ELECT COLOUR TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS PICTURE IN PICTURE TELETEXT FUNCTION (depending on the model) ENG Safety Instructions ENG The following illustrations represent the precautions to be taken when using and moving your television. 10% H 5° 35° H 75% Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%). Do NOT expose the television to direct sunlight. Do NOT expose the television to any liquids. If the television is broken, do not try to repair it yourself. Contact qualified service personnel. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash and arrow head within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ! WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Mode CZ CW CS System PAL-B/G, D/K, I, SECAM-B/G,D/K, I, NTSC4.43 PAL-B/G, D/K, I, SECAM-B/G,D/K, I, L/L', NTSC4.43 PAL-B/G, D/K, I, SECAM-B/G,D/K, I, NTSC4.43/3.58 The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. 2 Contents N PREPARING YOUR TELEVISION I Safety Instructions ......................................................................................... I Caution .......................................................................................................... I Front Control Panel ....................................................................................... I Connection Panels ........................................................................................ I Infrared Remote Control (All Functions Except Teletext & PIP) .................... I Infrared Remote Control (Teletext & PIP Functions) ..................................... I Inserting the Batteries in the Remote Control................................................ I Connecting the Aerial (or Cable Television Network).................................... I Switching Your Television On and Off........................................................... I Placing Your Television in Standby mode ..................................................... I Plug & Play Feature....................................................................................... I Viewing the Demonstration............................................................................ I Choosing Your Language.............................................................................. N SETTING UP THE CHANNELS I Storing the Channels Automatically............................................................... I Storing the Channels Manually...................................................................... I Giving Channels Names................................................................................ I Skipping Unwanted Channels ....................................................................... I Fine tuning Channel Reception ..................................................................... I Sorting the Stored Channels ......................................................................... N USING THE TELEVISION I Changing the Picture Standard ..................................................................... I Adjusting the Picture Settings........................................................................ I Selecting the Picture Format ......................................................................... I Activation/Deactivation the Digital Noise Reduction Feature ........................ I Changing the Sound Standard ...................................................................... I Adjusting the Sound Settings ........................................................................ I Extra Sound Settings..................................................................................... I Selecting the Sound Mode ............................................................................ I Selecting the Turbo Sound ............................................................................ I Adjusting the Volume..................................................................................... I Switching the Sound Off Temporarily ............................................................ I Setting the Sleep Timer ................................................................................. I Setting and Displaying the Current Time....................................................... I Switching the Television On and Off Automatically ....................................... I Setting the Blue Screen Mode....................................................................... I Activating the Childlock ................................................................................. I Picture In Picture ........................................................................................... N USING THE TELETEXT FUNCTION I Teletext Decoder ........................................................................................... I Displaying Teletext Information ..................................................................... I Selecting a Specific Teletext Page ................................................................ I Using FLOF to Select a Teletext Page .......................................................... I Storing Teletext Pages .................................................................................. N INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE I Connecting to the AV-1 or 2 Input/Outputs.................................................... I Connecting to the Rear S-VIDEO Input (Option)........................................... I Connecting to the Rear DVD Input (Option) .................................................. I Connecting to the RCA Input......................................................................... I Connecting Headphones ............................................................................... I Viewing Picture From External Sources ........................................................ I Automatic Degaussing to Remove Colour Patches....................................... I Trouble Shooting: Before Contacting Service Personnel .............................. ENG 2 2 4 5 6 7 8 8 9 9 10 11 12 13 14 16 17 18 19 20 21 21 22 23 24 25 26 27 27 27 28 28 29 30 30 31 32 32 33 34 34 35 36 36 37 38 38 39 39 Symbols Press Important Note 3 Front Control Panel (depending on the model) ENG Buttons and markings are subject to change. MENU DISPLAY CHANNEL SELECTION STAND-BY/TIMER INDICATOR POWER VOLUME ADJUSTMENT REMOTE CONTROL SENSOR TV/VIDEO SELECTION VOLUME ADJUSTMENT STAND-BY/TIMER INDICATOR CHANNEL SELECTION POWER MENU DISPLAY REMOTE CONTROL SENSOR TV/VIDEO SELECTION VOLUME ADJUSTMENT STAND-BY/TIMER INDICATOR POWER MENU DISPLAY CHANNEL SELECTION REMOTE CONTROL SENSOR 4 Connection Panels This figure shows the Standard Connector-jack panel. The actural configuration on your TV may be different, depending on the model. ENG Side of TV Front of TV RCA AUDIO/VIDEO INPUT CONNECTORS HEADPHONE JACK (OPTION) RCA AUDIO/VIDEO INPUT CONNECTORS HEADPHONE JACK (OPTION) Rear of TV VIDEO AUDIO MONITOR -OUT MONITOR -OUT (MONO) VIDEO L-AUDIO-R INPUT 2 INPUT 1 INPUT RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS S-VIDEO CONNECTOR (OPTION) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTORS DVD INPUT CONNECTORS (OPTION) 2 OPTION 1 RGB 5 Infrared Remote Control (All Functions Except Teletext & PIP) ENG Buttons and markings are subject to change. POWER DIRECT CHANNEL SELECTION ON-SCREEN DISPLAY PICTURE MENU DISPLAY AUTOMATIC SWITCH-OFF ONE/TWO-DIGIT CHANNEL SELECTION TURBO SOUND ON/OFF SOUND MENU DISPLAY SOUND MODE SELECTION PICTURE STANDARD SOUND STANDARD TUNER/CABLE NETWORK SELECTION EXTERNAL INPUT SELECTION NEXT CHANNEL VOLUME DECREASE VOLUME INCREASE PREVIOUS CHANNEL PICTURE SIZE MENU DISPLAY TEMPORARY SOUND SWITCHOFF 6 Infrared Remote Control (Teletext & PIP Functions) Buttons and markings are subject to change. ENG PIP ON/OFF TELETEXT REVEAL PIP SWAP PIP LOCATE TELETEXT STORE TELETEXT HOLD PIP STILL TELETEXT SUB-PAGE FASTEXT TOPIC SELECTION TELETEXT DISPLAY/MIX LIST/FLOF MODE SELECTION TELETEXT NEXT PAGE TELETEXT PREVIOUS PAGE TELETEXT SIZE PROGRAMME SELECTION BY NAME 7 Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you : PR ES S N Purchase the television. N Find that the remote control is no longer operating correctly. 1 2 Remove the cover of the remote control by pressing the symbol ( PRESS ) and pulling the cover in the direction of the arrow. Insert batteries, taking care to respect the polarities: N N + on the battery with + on the remote control - on the battery with - on the remote control 3 Replace the cover by pushing it in the direction of the arrow. PR ES S Connecting the Aerial (or Cable Television Network) To view television channels correctly, a signal must be received by the set from one of the following sources: N An outdoor aerial N A cable television network Plug the aerial or cable network input cable to the 75 coaxial socket on the rear of the television. Rear of TV Cable Television Network 8 Switching Your Television On and Off ENG The mains lead is attached to the rear of the television. 1 Plug the mains lead into an appropriate socket. The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. (ON/OFF) button on the front of the 2 Press the POWER television. Result: The Standby indicator lights up on the front panel. button on the remote control to switch the 3 Press the POWER television on. Result: The programme that you were watching last is reselected automatically. (ON/OFF) 4 To switch your television off, press the POWER button again on the front of the television. Placing Your Television in Standby mode Your television can be placed in Standby mode, in order to reduce: N Power consumption N Wear of the cathode ray tube The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). The television is placed automatically in Standby mode when you turn it on. 1 Press the POWER Result: button on the remote control. The screen is turned off and the Standby indicator on the front of the television lights up. button 2 To switch the screen back on, simply press the POWER again on the remote control. Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely. 9 Plug & Play Feature ENG Plug & Play When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. Ant. Input : Check Select Exit 1 If the television is in Standby mode (red light visible on the television front panel), press the POWER button on the remote control. Result: The message "Plug & Play" is displayed. It flickers for a little while and then the "Language" menu is automatically displayed. Auto store Area Search : ASIA W/EUROPE : -/+ 2 Press the L or M button to select required language. Press the MENU button to enter the language, and then the message "Ant. Input : Check" is displayed. Select Adjust Exit If any language is not selected on the "Language" menu, the "Language" menu will be displayed about 30 seconds later. 3 Time Clock Timer : -- : -- am : Off Make sure that the antenna is connected to the TV. And then press the + or ­ button. Result: The "Auto store" menu is displayed. 4 Select your country by pressing the + or ­ button. To search the channels, select the "Search" by pressing the L or M button, and then press the + or ­ button (refer to "Storing the Channels Automatically" on page 13). Press the MENU button to skip. Result: The "Time" menu is displayed. Select Enter Exit 5 Function Language Time : English : Off Exit Press the + or ­ button to move to the hour or minute. Set the hour or minute by pressing the L or M button (refer ...