ELECT COLOUR TELEVISION 29A5/29A6/29A7/29K3/29K5/29M6/29U2 Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS PICTURE IN PICTURE FUNCTION GAME FUNCTION ENG Safety Instructions ENG The following illustrations represent the precautions to be taken when using and moving your television. 10% H 5° 35° H 75% Do NOT expose the television to extreme temperature conditions or to extreme humidity conditions. Do NOT expose the television to direct sunlight. Do NOT expose the television to any liquids. If the television is broken, do not try to repair it yourself. Contact qualified service personnel. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash and arrow head within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ! WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Mode CZ CW CS System PAL-B/G, D/K, I, SECAM-B/G,D/K, I, NTSC4.43 PAL-B/G, D/K, I, SECAM-B/G,D/K, I, L/L', NTSC4.43 PAL-B/G, D/K, I, SECAM-B/G,D/K, I, NTSC4.43/3.58 The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. 2 Contents x PREPARING YOUR TELEVISION s Safety Instructions ......................................................................................... s Caution .......................................................................................................... s Front Control Panel ....................................................................................... s Connection Panels ........................................................................................ s Infrared Remote Control ................................................................................ s Infrared Remote Control (PIP & Game Functions) ........................................ s Inserting the Batteries in the Remote Control................................................ s Connecting the Aerial (or Cable Television Network).................................... s Switching Your Television On and Off........................................................... s Placing Your Television in Standby mode ..................................................... s Plug & Play Feature....................................................................................... s Viewing the Demonstration............................................................................ s Choosing Your Language.............................................................................. x SETTING UP THE CHANNELS s Storing the Channels Automatically............................................................... s Storing the Channels Manually...................................................................... s Giving Channels Names................................................................................ s Skipping Unwanted Channels ....................................................................... s Fine tuning Channel Reception ..................................................................... s Sorting the Stored Channels ......................................................................... x USING THE TELEVISION s Changing the Picture Standard ..................................................................... s Adjusting the Picture Settings........................................................................ s Selecting the Picture Format ......................................................................... s Activation/Deactivation the Digital Noise Reduction Feature ........................ s Using the Tilt Control Feature........................................................................ s Changing the Sound Standard ...................................................................... s Adjusting the Sound Settings ........................................................................ s Extra Sound Settings..................................................................................... s Selecting the Sound Mode ............................................................................ s Selecting the Turbo Sound ............................................................................ s Adjusting the Volume..................................................................................... s Switching the Sound Off Temporarily ............................................................ s Using the LNA (Low Noise Amplifier) Feature............................................... s Setting the Sleep Timer ................................................................................. s Setting and Displaying the Current Time....................................................... s Switching the Television On and Off Automatically ....................................... s Setting the Blue Screen Mode....................................................................... s Activating the Childlock ................................................................................. s Picture In Picture ........................................................................................... s Enjoying Games ............................................................................................ x INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE s Connecting to the AV-1 or 2 Input/Outputs.................................................... s Connecting to the S-VIDEO Input.................................................................. s Connecting to the DVD Input (Option)........................................................... s Connecting to the RCA Input......................................................................... s Connecting Headphones ............................................................................... s Viewing Picture From External Sources ........................................................ s Automatic Degaussing to Remove Colour Patches....................................... s Trouble Shooting: Before Contaazcting Service Personnel .......................... ENG 2 2 4 5 6 7 8 8 9 9 10 11 12 13 14 16 17 18 19 20 21 21 22 22 23 24 25 26 26 27 27 27 28 28 29 30 30 31 33 34 34 35 35 36 36 37 37 Symbols Press Important Note 3 Front Control Panel (depending on the model) ENG Buttons and markings are subject to change. TV/VIDEO SELECTION MENU DISPLAY VOLUME ADJUSTMENT CHANNEL SELECTION STAND-BY/TIMER INDICATOR *STAND-BY INDICATOR REMOTE CONROL SENSOR POWER Using the Front Panel Controls If the remote control stops working, you can use the front panel controls to: x Change channels x Adjust the volume x Select options from the on-screen menus x Choose the Video mode (depending on the model) How to use the CHw/v buttons to switch among Video input modes (the model without TV/VIDEO button): x ... 99 0 1 2 1 2 ... ... 2 1 1 2 0 99 ... x ... 99 0 1 2 ... The control-symbols on the TV front panel are the same as the ones used on the remote control. 4 Connection Panels ENG This figure shows the Standard Connector-jack panel. The actural configuration on your TV may be different, depending on the model. Side of TV RCA AUDIO/VIDEO INPUT CONNECTORS S-VIDEO INPUT JACK HEADPHONE JACK Rear of TV (MONO) VIDEO L-AUDIO-R MONITOR -OUT 2 INPUT 2 1 INPUT 1 RGB RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS (MONO) VIDEO L-AUDIO-R MONITOR -OUT DVD INPUT CONNECTORS SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTORS 75 COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK INPUT 2 INPUT 1 5 Infrared Remote Control ENG Buttons and markings are subject to change. POWER DIRECT CHANNEL SELECTION ON-SCREEN DISPLAY PICTURE MENU DISPLAY AUTOMATIC SWITCH-OFF ONE/TWO-DIGIT CHANNEL SELECTION TURBO SOUND ON/OFF SOUND MENU DISPLAY SOUND MODE SELECTION PICTURE STANDARD SOUND STANDARD TUNER/CABLE NETWORK SELECTION EXTERNAL INPUT SELECTION NEXT CHANNEL VOLUME DECREASE VOLUME INCREASE PREVIOUS CHANNEL PICTURE SIZE MENU DISPLAY TEMPORARY SOUND SWITCHOFF Operation of remote control may be affected by bright artificial light near to the TV set. 6 Infrared Remote Control (PIP & Game Functions) Buttons and markings are subject to change. ENG PIP ON PIP SWAP PIP LOCATE PIP STILL PIP SIZE SELECTION PIP SCAN PIP CHANNEL SELECTION TELETEXT DISPLAY/MIX PIP SOURCE SELECTION 7 Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you : S ES PR x Purchase the television. x Find that the remote control is no longer operating correctly. 1 2 Remove the cover of the remote control by pressing the symbol ( PRESS ) and pulling the cover in the direction of the arrow. Insert batteries, taking care to respect the polarities: x x + on the battery with + on the remote control - on the battery with - on the remote control 3 Replace the cover by pushing it in the direction of the arrow. S ES PR Connecting the Aerial (or Cable Television Network) To view television channels correctly, a signal must be received by the set from one of the following sources: x An outdoor aerial x A cable television network Plug the aerial or cable network input cable to the 75 coaxial socket on the rear of the television. Rear of TV Cable Television Network 8 Switching Your Television On and Off ENG The mains lead is attached to the rear of the television. 1 Plug the mains lead into an appropriate socket. The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. (ON/OFF) button on the front of the 2 Press the POWER television. Result: The Standby indicator lights up on the front panel. button on the remote control to switch the 3 Press the POWER television on. Result: The programme that you were watching last is reselected automatically. (ON/OFF) button 4 To switch your television off, press the POWER again on the front of the television. Placing Your Television in Standby mode Your television can be placed in Standby mode, in order to reduce: x Power consumption x Wear of the cathode ray tube The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). The television is placed automatically in Standby mode when you turn it on. 1 Press the POWER Result: button on the remote control. The screen is turned off and the Standby indicator on the front of the television lights up. button 2 To switch the screen back on, simply press the POWER again on the remote control. Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely. 9 Plug & Play Feature ENG Plug & Play When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. Ant. Input : Check 1 Select Exit If the television is in Standby mode (red light visible on the television front panel), press the POWER button on the remote control. Result: The message "Plug & Play" is displayed. It flickers for a little while and then the "Language" menu is automatically displayed. Auto store Area Search : ASIA W/EUROPE : -/+ 2 Press the v or w button to select required language. Press the MENU button to enter the language, and then the message "Ant. Input : Check" is displayed. Select Adjust Exit If any language is not selected on the "Language" menu, the "Language" menu will be displayed about 30 seconds later. 3 Time Clock Timer : -- : -: Off am Make sure that the antenna is connected to the TV. And then press the + or ­ button. Result: The "Auto store" menu is displayed. 4 Select your country by pressing the + or ­ button. To search the channels, select the "Search" by pressing the v or w button, and then press the + or ­ button (refer to "Storing the Channels Automatically" on page 13). Press the MENU button to skip. Result: The "Time" menu is displayed. Select Enter Exit 5 Function Language Time Plug & Play Blue screen Childlock Demonstration Select Enter Exit : Off : English Press the + or ­ button to move to the hour or minute. Set the hour or minute by pressing the v or ...