User manual SAMSUNG HT-X30T

Instruction Manual ENG DIGITAL HOME THEATER SYSTEM HT-X30/HT-X40 HT-TX35/HT-TX45 AH68-01937K COMPACT AH68-01660E REV: 01 DIGITAL VIDEO Safety Warnings CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN Precautions This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. ENG PREPARATION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER (or BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates important instructions accompanying the product. CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time. [Saudi Arabian Standards Organisation only] THIS APPLIANCE IS FITTED WITH 220V SASO APPROVED PLUG.THE CUSTOMER IS ENTITLED TO A FREE SASO APPROVED 127V PLUG FROM THE LOCAL DEALER. During thunderstorms, disconnect the AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit. The Mains plug is used as a disconnect device and shall stay readily operable at any time. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit. Phones Protect the player from moisture (i.e. vases) , and excess heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only. Condensation may occur if your player or disc has been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using. The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash. 2 3 Features Multi-Disc Playback & FM Tuner The HT-X30/HT-X40/HT-TX35/HT-TX45 combines the convenience of multi-disc playback capability, including DVDAUDIO, DVD-VIDEO, VCD, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD R/RW, with a sophisticated FM tuner, all in a single player. Contents PREPARATION Safety Warnings ............................................................2 Precautions....................................................................3 Features.........................................................................4 Notes on Discs ..............................................................6 Description.....................................................................8 ENG SETUP Settings........................................................................42 Setting the Language................................................42 Setting TV Screen Type............................................43 Setting Parental Controls (Rating Level) ..................44 Setting the Password................................................44 Setting the Wallpaper ...............................................45 To Select One of the 3 Wallpaper Settings you've made..............................................................45 DVD Playback Mode.................................................46 DivX (R) Registration ................................................46 Setting the Speaker Mode ........................................46 Setting the Delay Time .............................................47 Setting the Test Tone ................................................48 Setting the Audio.......................................................49 Setting the DRC (Dynamic Range Compression) ....50 Setting the AV SYNC ................................................50 Setting the HDMI Audio ............................................51 Sound Field (DSP)/EQ Function .................................52 Dolby Pro Logic II Mode ..............................................53 Dolby Pro Logic II Effect..............................................54 PREPARATION DVD-Audio compatible Experience the super high-quality audio performance of DVD-Audio. The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail. USB Host support You can enjoy media files such as pictures, movies and music saved on an MP3 player, digital camera or USB memory stick by connecting the storage device to the USB port of the Home Theater. CONNECTIONS Connecting the Speakers ............................................12 Speaker Installation .....................................................14 Connecting the Optional Wireless Receiving Amplifier ......................................................15 Connecting the Video Out to your TV .........................18 HDMI Function.............................................................19 Connecting Audio from External Components ............20 Connecting the FM Antenna........................................22 Dolby Pro Logic II Dolby Pro Logic II is a form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro Logic. DTS (Digital Theater Systems) DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency 5.1 channel sound. OPERATION Before Reading the User's Manual .............................23 Before Using Your Home Theater ...............................24 Disc Playback ..............................................................25 MP3/WMA-CD Playback .............................................26 JPEG File Playback.....................................................27 DivX Playback .............................................................28 Using the Playback Function.......................................30 Displaying Disc Information ......................................30 Checking the Remaining Time..................................31 Fast Playback ...........................................................31 Slow Playback ..........................................................31 Skipping Scenes/Songs............................................32 Repeat Playback.......................................................33 To Select a Repeat Playback Mode in the Disc Information Screen ...................................................33 A-B Repeat Playback................................................34 Step Function............................................................34 Angle Function..........................................................35 Zoom (Screen Enlarge) Function .............................35 Bonus Group.............................................................36 Navigating Pages......................................................36 Audio Language Selection Function.........................37 Subtitle Language Selection Function ......................37 Moving Directly to a Scene/Song .............................38 Using the Disc Menu ................................................39 Using the Title Menu.................................................39 Playing Media Files using the USB Host feature ........40 TV Screen Saver Function If the main unit remains in Stop mode for 3 minutes, the Samsung logo appears on the TV screen. The HT-X30/HT-X40/HT-TX35/HT-TX45 will automatically switch to the Power Saving mode after 20 minutes in the Screen Saver mode. MISCELLANEOUS Listening to Radio........................................................55 Convenient Functions..................................................57 Operating a TV with the Remote Control ....................58 Troubleshooting ...........................................................60 Cautions on Handling and Storing Discs.....................62 Language Code List ....................................................63 USB Host Feature Supported Products ......................64 Specifications...............................................................65 Power Saving Function The HT-X30/HT-X40/HT-TX35/HT-TX45 will automatically shut off after 20 minutes in Stop mode. Customized TV Screen Display The HT-X30/HT-X40/HT-TX35/HT-TX45 allows you to select your favorite image during JPEG, DVD or VCD playback and set it as your background wallpaper. HDMI HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture. Anynet+ (HDMI-CEC) Function Anynet+ is a function that can be used to operate the main unit using a Samsung TV remote control, by connecting the Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TV's that support Anynet+.) 4 5 Notes on Discs DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall. 1 ~6 ENG Disc Recording Format This product does not support Secure (DRM) Media files. CD-R Discs PREPARATION DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is given on the rear panel of the player. (Your DVD player will only play DVDs that are labeled with identical region codes.) · Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc. · Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minute as they may not be playback. Playable Discs Disc Type DVD-AUDIO DVD-VIDEO AUDIO-CD VIDEO-CD DivX COMPACT · Some CD-RW (Rewritable) media, may not be playable. · Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be able to fully play the disc. Mark (Logo) Recorded Signals Audio + Video Disc Size 12cm 8cm Max. Playing Time Approx. 240 min. (single-sided) Approx. 480 min. (double-sided) Approx. 80 min. (single-sided) Approx. 160 min. (double-sided) 74 min. 20 min. 74 min. 20 min. CD-R MP3 Discs DIGITAL VIDEO Audio Audio + Video Audio + Video 12cm 8cm 12cm 8cm · Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played. · MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +). · Use discs recorded with a compression/decompression data rate greater than 128Kbps. · Only files with the "mp3" and extensions can be played. · Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment. · If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played. · For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~ 320Kbps), the sound may skip during playback. Do not use the following types of disc! · LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player. · If such discs are played, a message appears on the TV screen. DVD discs purchased abroad may not play on this player. If such discs are played, a message appears on the TV screen. · A maximum of 500 tracks can be played per CD. · A maximum of 300 folders can be played per CD. CD-R JPEG Discs · Only files with the "jpg" extensions can be played. · If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. · Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played. · JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +). · Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment. Copy Protection · Many DVD discs are encoded with copy protection. Because of this, you should only connect your · DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. · A maximum of 9,999 images can be stored on a single CD. · When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played. · Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all. DVD R/RW, CD-R/RW DivX Discs · Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user might not play. · Software updates for incompatible formats are not supported. (Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.) · Sections with a high frame rate might not be played while playing a DivX file. · For more information about the formats authorized by DivX Networks, Inc., please visit "www.divxnetworks.net". 6 7 Description Front Panel 1 2 3 4 5 6 ENG Rear Panel PREPARATION 1 2 3 4 7 8 9 10 11 12 13 5 6 7 8 9 1. Disc Tray 2. Open/Close button 3. Function button 4. Stop ( ) button 5. Play/Pause ( ) button 6. Volume Control 7. Power ( ) button 11. MIC1 Jack 12. MIC2 Jack 13. Tuning Up & Skip ( ) button Tuning Down & Skip ( ) button 1. Video Output Jack Connect the TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack. 5. 5.1 Channel Speaker Output Connectors 6. Cooling Fan 7. TX Card Connection (WIRELESS) 8. AUX IN 2 Jacks 9. HDMI Output Jack 8. Standby indicator 9. AUX IN 1 Connector 10. USB Connector 2. External Digital Optical Input Jack Use this to connect external equipment capable of digital output. 3. Component Video Output Jacks Connect a TV with component video inputs to these jacks. 4. FM 75 COAXIAL Jack Display 1 2 3 4 5 6 7 8 9 10 11 12 Accessories 13 14 15 16 17 18 19 1. DOLBY DIGITAL indicator 2. DTS Disc indicator 3. LINEAR PCM indicator 4. TITLE indicator 5. GROUP indicator 6. CHAPTER indicator 7. TRACK indicator 8. PROGRAM indicator 9. REPEAT indicator 10. PBC indicator 11. TUNER indicator 12. STEREO indicator 13. PRO LOGIC indicator 14. DVD AUDIO indicator 15. MPEG indicator 16. DSP indicator 17. System Status Display 18. RADIO FREQUENCY indicator 19. SPEAKER indicator Remote Control Video Cable HDMI Cable FM Antenna User's Manual 8 9 Description (Con't) Remote Control 1. DVD RECEIVER button 2. TV button 3. TV/VIDEO button 4. POWER button 5. Number (0~9) buttons 6. REMAIN button 7. STEP button 8. Tuning Preset/CD Skip buttons 9. VOLUME button 10. MENU button 11. AUDIO button 12. PL II EFFECT button 13. PL II MODE button 14. TUNER MEMORY, SD(Standard Definition)/HD(High Definition) button 15. ZOOM button 16. SLEEP button 17. SLOW, MO/ST button 18. ECHO, NT/PAL button 19. DVD button TUNER button USB, AUX button 20. OPEN/CLOSE button 21. DIMMER button 22. CANCEL button 23. REPEAT button 24. PLAY/PAUSE button STOP button SEARCH buttons 25. TUNING/CH button 26. MUTE button 27. RETURN button 28. Cursor/ENTER button 29. SUBTITLE button 30. EXIT button 31. DSP/EQ button 32. INFO button 33. SOUND EDIT button 34. DIGEST button 35. TEST TONE button 36. MIC VOL button 37. SLIDE MODE button 38. LOGO button ENG Insert Remote Batteries 1 2 3 PREPARATION Remove the battery cover in the direction of the arrow. Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and ­). Replace the battery cover. Follow these precautions to avoid leaking or cracking cells: · Place batteries in the remote control so they match the polarity : (+) to (+) and (­) to (­). · Use the correct type of batteries. Batteries that look similar may differ in voltage. · Always replace both batteries at the same time. · Do not expose the batteries to heat or a flame. 1 2 3 4 19 20 21 5 6 7 8 22 23 24 Operation Range of the Remote Control The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor. 9 25 26 10 27 28 29 11 12 13 14 15 16 17 30 31 32 33 34 35 36 37 18 38 10 11 Connecting the Speakers Before moving or installing the product, be sure to turn off the power and disconnect the power cord. ENG HT-X30/X40 Center Speaker Front Speaker (R) Front Speaker (L) HT-TX35/TX45 Center Speaker Front Speaker (R) Front Speaker (L) CONNECTIONS Rear Speaker (R) Rear Speaker (L) Rear Speaker (R) Subwoofer Subwoofer Rear Speaker (L) Position of the DVD Player · Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TVs 2~2.4m (6~8feet) For 55" TVs 3.5~4m (11~13feet) Connecting the Speakers 1 2 Front Speakers L R · Place these speakers in front of your listening position, facing · · inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers. Black Red 1 2 3 Press down the terminal tab on the back of the speaker. Insert the black wire into the black terminal (­) and the red wire into the red (+) terminal, and then release the tab. Connect the connecting plugs to the back of the Home Theater. · Make sure the colors of the speaker terminals match the colors of the connecting plugs. Rear Speakers · Place these speakers behind your listening position. · If there isn't enough room, place these speakers so they face · Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward. Unlike and center speakers, the rear speakers * used tothe front mainly sound effects and sound will not are handle come from them all the time. each other. SL SR Center Speaker C · It is best to install it at the same height as the front speakers. · You can also install it directly over or under the TV. Subwoofer SW · The position of the subwoofer is not so critical. Place it anywhere you like. · Do not let children play with or near the speakers. They could get hurt if a speaker falls. · When connecting the speaker wires to the speakers, make sure that the polarity (+/­) is correct. · Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. · Do not hang the subwoofer on the wall through the duct (hole). · If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set. 12 13 Speaker Installation You have the option of installing the speakers on Stands, or directly to the Stand Base. Connecting the Optional Wireless Receiving Amplifier To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and TX card from your Samsung retailer. ENG Speaker Components (HT-TX35 only) When you have Purchased the Wireless Receiving Module (SWA-3000) HT-X30/X40 Center Speaker Front Speaker (R) Front Speaker (L) SPEAKER STAND STAND BASE Screw (A) Screw (B) CONNECTIONS How to Install the Speaker on the Stand 1 2 1 2 3 Turn the STAND upside-down and connect it to the STAND BASE. Insert two screws (A) into the two holes marked with arrows using a screwdriver as shown in the illustration. Insert a screw (B), into the hole on the rear of the Speaker STAND. Connect the assembled stand to the SPEAKER. Insert another screw (B) into the hole on the rear of the speaker using a screwdriver as shown in the illustration. This is the SPEAKER successfully assembled with the Stand. · Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over. Rear Speaker (L) Rear Speaker (R) Subwoofer 3 4 4 5 5 6 WIRELESS RECEIVER MODULE 6 HT-TX35/TX45 Front Speaker (R) Front Speaker (L) Center Speaker How to Install the Speaker on the Stand Base 1 2 1 2 3 Connect the SPEAKER with the STAND BASE. Insert the screw (B) into the hole on the rear of the speaker using a screwdriver as shown in the illustration. This is the SPEAKER successfully assembled with the Stand Base. Subwoofer 3 Rear Speaker (L) WIRELESS RECEIVER MODULE Rear Speaker (R) 14 15 Connecting the Optional Wireless Receiving Amplifier (Con't) Resetting the Wireless Receiving Module Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does not light up and the "REAR CHECK" message blinks on the main unit's display. Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode. ENG TX card Slanted side faces down 1 With the main unit turned off, press and hold the remote control's REMAIN button for 5 seconds. The STANDBY LED on the front panel of the wireless receiver module CONNECTIONS blinks. 2 1 2 Connect the front, center and Subwoofer speakers to the DVD Player, reffering to pages 12~14. With the DVD Player turned off, insert the TX card into the TX Card Connection(WIRELESS) on the back of the main unit. Hold the TX card so that the slanted side faces downward and insert the card into the port. The TX card enables communication between the main unit and the wireless receiver. With the wireless receiver module turned on, use a ball point pen or a pair of toothpick to press the RESET button on the back of the unit. The STANDBY LED on the front panel of the wireless receiver module blinks 2 Times. 3 Turn on the main unit. The LINK LED of the wireless receiver module is lit and the Reset is completed. If Power Standby mode continues, repeat Steps 1 to 3 above. 3 4 Connect the left and right rear speakers to the wireless receiving module. Plug the power cord of the wireless receiving module in the wall outlet and switch the power switch `ON'. · When the wireless receiving module setting is complete, no sound is output from the Rear Speaker Output Connectors on the back of the main unit. · The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and moisture. · For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions. · Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode · Do not insert a card other than the TX card dedicated for the product. The product might be damaged or the card may not be removed easily. · Do not insert the TX card upside down or in the reverse direction. · Insert the TX card when the DVD Player is turned off. Inserting the card when it is turned on may cause a problem. · If the TX Card is inserted, sound is not output from the Rear Speaker connectors on the main unit. only. · In 2-CH mode, no sound will be heard from the wireless rear speakers. · Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the main unit, some sound interruption may be heard due to interference. · If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference. · The transmission distance of a radio wave is about 10m, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal. 16 17 Connecting the Video Out to your TV Choose one of the three methods for connecting to a TV. HDMI Function Resolution Selection This function allows the user to select the screen resolution for HDMI output. ENG In Stop mode, press and hold the SD/HD (Standard Definition/High Definition) button on the remote control. Resolutions available for the HDMI output are 576p(480p), 720p and 1080i. SD(Standard Definition) resolution is 576p(480p) and HD(High Definition) resolution is 720p/1080i. METHOD 3 (supplied) METHOD 1 (supplied) METHOD 2 Why use HDMI (High Definition Multimedia Interface)? This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection. · If the TV does not support the configured resolution, you will not be able to see the picture properly. · When an HDMI cable is connected, composite and component video signals are not output. · See your TV owner's manual for more information on how to select the TV's Video Input source. CONNECTIONS Using Anynet+(HDMI-CEC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+. METHOD 1 : HDMI ....... (Best Quality) Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV. With Anynet+ You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control. 1 2 Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 18) Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) METHOD 2 : Component Video ....... (Better Quality) If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input jacks on your TV. You can operate the Home Theater by using the TV remote control. (Available TV buttons : , , , , , and , buttons, ~ button) If you select the TV Set the Anynet+(HDMI-CEC) to on your TV. MOVE MOVE ENTER ENTER EXIT EXIT METHOD 3 : Composite Video ....... (Good Quality) Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on your TV. : You can listen to audio through the Home Theater. : You can listen to audio through the TV. If you select the THEATER · This product operates in Interlace scan mode (576i, 480i) for component output. · If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate Select and set the option of each items below. : If Anynet+(HDMI-CEC) set to on and you select View TV, the Home Theater will automatically switched to DIGITAL IN. : You can access the Home Theater menu. : The Home Theater disc playback information will be displayed. : You can listen to audio through the Home Theater. : You can listen to audio through the TV. the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC). · Please check the logo (If your TV has an logo, then it supports the Anynet+ function.) MOVE ENTER EXIT · The Theater function is available only when you listen to the audio through the Home Theater with the digital optical cable connected. · If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off. · Anynet+ (HDMI-CEC) will only work while in the DVDmode. 18 19 Connecting Audio from External Components AUX1 : Front Panel AUX2 : Rear Panel OPTICAL : Rear Panel ENG Audio Cable (not supplied) Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. CONNECTIONS Optical Cable (not supplied) AUX1 : Connecting an External Component/MP3 player Components such as an MP3 Player OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1 2 Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player. Press the AUX button on the remote control to select input. 1 2 Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital component. Press the AUX button on the remote control to select . You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD DIGITAL IN AUX 1 AUX 2 USB FM. AUX2 : Connecting an External Analog Component Analog signal components such as a VCR. You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD DIGITAL IN AUX 1 AUX 2 USB FM. 1 2 Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component. Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating. Be sure to match connector colors. Press the AUX button on the remote control to select input. Please observe the following cautions for your safety. You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD DIGITAL IN AUX 1 AUX 2 USB FM. Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise and may damage it. Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result. · You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product. 20 21 Connecting the FM Antenna Before Reading the User's Manual Make sure to check the following terms before reading the user manual. ENG Icons that will be used in manual Icon Term DVD Definition This involves a function available with DVD or DVD-R/DVD-RW discs that have been recorded and finalized in Video Mode. This involves a function available with a Video CD (CD-R or CD-RW). This involves a function available with a data CD (CD-R or CD-RW). This involves a function available with CD-R/-RW discs. This involves a function available with CD-R/-RW discs. This involves a function available with MPEG4 discs. (DVD R/RW, CD-R or CD-RW) FM Antenna (supplied) DVD VCD VCD CD MP3 JPEG DivX CAUTION CD MP3 JPEG DivX OPERATION This involves a case where a function does not operate or settings may be cancelled. This involves tips or instructions on the page that help each function operate. 1 2 Connect the FM antenna supplied to the FM 75 COAXIAL Jack. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. · This unit does not receive AM broadcasts. NOTE Connecting Microphone You can enjoy the feeling of a karaoke bar in the comfort of your home. Watch the video and sing along the lyrics displayed on the TV screen against the accompaniment. · In this manual, the instructions marked with "DVD ( DVD )" are applicable to DVD-VIDEO, DVD-AUDIO and DVD-R/-RW discs that have been recorded in Video Mode and then finalized. Where a particular DVD type is mentioned, it is indicated separately. · If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable. 1 Connect the microphone to the MIC jack on the front panel. You can connect up to two microphones. 2 3 Press the MIC VOL button to adjust the voice volume of the microphone. Press the ECHO button to adjust the echo level of the microphone. · If you hear strange noises (squealing or howling) while using the Karaoke feature, move the microphone away from the speakers. Turning down the microphone volume or the speaker volume is also effective. · When connected a MIC, HDMI output is not available. 22 23 Before Using Your Home Theater To Operate your Samsung TV and the Home Theater with the HT-X30/HT-TX35's Remote Control The DVD Home Theater's remote can be used to control Samsung TVs. Disc Playback DVD VCD CD ENG 1 Plug the main unit's power cord into the AC power supply. Before plugging your system into a main socket, you must check the voltage setting. If the voltage of the socket does not correspond to the setting on the rear of the unit, you may seriously damage your system. 1 2 3 Press the OPEN/CLOSE button to open the disc tray. Load a disc. Place a disc gently into the tray with the disc's label facing up. Close the compartment by pressing the OPEN/CLOSE button again. 2 3 4 Press the TV button to set the remote to TV mode. Press the POWER button to turn on your Samsung TV with this remote. Press the TV/VIDEO button to select VIDEO mode on your TV. VIDEO Playback starts automatically. OPERATION To stop playback, press the STOP ( ) button during playback. 5 6 Press the DVD RECEIVER button to switch to DVD RECEIVER mode to operate the DVD Home Theater Press the FUNCTION button on the main unit or DVD button on the remote to enable DVD/CD playback. If pressed once, is displayed and the stop position will be stored in memory. If the PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.) If pressed twice, is displayed, and if the PLAY/PAUSE ( ) button is pressed, playback starts from the beginning. ) button during playback. ) button again. To temporarily pause playback, press the PLAY/PAUSE ( To resume playback, press the PLAY/PAUSE ( · Depending on the content of the disc, the initial screen may appear different. Selecting the Video Format Press and hold the NT/PAL button on the remote controller for over 5 seconds while the power is turned off. By default, the video format is set to . or will appear in the display. At this time, press the NT/PAL button shortly to select between and . Each country has a different video format standard. For normal playback, the video format of the disc must be the same as the video format of your TV. · Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) recommendations. 24 25 MP3/WMA-CD Playback Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played. MP3