User manual SAMSUNG DVD-HR773 - FIRMWARE UPGRADE INSTRUCTION (VER.1.0)

How to make an update disc How to make an update disc How to make an update disc Write the downloaded file onto a blank CD-R or CD-RW disc, using the Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings: following settings: 1. D wnload h e software updatefiles from www.samsung.com 1. Download th ut -NoticePlease check your correct model name at rear label rating before -Noticedownloading the firmware Please check your correct model name at rear label rating before downloading the firmware Note Recommended Application Progra m : Nero Burning/Easy Cd Creator., etc. Note option : 1. Multisession ­ No multisession Recommended Application ISO9660 orNero Burning/Easy Cd Creator., etc. 2. Character Set : Program : Joliet Format option : 1. Multisession ­ No once 3. Finalize & Disc at multisession 2. Character Set : ISO9660 or Joliet Format 3. Finalize & Disc at once Update procedure WARNING WARNING It Is very Important ;; Please read the below notice before updating your unit. It Is very Important Please read the below notice before updating your unit. The following events may interrupt the update process and MAY RESULT IN The following events may interrupt the update process and MAY RESULT IN PERMANENT DAMAGE TO THE UNIT WHILE UPDATING. PERMANENT DAMAGE TO THE UNIT WHILE UPDATING. I. Unplugging the power cord. I. Unplugging the power cord. II. II. Power Outage. Power Outage. III. Dirt or Scratches on the disc. III. Dirt or Scratches on the disc. IV. Opening a disc tray during processing. IV. Opening a disc tray during processing. 1) 2) 3) Press OPEN/CLOSE to open the disc tray. Insert the update CD-R disc with the software update, label facing up Press OPEN/CLOSE to close the disc tray. After Checking old and new version, select "Yes" or "No" with "" or "" on the remote control. *The Version is indicated by "XX.X.ModelName" *If you don't see the message above, try another disc. Generally, this is caused by disc quality and by disc creating problem. 4) 5) 6) Press the Enter button on the remote control in order to update your unit. It takes about 12 minutes to complete the update. After removing the update disc, turn off the unit with power button. And after closing a try with power button, the update is complete.