV programs, so home-recorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your TV schedule and on the tape's packaging: C C . Caption: On/Off You can activate or deactivate the "Caption" function. Press the CAPTION button on the remote control repeatedly to select "On" or "Off". Setup Language / Blue Screen / Melody / Demonstration Language When you start using the TV for the first time, you must select the language which will be used for displaying menus and indications. Time Plug & Play Caption Language More Move Adjust Return : English Setup : Off On Timer / Off Timer You can set the On/Off timers so that the TV will switch on or off automatically at the time you select. You must set the clock first. Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" to "Off". Sleep Timer You can select a time period of between 30 and 180 minutes after which the TV automatically switches to standby mode. Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from "30 Min." to "180 Min."). Melody You can hear melody sound when the TV is powered on or off. Demonstration To become familiar with the various menus provided by the TV, you can view the in built demonstration. Each of the menu options is displayed in turn. When you wish to stop the demonstration, press any button on the remote control. On Timer Volume The preferred volume can be set for when the timer automatically turns on the TV. Mode - In "Caption" mode, captions appear at the bottom of the screen, and they usually cover only a small portion of the picture. - In "Text" mode, information unrelated to the program, such as news or weather, is displayed. Text often covers a large portion of the screen. Channels / Field Depending on the particular broadcast, it might be necessary to make changes to "Channels" and "Field". Different channels and fields display different information: Field 2 carries additional information that supplements the information in Field 1. (For example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in Spanish.) Auto Power Off When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating or leakages, which may occur if a TV is on for too long. Misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. There may be a small delay before captions appear when you change channels. These are not malfunctions of the TV. English - 5 R.Surf Feature This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start. You can set Surf 00: 29 the R.Surf t ...