User manual SAMSUNG LA32R81BD

LCD TV Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM SOUTH AFRICA U.A.E Customer Care Centre 1300 362 603 800-810-5858 , 010- 6475 1880 3698 - 4698 3030 8282 1800 1100 11 0800-112-8888 0120-327-527 1800-88-9999 1800-10-SAMSUNG (7267864) 1800-SAMSUNG (7267864) 1800-29-3232 02-689-3232 0800-329-999 1 800 588 889 0860 7267864 (SAMSUNG) 800SAMSUNG (7267864) 8000-4726 Web Site www.samsung.com/au www.samsung.com.cn www.samsung.com/hk www.samsung.com/in www.samsung.com/id www.samsung.com/jp www.samsung.com/my www.samsung.com/ph www.samsung.com/sg www.samsung.com/th www.samsung.com/tw www.samsung.vn www.samsung.com/za www.samsung.com/mea LA32R81BD LA40R81BD LA40M81BD LA46M81BD LA52M81BD Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PC DISPLAY PICTURE IN PICTURE (PIP) TELETEXT BN68-01180A-01 Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. Model _______________ Serial No. _______________ Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. · Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. · Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. · Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the `brightness' and `contrast' when displaying still images. © 2007 Samsung Electronics Co., Ltd. All rights reserved. English Contents ConneCting and PreParing Your tV List of Parts .......................................................3 Installing the Stand ...........................................3 Installing the Wall Mount Kit ..............................3 Viewing the Control Panel.................................4 Viewing the Connection Panel ..........................5 Viewing the Remote Control .............................8 Installing Batteries in the Remote Control.........9 Switching On and Off ........................................9 Placing Your Television in Standby Mode .........9 Plug & Play .....................................................10 Setting the ChannelS Storing Channels Automatically ......................11 Storing Channels Manually .............................12 Setting the Channel Manager .........................13 Activating the Child Lock.................................13 Sorting the Stored Channels ...........................14 Assigning Channels Names ............................14 Fine Tuning Channel Reception......................15 LNA(Low Noise Amplifier) ...............................15 Changing the Picture Standard .......................16 Setting the PiCture Adjusting the Custom Picture..........................16 Changing the Colour Tone ..............................17 Configuring Detailed Settings on the Picture ..18 Activating Backlight. .......................................19 Changing the Picture Size ..............................19 Freezing the Current Picture ...........................20 Digital NR / Active Colour / DNIe / Movie Plus .....................................................20 Resetting the Picture Settings to the Factory Defaults ...........................................................21 Viewing the Picture In Picture (PIP) ................21 Setting the Sound Changing the Sound Standard........................23 Adjusting the Sound Settings ..........................23 Setting the TruSurround XT (SRS TS XT) ......24 Adjusting the Volume Automatically ................24 Selecting the Internal Mute .............................25 Listening to the Sound of the Sub Picture.......25 Resetting the Sound Settings to the Factory Defaults ...........................................................26 Connecting Headphones ................................26 Selecting the Sound Mode ..............................26 Setting the time Setting and Displaying the Current Time ........27 Selecting the Sleep Timer ...............................27 Switching the Television On and Off Automatically...................................................28 FunCtion deSCriPtion Using Game Mode ..........................................29 Setting the Blue Screen Mode / Selecting the Melody ......................................29 Setting the Home Theatre PC .........................30 Setting the Light Effect (LA32R81BD,LA40R81BD).............................30 Using the Energy Saving Feature ...................31 HDMI Black Level ...........................................31 uSing the dtV Feature Previewing the DTV Menu System .................32 Updating the Channel List Automatically ........33 Updating the Channel List Manually ...............33 Editing Your Favourite Channels.....................34 Selecting Channel List ....................................36 Displaying Programme Information.................36 Viewing the EPG (Electronic Programme Guide) Information ....37 Using the Scheduled List ................................38 Setting the Default Guide ................................38 Viewing All Channels and Favourite Channels .........................................39 Selecting the Time Zone .................................39 Adjusting the Menu Translucency ...................40 Setting up the Parental Lock ...........................40 Setting the Subtitle ..........................................41 Selecting the Audio Format .............................41 Viewing Product Information ...........................41 Checking the Signal Information .....................42 Upgrading the Software ..................................42 Resetting .........................................................44 Selecting the Preferred Language (Subtitle , Audio) ................................................. 44 english - uSing the teletext Feature Selecting the Source .......................................45 Editing the Input Source Names .....................45 Teletext Decoder .............................................46 Displaying the Teletext Information .................46 Selecting a Specific Teletext Page ..................47 Using Fastext to Select a Teletext Page .........47 Setting Up Your Remote Control .....................48 Remote Control Codes ...................................50 Setting the PC Setting up Your PC Software (Based on Windows XP) .................................53 Display Modes ................................................53 Setting the PC .................................................55 Wall-Mount Adjustment (LA40R81BD, LA40M81BD, LA46M81BD, LA52M81BD) (Sold separately) ....56 reCommendationS For uSe Using the Anti-Theft Kensington Lock .............61 Troubleshooting: Before Contacting Service Personnel .............61 Technical and Environmental Specifications ..62 Symbol Press Important Note One-Touch Button about anYnet+ What is Anynet+? ............................................ 57 Connecting Anynet+ Devices ........................... 57 Setting Up Anynet+ .......................................... 58 Scanning and Switching between Anynet+ Devices ............................................................ 58 Recording ......................................................... 59 Listening through a Receiver ........................... 60 Check Points before Requesting Service ......... 60 english - list of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4 X L16 Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Stand Screw X4 Safety Guide Stand Cleaning Cloth Registration Card Owner's Instructions Warranty card Warranty card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model. installing the Stand <> <> . Place the TV faced down on a soft cloth or cushion on a table. . Put the stand into the hole at the bottom of the TV. . Insert screw into the hole indicated and tighten. The stand is installed for models with the screen size of 40 inch and above. installing the Wall mount Kit Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Remove the stand and cover the bottom hole with a cap and fasten with two screws. english - Viewing the Control Panel LA32R81BD, LA40R81BD 1 2 3 4 5 POWER 6 7 LA40M81BD, LA46M81BD, LA52M81BD 1 2 3 4 Front Panel buttons Touch the right side of each button to operate. 56 7 The product colour and shape may vary depending on the model. 1 SourCe 4 Ch Toggles between all the available input Press to change channels. sources (TV, AV1, AV2, S-Video, Component1, In the on-screen menu, use the CH Component2, PC, HDMI1, HDMI2, HDMI3, buttons as you use the and buttons on DTV). In the on-screen menu, use this button the remote control. as you use the enter/oK button on the (Without the Remote Control, you can turn on remote control. the TV by using the Channel buttons.) 2 menu Press to see an on-screen menu of your TV's features. 3 + Vol Press to increase or decrease the volume. In the on-screen menu, use the + VOL buttons as you use the + and - buttons on the remote control. 5 (Power) Press to turn the TV on and off. Power indicator Blinks and turns off when the power is on and lights up in stand-by mode. 6 remote Control Sensor Aim the remote control towards this spot on the TV. 7 Speakers english - Viewing the Connection Panel 1 2 3 4 3 5 ! 0 Power Input 9 8 7 6 Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1Connecting external a/V devices (aV in ) - Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. 2 Connecting audio - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater. english - 3Connecting hdmi in , hdmi in , hdmi in - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players) - No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI? - "High Definition Multimedia interface" allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels). - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. Connecting dVi in(hdmi )(audio r/l) - When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture. - When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 IN terminal. You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the "R - AUDIO - L" terminal on DVI for sound output. Supported modes for HDMI/DVI and Component 480i 480p 576i 576p 720p 1080i 1080p HDMI/DVI 50Hz X X X O O O O HDMI/DVI 60Hz X O X X O O O Component O O O O O O O -"1080p is for LA40M81BD, LA46M81BD, LA52M81BD only" - Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed) 4Connecting an aerial or Cable television network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 6 Connecting external a/V devices - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre sponding audio out connectors on the A/V device. - Headphone may be connected to the headphone output (5) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled. 7 Connecting Computer - Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer. 8digital audio out (oPtiCal) - Connect to a Digital Audio Component. 9 SerViCe, SerViCe - Service connection for qualified service engineer. english - 0 Connecting Component devices (dVd) - Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DVD. - If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the DVD to component connector ("PR", "PB", "Y") on your set. - The PR, PB and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. - Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DVD. - This LCD TV displays its optimum picture resolution in 720p mode. - This LCD TV displays its maximum picture resolution in 1080i mode. !Kensington lock - The Kensington lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The place of the Kensington Lock may be different depending on its model. english - Viewing the remote Control 1Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) (Refer to page 50-52) 2Television Standby button 3Number buttons for direct channel access 4One/Two-digit channel selection 5It display "Channel List" on the screen. 6Selects the TV and DTV mode directly 7VCR/DVD Functions Rewind, Stop, Play/Pause, Fast/Forward 8 Volume increase Volume decrease 9Temporary sound switch-off 0Menu display and change confirmation ! Returns to the previous menu #Electronic Program Guide (EPG) display $Picture size selection %Sound effect selection ^Adjusts 5 separate devices - TV, DVD, STB, CABLE, or VCR. &When pressing this button, a number of buttons on the remote control (e.g. Selects a target device, volume, channel buttons) light up for a few seconds and then turn off to save power. This function is to conveniently use the remote control at night or when dark. *Available source selection (Previous channel )DTV menu display aRecords for Live Broadcasting (Anynet+ function only, Refer to page 57) bP : Next channel P : Previous channel cExit the OSD dControl the cursor in the menu eUse to see information on the current broadcast fRuns the Anynet view functions and sets up Anynet devices. gColour buttons : Press to add or delete channels and to store channels to the favorite channel list in the "Channel List" menu. hPicture-In-Picture On / Off iDigital subtitle display jPicture effect selection kPicture freeze lWhen your remote does not work, change the batteries and press the "RESET" button for 2-3 seconds before use. teletext Functions 6Exit from the teletext display 0Teletext index @Alternately select Teletext, Double, or Mix. $Teletext size selection *Teletext mode selection (LIST/FLOF) (Teletext sub page bP : Teletext next page P : Teletext previous page cTeletext cancel eTeletext reveal gFastext topic selection hTeletext hold jTeletext store The performance of the remote control may be affected by bright light. This is a special remote control for the visually impaired, and has Braille points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons. english - installing batteries in the remote Control . . Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the "+" and "­" ends of the batteries with the diagram inside the compartment. Replace the cover. Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.) . If the remote control doesn't work, check the following: . Is the TV power on? . Are the plus and minus ends of the batteries reversed? . Are the batteries drained? . Is there a power outage, or is the power cord unplugged? . Is there a special fluorescent light or neon sign nearby? Switching on and off the mains lead is attached to the rear of your set. . . Plug the mains lead into an appropriate socket. The standby indicator lights up on the front of the set. Press the button on the front of the set. You also can press the PoWer button or the tV/dtV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or CH button on the right side of the set. To switch your set off, press the PoWer button again. . . Placing Your television in Standby mode Your set can be placed in standby mode in order to reduce the power consumption. the standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). . . Press the PoWer button on the remote control. The screen is turned off and a red standby indicator appears on the front of your set. To switch your set back on, simply press the PoWer , numeric buttons (0~), tV/dtV button or channel up/down ( / ) button again. Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. english - Plug & Play When the tV is initially powered on, several basic settings proceed automatically and subsequently. the following settings are available. . Press the PoWer button on the remote control. The message "Start Plug & Play" is displayed with "OK" selected. Then press the enter/oK button. Plug & Play Start Plug & Play. oK enter exit . The message "Select Home Mode When installing this TV at home" is displayed with "Shop" or "Home" selected Press the or buttons to select "Shop" or "Home", then the enter/oK button. We recommend setting the TV to Home mode for the best picture in your home envronment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the menu button for five seconds on the side panel of the TV. The message "Check antenna input." is displayed with "OK" selected. Press the enter/oK button. Please check that the area cable is connected correctly. The message "Some DTV functions may not be available.Digital Scan?"is displayde with"Yes" or"No" selected,Press the or buttons to select "Yes" or"No",then the enter/oK button. The "Auto Store" menu is displayed with the "Start" selected. Press the enter/oK button. The channel search will start and end automatically. After all the available channels are stored, the "Clock Set" menu appears. Press the enter/oK button at any time to interrupt the memorization process. Press the enter/oK button. Press the or buttons to move to the "Month" , "Day" , "Year", "Hour", "Minute", Set the "Month" , "Day" , "Year", "Hour", "Minute" by pressing the or button. You can also set the hour and minute by pressing the number buttons on the remote control. When you have finished, press the enter/oK button The message "Enjoy your viewing." is displayed. Press the enter/oK button to confirm your setting. auto Store: Automatically scans for and stores channels available in the local area. Clock Set: Sets the current time for the TV clock. . . . . . english - 0 if you want to reset this feature... . Press the menu button to display the menu. Press the or button to select "Setup", then press the enter/oK button. Press the enter/oK button again, to select "Plug & Play". The message to "Start Plug & Play" is displayed. tV Plug & Play language time game mode blue Screen melody PC home theatre PC light effect smore Setup : english : off : off : off : off : off . . move enter return Plug & Play Start Plug & Play. oK enter return - Storing Channels Automatically - Storing Channels Manually tV Channel auto Store manual Store Channel manager Sort name Fine tune lna : off move enter return Storing Channels automatically You can scan for the frequency ranges available to you (and availability depends on your country). automatically allocated programme numbers may not correspond to actual or desired programme numbers. however, you can sort numbers manually and clear any channels you do not wish to watch. . . . Press the menu button to display the menu. Press the or button to select "Channel", then press the enter/oK button. Press the or button to select "Auto Store" then press the enter/oK button. Press the enter/oK button. The TV will begin memorizing all of the available channels. Press the enter/oK button at any time to interrupt the memorization process and return to the "Channel" menu. . After all the available channels are stored, the "Sort" menu appears. english - Storing Channels manually You can store up to 00 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. the programme number of each stored channel which you wish to identify. . . . . . . . . . Press the menu button to display the menu. Press the or button to select "Channel", then press the enter/oK button. Press the or button to select "Manual Store", then press the enter/oK button. Press the enter/oK button to select "Programme". To assign a programme number to a channel, find the correct number by pressing the or button and then press the enter/oK button. You can also set a programme number by pressing number buttons on the remote control. Press the or button to select "Colour System", then press the enter/oK button. Select the colour standard required by pressing the or button then, press the enter/oK button. Press the or button to select "Sound System", then press the enter/oK button. Select the sound standard required by pressing the or button, then press the enter/oK button. If there is an abnormal sound or no sound, re-select the sound system required. If you know the number of the channel to be stored, press the or button to select "Channel". Press the enter/oK button. Select C (Air channel) or S (Cable channel) by pressing the or button. Press the button to select channel. Select the required number by pressing the or button and then press the enter/oK button. Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode) You can also set a channel number by pressing number buttons on the remote control. 0. If you do not know the channel numbers, press the or button to select "Search". Press the enter/oK button. Search by pressing the or button and then press the enter/oK button. . Press the or button to select "Store". Press the enter/oK button to select "OK". . Repeat steps to for each channel to be stored. Programme: Selects a program number for the channel. Colour System: Sets the colour supporting system. Sound System: Sets the sound supporting system. Channel: Selects a channel. Search: Scans for the frequency value for the channel. Store: Saves your settings. english - Setting the Channel manager Set the channels according to your preference. You can easily delete, add, or lock the channel you want. . Press the menu button to display the menu. Press the or button to select "Channel", then press the enter/oK button. Press the or button to select "Channel Manager", then press the enter/oK button. Press the enter/oK button again, to select "Channel List". Press the button to select " " line. Press the or button to select the undesired channel, then press the enter/oK button to cancel. Repeat steps 5 for each channel to be selected or canceled Press the exit button to exit. " " is active when "Child Lock" is selected to "On". Channel list P C / 0 Prog. 0 C-C bbC . . . . . . C C C S S S S add move Page lock enter return You can select these options by simply pressing the Ch liSt button on the remote control. Then you can press the exit button to exit. activating the Child lock this feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child lock cannot be released using the buttons on the side. only the remote control can release the Child lock setting, so keep the remote control away from children. . Press the menu button to display the menu. Press the or button to select "Channel", then press the enter/oK button. Press the or button to select "Channel Manager", then press the enter/oK button. Press the or button to select "Child Lock", then press the enter/oK button. Press the or button to select "On" or "Off". Press the enter/oK button. Press the or button to select "Channel List", then press the enter/oK button. Press the button to select " " line. Press the or button to select the channels you want to lock, then press the enter/oK button. Repeat steps for each channel to be locked or unlocked. Press the exit button to exit. Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active or inactive. english - P C Prog. 0 C-C bbC tV Channel manager Channel list Child lock : off on move enter return . . . . . . . . Channel list bbC / 0 C C C S S S S add move Page lock enter return Sorting the Stored Channels You can exchange the numbers of two channels, in order to: modify the numeric order in which the channels have been automatically stored. give easily remembered numbers to the channels that you watch most often. . . . Press the menu button to display the menu. Press the or button to select "Channel", then press the enter/oK button. Press the or button to select "Sort", then press the enter/oK button. Select the channel number that you wish to change by press ing the or button repeatedly. Press the enter/oK button. The selected channel number and name are moved to right side. Press the or button to move to the position in which you would like to change and then press the enter/oK button. The selected channel is exchanged with the one previously stored to the chosen number. Repeat steps to for another channel to be sorted. Press the exit button to exit. tV Prog. 0 Ch. C-C C C S move r r tV Channel auto Store manual Store Channel manager Sort name Fine tune lna : off move enter Sort name return . enter return . . assigning Channels names Channel names will be assigned automatically when channel information is broadcast. these names can be changed, allowing you to assign new names. . Press the menu button to display the menu. Press the or button to select "Channel", then press the enter/oK button. Press the or button to select "Name", then press the enter/oK button. If necessary, select the channel to be assigned to a new name by pressing the or button. Press the enter/oK button. The selection bar is displayed around the name box. to... Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name then... Press the or button Press the button Press the button tV Channel auto Store manual Store Channel manager Sort name Fine tune lna : off . . move tV Prog. 0 Ch. C-C C C S move r r enter name name --------------------enter return . return Press the enter/oK button The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space, / , * , + ) . . Repeat steps to for each channel to be assigned to a new name. Press the exit button to exit. english - Fine tuning Channel reception use fine tuning to manually adjust a particular channel for optimal reception. . . . . . Use the number buttons to directly select the channel that you want to fine tune. Press the menu button to display the menu. Press the or button to select "Channel", then press the enter/oK button. Press the or button to select "Fine Tune", then press the enter/oK button. Press the or button to adjust the fine tuning. Press the enter/oK button. Press the exit button to exit. Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the fine-tuning, select "Reset" by pressing the or button and then press the enter/oK button. adjust P 0 reset Save return tV Channel auto Store manual Store Channel manager Sort name Fine tune lna : off move enter return Fine tune LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). . Press the menu button to display the menu. Press the or buttons to select "Channel", then press the enter/oK button. Press the or buttons to select "LNA", then press the enter/oK button. Press the or buttons to select "On", or "Off". Press the enter/oK button. Press the exit button to exit. tV tV Channel auto Store manual Store Channel manager Sort name Fine tune lna : off . . . move enter Channel return lna auto Store manual Store Channel manager Sort name Fine tune : off off on move enter return english - Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. . . . . Press the menu button to display the menu. Press the enter/oK button to select "Picture". Press the enter/oK button again, to select "Mode". Press the or button to select the desired picture effect. Press the enter/oK button. Press the exit button to exit. dynamic: Selects the picture for high-definition in a bright room. Standard: Selects the picture for optimum display in a normal environment. movie: Selects the picture for comfortable display in a dark room. The Picture mode must be adjusted separately for each input source. You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 21) tV mode Contrast brightness Sharpness Colour tint g0 Colour tone detailed Settings backlight: smore tV mode Contrast brightness Sharpness Colour tint g0 Colour tone detailed Settings backlight: smore Picture : dynamic 00 r0 : Cool : 0 move enter Picture return : dynamic dynamic Standard 00 movie 0 r0 : Cool : 0 move enter return You can also press the P.mode button on the remote control to select one of the picture settings. adjusting the Custom Picture Your set has several settings which allow you to control picture quality. . . . . To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. on page 16 Press the or button to select a particular item. Press the enter/oK button. Press the or button to decrease or increase the value of a particular item. Press the enter/oK button. Press the exit button to exit. Contrast: Adjusts the lightness and darkness between objects and the background. brightness: Adjusts the brightness of the whole screen. Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. Colour: Adjusts the colours, making them lighter or darker. tint(ntSC or dtV): Adjusts the colour of objects, making them more red or green for a more natural look. The adjusted values are stored according to the selected Picture mode. In PC Mode, Only "Contrast", "Brightness" can be adjusted. tV mode Contrast brightness Sharpness Colour tint g0 Colour tone detailed Settings backlight: smore Picture : dynamic 00 r0 : Cool : 0 move enter return english - Changing the Colour tone You can select the most comfortable colour tone to your eyes. . . . . To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. on page 16 Press the or button to select "Colour Tone", then press the enter/oK button. Press the or button to select the desired colour tone setting. Press the enter/oK button. Press the exit button to exit Cool: Cool: normal: Warm: Warm: Makes the colour temperature bluer than "Cool1" menu. Makes whites bluish. Keeps whites white. Makes whites reddish. Makes the colour temperature redder than "Warm1" menu. tV mode Contrast brightness Sharpness Colour tint g0 Colour tone detailed Settings backlight: smore tV mode Contrast brightness Sharpness Colour tint g0 Colour tone detailed Settings backlight: smore Picture : dynamic 00 r0 : Cool : 0 move enter Picture return 00 Cool r0 : Cool Cool : dynamic move Warm enter return : 0 Warm normal The adjusted values are stored according to the selected Picture mode. When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected. english - Configuring Detailed Settings on the Picture You can set detailed picture settings. Press the menu button to display the menu. Press the enter/oK button, to select "Picture". Press the or button to select Detailed Settings, then press the enter/oK button. Select the required option by pressing the or button, then press the enter/oK button. Available options: Black Adjust, Dynamic Contrast, Gamma, White Balance, My Colour Control, Edge Enhancement, Colour Space. When you are satisfied with your setting, press the enter/oK button. Press the exit button to exit. When the picture mode is set to Movie, Detailed Settings can be selected. If DNIe is Off, the Detailed Settings cannot be selected when the Picture mode is in Standard mode. tV mode Contrast brightness Sharpness Colour tint g0 Colour tone detailed Settings backlight: smore Picture : movie 00 r0 : Cool : 0 move tV enter return detailed Settings black adjust : off dynamic Contrast : off gamma :0 White balance my Colour Control edge enhancement : off Colour Space : auto xvYCC : off move enter return black adjust: off/low/medium/high You can directly select the black level on the screen to adjust the screen depth. dynamic Contrast: off/low/medium/high You can adjust the screen contrast so that the optimal contrast is provided. gamma: - ~ You can adjust the middle brightness of pictures. Press the or button until you reach the optimal setting. White balance: r-offset/g-offset/b-offset/r-gain/g-gain/b-gain/reset You can adjust the color temperature for more natural picture colors. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the enter/oK button. Press the or button until you reach the optimal setting. Reset: The previously adjusted white balance will be reset to the factory defaults. my Colour Control: Pink/green/blue/White/reset This setting can be adjusted to suit your personal preferences. When running the My Colour Control feature, the current picture is captured as a still image before being displayed on the screen. edge enhancement: on/off You can emphasize object boundaries. Colour Space: auto/Wide You can set the color reproduction space for the input signal to Auto or Wide. xVYCC: off/on(la0mbd/lambd/lambd) Setting the xvYCC mode to On increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature. When you set the xvYCC mode to On the PIP will Off automatically. english - activating backlight You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10) . . . Press the menu button to display the menu. Press the enter/oK button, to select "Picture". Press the or button to select "Backlight", then press the enter/oK button. Press the or button to decrease or increase the value of a particular item. Press the enter/oK button. Press the exit button to exit. tV mode Contrast brightness Sharpness Colour tint g0 Colour tone detailed Settings backlight: smore Picture : dynamic 00 r0 : Cool : 0 move enter return backlight adjust return Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. . . . . Press the menu button to display the menu. Press the enter/oK button , to select "Picture". Press the or button to select "Size", then press the enter/oK button. Select the required option by pressing the or button. Press the enter/oK button. Press the exit button to exit. tV : Wide Zoom Zoom : Just Scan tV rmore Picture Size digital nr active Colour dnle movie Plus reset : : : auto : off : off : on : oK move enter Size return :: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. :: This is the default setting for a video movie or normal broadcasting. Just Scan : Displays the input scenes as they are without any cutoff when 720p 1080i(LA32R8 LA40R8)and1080p,1080i, 720p(LA40M81BD LA46M81BD LA52M81BD) signals are input. "Wide Zoom" function is available only in "TV", "AV1", "AV2", and "S-Video", "component1", "component2", "HDMI" mode. In PC Mode, only "16:9" and "4:3" mode can be adjusted. Just Scan Mode is available only HDMI mode Zoom: Select by pressing the or buttons. Use the or button to move the picture up and down.After selecting , use the or button to magnify or reduce the picture size in the vertical direction. Wide Zoom : Move the screen up/down using the or buttons after selecting the by pressing the or enter/oK button. move enter return You can select these options by simply pressing the P.SiZe button on the remote control. english - Freezing the Current Picture Press the Still button to freeze a moving picture into a still one. Press again to cancel. digital nr / active Colour / dnie / movie Plus if the broadcast signal received by your tV is weak, you can activate the digital noise reduction feature to help reduce any static and ghosting that may appear on the screen. . . Press the menu button to display the menu. Press the enter/oK button , to select "Picture". Select the required option by pressing the or button, then press the enter/oK button. Available options: Digital NR, Active Colour, DNIe,Movie Plus. When you are satisfied with your setting, press the enter/oK button. Press the exit button to exit. tV rmore Picture Size digital nr active Colour dnle movie Plus reset : : : auto : off : off : on : oK move enter return . . digital nr: off/low/medium/high/auto If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. active Colour: off/on If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture. This function is not available in PC mode. This function is available in Dynamic mode dnie : off/demo/on This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. This function is not available in Movie mode movie Plus: off/on You can view more natural skin and clear text even in fast moving scenes. Use this function when watching movies. english - 0 resetting the Picture Settings to the Factory defaults You can return to the factory defaults picture settings. . . . . To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3 on page 16. Press the or button to select "Reset", then press the enter/oK button. Press the or button to select "OK"," Cancel", then press the enter/oK button. Press the exit button to exit. The "Reset" will be set for each picture mode. tV rmore Picture Size digital nr active Colour dnle movie Plus reset : : : auto : off : off : on : oK oK Cancel move enter return Viewing the Picture in Picture (PiP) You can display a sub picture within the main picture of set programme or video input. in this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. . . . Press the menu button to display the menu. Press the enter/oK button , to select "Setup". Press the or button to select "PIP", then press the enter/oK button. Press the enter/oK button again. Press the or button to select "On", then press enter/oK button. Press the or button to select "Source",then press enter/oK button. Select a source of the sub picture by pressing the or button and press the enter/oK button. The sub picture can serve different source selections based on what the main picture is set to. Press the or button to select "Size" of the sub picture and then press the enter/oK button. Select a size of the sub picture by pressing the or button and then press the enter/oK button. If main picture is in "HDMI" mode, "Size" is available. tV PiP Source Size Position Programme tV rmore energy Saving hdmi black level PiP : off : low Setup move enter PiP : on : tV : : :P return . move enter return . Press the PiP button on the remote control repeatedly to activate or deactivate the "PIP". english - . Press the or button to select "Position", then press the enter/oK button. Select the position of the sub picture by pressing the or button and then press the enter/oK button. Press the or button to select "Programme" and then press the enter/oK button. You can select the channel that you want to view through sub picture by pressing the or button. Press the enter/oK button. The "Programme" can be active when the sub picture is set to TV. Press the exit button to exit. You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. Source: Used to select a source of the sub picture. Size: Used to select a size of the sub picture. Position: Used to move the sub picture. Programme: Used to Change the sub picture. . . PiP Settings main Sub o: PIP operates, x: PIP doesn't operate tV O O O aV O O O aV O O O S-Video X X X Component, X X X PC X X X hdmi,, X X X Component, PC hdmi,, english - Changing the Sound Standard You can select the type of the special sound effect to be used when watching a given broadcast. . Press the menu button to display the menu. Press the or button to select "Sound", then press the enter/oK button. Press the enter/oK button again, to select "Mode". Select the required sound effect by pressing the or button repeatedly and then press the enter/oK button. Press the exit button to exit. tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Standard : off : off : off : main . . . enter return Standard: Selects the normal sound mode. music: Emphasizes music over voices. movie: Provides live and full sound for movies. Speech: Emphasizes voices over other sounds. Custom: Selects your custom sound settings. (Refer to "Adjusting the Sound Settings") Sound : Custom Standard : off movie : off Speech : off Custom : main music enter return adjusting the Sound Settings the sound settings can be adjusted to suit your personal preferences. . Press the menu button to display the menu. Press the or button to select "Sound", then press the enter/oK button. Press the or button to select "Equalizer", then press the enter/oK button. Press the or button to select a particular item. Press the enter/oK button. Press the or button to reach the required setting. Press the enter/oK button. Press the exit button to exit. If you make any changes to these settings, the Sound Mode is automatically switched to "Custom". balance 00hz 00hz khz khz 0khz balance 00hz 00hz khz khz 0khz tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move tV Sound : Standard : off : off : off : main . . . . enter equalizer return move move adjust adjust return return english - Setting the truSurround xt (SrS tS xt) truSurround xt is a patented SrS technology that solves the problem of playing . multichannel content over two speakers. truSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers. it is fully compatible with all multichannel formats. . Press the menu button to display the menu. Press the or button to select "Sound", then press the enter/oK button. Press the or button to select "SRS TS XT", then press the enter/oK button. Press the or button to select "On" or "Off". Press the enter/oK button. Press the exit button to exit. tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Standard : off : off : off : main enter Sound return . . . : Standard : off off : off on : off : main enter return adjusting the Volume automatically each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. this feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. . Press the menu button to display the menu. Press the or button to select "Sound", then press the enter/oK button. Press the or button to select "Auto Volume", then press the enter/oK button. Press the or button to select "On" or "Off". Press the enter/oK button. Press the exit button to exit. tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Standard : off : off : off : main enter return . . . Sound : Standard : off : off off : off on : main enter return english - Selecting the internal mute if you want to hear the sound through separate speakers, cancel the internal amplifier. . Press the menu button to display the menu. Press the or button to select "Sound", then press the enter/oK button. Press the or button to select "Internal Mute", then press the enter/oK button. Press the or button to select "On" or "Off". Press the enter/oK button. Press the exit button to exit. When "Internal Mute" is set to "On', the Sound menus except for "Sound Select" (in PIP mode) cannot be adjusted. tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Standard : off : off : off : main . . . enter Sound return : Standard : off : off : off off : main on enter return listening to the Sound of the Sub Picture during the PiP features activation, you can listen to the sound of the sub picture. . Press the menu button to display the menu. Press the or button to select "Sound", then press the enter/oK button. Press the or button to select "Sound Select", then press the enter/oK button. Press the or button to select "Main". Press the enter/oK button. Press the exit button to exit. tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off : off : off : main . . . enter Sound : Custom return main : Used to listen to the sound of the main picture. Sub : Used to listen to the sound of the sub picture. You can select this option when the "PIP" is set to "On". : off : off : off : main main Sub enter return english - resetting the Sound Settings to the Factory defaults if game mode is on, the reset Sound function is activated. Selecting the reset function after setting the equalizer resets the equalizer setting to the factory defaults. . Press the menu button to display the menu. Press the or button to select "Sound", then press the enter/oK button. Press the or button to select "Reset", then press the enter/oK button. Press the exit button to exit. You can select this option when the "Game Mode" is set to "On". tV mode equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off : off : off : main . . enter return Connecting headphones You can connect a set of headphones to your set if you wish to watch a tV programme without disturbing the other people in the room. When you insert the head set jack into the corresponding port, you can operate only Auto Volume "SRS TS XT" and Sound Select (in PIP mode) in Sound menu. Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. The headphone volume and TV volume are adjusted differently. Selecting the Sound mode You can set the sound mode by pressing the "dual" button. When you press it, the current sound mode is displayed on the screen. Audio Type FM Stereo NICAM Stereo Mono Stereo Dual Mono Stereo Dual DUAL 1/2 MONO STEREO MONO DUAL 1 DUAL 2 MONO MONO STEREO MONO DUAL 1 DUAL 2 Default Automatic change DUAL 1 Automatic change DUAL 1 You can also set these options simply by pressing the dual button on remote control. If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. english - Setting and displaying the Current time You can set the tV's clock so that the current time is displayed when you press the inFo button. You must also set the time if you wish to use the automatic on/off timers. . Press the menu button to display the menu. Press the or button to select "Setup", then press the enter/oK button. Press the or button to select "Time", then press the enter/oK button. Press the enter/oK button to select "Clock Set". to... Move to "Year" ,"Month" "Day","Hour" or "Minute" Set the "Year" ,"Month" "Day","Hour" or "Minute" Press the enter/oK button. . Press the exit button to exit. If you disconnect the power cord, you have to set the clock again. You can also set hour and minute by pressing the number buttons on the remote control. Press the... or button. or button. move adjust return tV month p 0 q hour 00 tV Plug & Play language time game mode blue Screen melody PC home theatre PC light effect smore Setup : english : : : : : off off off off Watching mode on . . . move enter Clock Set day 0 minute 00 return Year 00 Setting the Sleep timer You can select a time period of between 0 and 0 minutes after which the television automatically switches to standby mode. . Press the menu button to display the menu. Press the or button to select "Setup", then press the enter/oK button. Press the or button to select "Time", then press the enter/oK button. Press the or button to select "Sleep Timer", then press the enter/oK button. Press the or button until the desired time appears (Off, 30, 60, 90, 120, 150, 180). Press the enter/oK button. Press the exit button to exit. The TV automatically switches to standby mode when the timer reaches 0. move enter return tV Plug & Play language time game mode blue Screen melody PC home theatre PC light effect smore Setup : english : : : : : off off off off Watching mode on . . . move tV Clock Set Sleep timer timer timer timer enter time : : : : off 0 0 0 0 0 0 return . english - Switching the television on and off automatically You can set the on/off timers so that the set will: Switch on automatically and turn to the channel of your choice at the time you select. Switch off automatically at the time you select. the first step is to set the television's clock. . Press the menu button to display the menu. Press the or buttons to select "Setup", then press the enter/oK button. Press the or buttons to select "Time", then press the enter/oK button. Press the or buttons to select "Timer 1,Timer 2,Timer 3 ", then press the enter/oK button. Press the or buttons to adjust "On Timer", then press the button to move to the next step. Set other items using the same method as above. Repeat Select a Once, Everyday, Mon-Fri, Mon-Sat, Sat-Sun Adjust a 0~100 Adjust a 00~99 Press the or button tV Plug & Play language time game mode blue Screen melody PC home theatre PC light effect smore Setup : english : : : : : off off off off Watching mode on move tV on time enter timer return . . : : 00 no off time 00 repeat 00 no Volume 0 once Programme 0 move adjust