User manual SAMSUNG LE32A457C1D

Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country AUSTRIA BELGIUM CZECH REPUBLIC DENMARK EIRE FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN SWITZERLAND U.K TURKEY ESTONIA LATVIA LITHUANIA KAZAHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN Customer Care Centre 0800-SAMSUNG (726-7864) 0032 (0)2 201 24 18 844 000 844 Web Site www.samsung.com/at www.samsung.com/be www.samsung.com/cz Distributor pro Ceskou republiku: Samsung Zrt., ceska organizacní slozka Vyskocilova 4, 14000 Praha 4 70 70 19 70 0818 717 100 030-6227 515 3260 SAMSUNG ( 0,15/Min) 08 25 08 65 65 ( 0,15/Min) 01805 - SAMSUNG (726-7864) ( 0,14/Min) 06-80-SAMSUNG (726-7864) 800-SAMSUNG (726-7864) 0035 (0)2 261 03 710 0900-SAMSUNG (726-7864) ( 0,10/Min) 815-56 480 0 801 801 881 022-607-93-33 80820-SAMSUNG (726-7864) 0800-SAMSUNG (726-7864) 902 10 11 30 0771-400 200 0800-SAMSUNG (726-7864) 0845 SAMSUNG (7267864) 444 77 11 800-7267 800-7267 8-800-77777 8-10-800-500-55-500 00-800-500-55-500 8-800-555-55-55 8-10-800-500-55-500 8-800-502-0000 8-10-800-500-55-500 www.samsung.com/dk www.samsung.com/ie www.samsung.com/fi www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com/be www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com www.samsung.com/se www.samsung.com/ch www.samsung.com www.samsung.com www.samsung.ee www.samsung.com/lv www.samsung.lt www.samsung.kz www.samsung.com www.samsung.com www.samsung.uz user manual LCD TV imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register Model Serial No. BN68-01424A-00 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.(See back cover for more information) Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. · Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. · Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. · Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the `brightness' and `contrast' when displaying still images. © 2008 Samsung Electronics Co., Ltd. All rights reserved. English Contents CONNECtING AND PREPARING YOUR tV List of Parts ........................................................ 2 Installing the Stand ............................................. 2 Installing the Wall Mount Kit ............................... 2 Viewing the Control Panel .................................. 3 Viewing the Connection Panel ........................... 4 Viewing the Remote Control............................... 7 Installing Batteries in the Remote Control .......... 8 Switching On and Off ......................................... 8 Placing Your Television in Standby Mode........... 8 Viewing the Menus ............................................. 9 Using the TOOLS Button.................................... 9 Plug & Play ....................................................... 10 USING thE DtV FEAtURE Previewing the DTV Menu System .................. 28 Updating the Channel List Automatically .......... 29 Updating the Channel List Manually ................ 29 Editing Your Favourite Channels ...................... 30 Selecting Channel List ..................................... 32 Displaying Programme Information .................. 32 Viewing the EPG (Electronic Programme Guide) Information ........................................... 33 Using the Scheduled List ................................. 34 Setting the Default Guide ................................. 34 Viewing All Channels and Favourite Channels .... 35 Adjusting the Menu Transparency .................... 35 Setting up the Parental Lock ............................ 36 Setting the Subtitle ........................................... 37 Setting the Subtitle Mode ................................. 37 Selecting the Audio Format .............................. 37 Selecting the Audio Description ....................... 38 Selecting the Digital Text (UK only) .................. 38 Selecting the Time Zone (Spain only) .............. 39 Viewing Product Information ............................ 39 Checking the Signal Information ...................... 40 Upgrading the Software ................................... 40 Viewing Common Interface .............................. 41 Selecting the CI (Common Interface) Menu ..... 41 Resetting .......................................................... 42 Selecting the Preferred Language (Subtitle, Audio or Teletext) .............................. 42 Preference ........................................................... 43 SEttING thE ChANNELS Storing Channels Automatically ........................11 Storing Channels Manually .............................. 12 Adding / Locking Channels .............................. 13 Sorting the Stored Channels ............................ 14 Assigning Channels Names ............................. 14 Fine Tuning Channel Reception ....................... 15 LNA (Low Noise Amplifier) ............................... 15 SEttING thE PICtURE Changing the Picture Standard ........................ 16 Adjusting the Custom Picture ........................... 17 Configuring Detailed Settings on the Picture ... 17 Resetting the Picture Settings to the Factory Defaults ............................................... 18 Changing the Picture Options .......................... 19 SEttING thE PC Setting up Your PC Software (Based on Windows XP) .................................. 44 Display Modes .................................................. 44 Setting up the TV with your PC ........................ 45 What is Anynet+? ............................................ 46 Connecting Anynet+ Devices ........................... 46 Setting Up Anynet+ .......................................... 47 Scanning and Switching between Anynet+ Devices ............................................................ 48 Recording ......................................................... 50 Listening through a Receiver ........................... 50 Check Points before Requesting Service ......... 51 SEttING thE SOUND Sound Features ................................................ 21 Selecting the Sound Mode ............................... 22 Connecting Headphones (Sold separately) ..... 22 AbOUt ANYNEt+ SEttING thE tIME Setting and Displaying the Current Time .......... 23 Setting the Sleep Timer .................................... 23 Switching the Television On and Off Automatically .................................................... 24 FUNCtION DESCRIPtION Choosing Your Language ................................. 24 Melody / Entertainment / Energy Saving ......... 25 Selecting the Source ........................................ 26 Editing the Input Source Names ...................... 27 RECOMMENDAtIONS FOR USE Teletext Feature ............................................... 52 Wall-Mount Adjustment (Sold separately) (depending on the model) ................................ 54 Using the Anti-Theft Kensington Lock (depending on the model) ................................ 55 Troubleshooting: Before Contacting Service Personnel ............................................ 56 Technical and Environmental Specifications ... 57 Symbol Press Note One-Touch Button English - 1 List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4XL16 Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Stand Screw X4 Stand Cleaning Cloth Owner's Instructions Warranty card Safety Guide Registration Cards Warranty card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model. Installing the Stand 2 1 1. Connect your LCD TV and the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when assembling them. . Fasten two screws at position 1 and then fasten two screw at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above. Installing the Wall Mount Kit Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. Remove the stand and cover the bottom hole with a cap and fasten with two screws. English - Viewing the Control Panel Side Panel buttons 1 2 3 4 5 6 8 8 7 The product colour and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV). In the on-screen menu, use this button as you use the ENtER button on the remote control. 2 MENU Press to see an on-screen menu of your TV's features. 3 Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the and buttons on the remote control. Press to change channels. In the on-screen menu, use the buttons as you use the and buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.) 5 (Power) Press to turn the TV on and off. 6 Remote Control Sensor Aim the remote control towards this spot on the TV. 7 Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode. 8 Speakers 4 English - Viewing the Connection Panel LE0A56, LE0A57, LE0A55 [tV Side Panel] [tV Rear Panel] 7 1 2 3 45 6 3 8 Power Input @ ! 9 0 LE6A56, LE6A57, LEA56, LEA57, LEA55, LE7A56, LE7A57 [tV Rear Panel] [tV Side Panel] 4 3 5@ ! 7 1 3 6 8 9 2 0 Power Input The product colour and shape may vary depending on the model. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. English - 1 PC IN [PC] / [AUDIO] - Connect to the video and audio output jack on your PC. 2 COMPONENt IN - Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. - If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set. - The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. - Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. 3hDMI IN 1, hDMI IN , hDMI IN - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players) - No additional Audio connection is needed for an HDMI to HDMI connection. - When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack. What is HDMI? - "High Definition Multimedia interface" allows the transmission of high definition digital video data and multiple channels of digital audio. - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. DVI IN(hDMI) [R-AUDIO-L] - DVI audio outputs for external devices. Supported modes for HDMI/DVI and Component 480i HDMI/DVI 50Hz HDMI/DVI 60Hz Component X X O 480p X O O 576i X X O 576p O X O 720p O O O 1080i O O O 4 AUDIO OUt [R-AUDIO-L] - Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre. 5ANt IN To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 6 SERVICE - LE6A56, LE6A57 Connector for SERVICE only. - LEA56, LEA57, LEA55, LE7A56, LE7A57, LE0A56, LE0A57, LE0A55 Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control. English - 5 7 COMMON INtERFACE Slot - When CI Card isn't inserted in some channels, "Scrambled Signal" is displayed on the screen. - The pairing information containing a telephone number, CI Card ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. - When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated. You must obtain a CI Card from a local cable service provider. Remove the CI Card by carefully pulling it out with your hands since dropping the CI Card may cause damage to it. Insert the CI-Card in the direction marked on it. The place of the COMMON INTERFACE Slot may be different depending on its model. 8 S-VIDEO or VIDEO / R-AUDIO-L - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio out connectors on the A/V device. 9 headphones jack - Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled. 0Kensington Lock (depending on the model) - The Kensington lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The location of the kensington lock may be different depending on its model. ! DIGItAL AUDIO OUt (OPtICAL) - Connect to a Digital Audio Component. When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV. @EXt 1, EXt Connector EXT 1 EXT 2 Video O O Input Audio (L/R) O O RGB O Output Video + Audio (L/R) Only TV or DTV output is available. Output you can choose. -Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. English - 6 Viewing the Remote Control 1Television Standby button 2Selects the TV and DTV mode directly 3Number buttons for direct channel access 4One/Two-digit channel selection 5+ : Volume increase : Volume decrease 6Temporary sound switch-off 7Electronic Program Guide (EPG) display 8 se to quickly select U frequently used functions. 9Use to see information on the current broadcast 0Colour buttons : Use these buttons in the Channel list, etc. @ Press to select the optional display and sound modes for sports, cinema and games. # se these buttons in the U DMA, and Anynet+. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature) $Available source selection %Previous channel ^P : Next channel P : Previous channel & isplays the main on-screen D menu * isplays the Channel List on D screen ( Returns to the previous menu )Control the cursor in the menu aExit the on-screen menu b se this when connecting U a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode.(The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when "Anynet+(HDMI-CEC)" is "On" (see page 47) cPicture size selection dDigital subtitle display e Selects the HDMI mode directly. teletext Functions 2Exit from the teletext display 7Teletext store 8Teletext size selection 9Teletext reveal 0Fastext topic selection !Alternately select Teletext, Double, or Mix. $Teletext mode selection (LIST/FLOF) %Teletext sub page ^ P : Teletext next page P : Teletext previous page &Teletext index (Teletext hold aTeletext cancel TOOLS The performance of the remote control may be affected by bright light. English - 7 Installing batteries in the Remote Control 1. . Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the "+" and "­" ends of the batteries with the diagram inside the compartment. Replace the cover. Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time. . If the remote control doesn't work, check the following: 1. Is the TV power on? 2. Are the plus and minus ends of the batteries reversed? 3. Are the batteries drained? 4. Is there a power outage, or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby? Switching On and Off the mains lead is attached to the rear of your set. 1. . Plug the mains lead into an appropriate socket. The standby indicator lights up on your set. Press the button on your set. You also can press the POWER button or the tV/DtV button on the remote control to turn the TV on. The channel that you were watching last is reselected automatically. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on your set. When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed. To switch your set off, press the POWER button again. . . Placing Your television in Standby Mode Your set can be placed in standby mode in order to reduce the power consumption. the standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. . Press the POWER button on the remote control. The screen is turned off and a red standby indicator appears on your set. To switch your set back on, simply press the POWER , numeric buttons (0~9), tV/DtV button or channel up/down ( / ) button again. Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. English - Viewing the Menus 1. With the power on, press the MENU button. The main menu appears on the screen. The menu' s left side has icons: Picture, Sound, Channel, Setup, Input, Digital Menu. . Press the or button to select one of the icons. Then press the ENtER button to access the icon's submenu. . Press the EXIt button to exit. The on-screen menus disappear from the screen after about one minute. tV Mode : Standard backlight Contrast brightness Sharpness Colour tint G 50 Detailed Settings Picture Options Reset : OK Picture 7 95 5 50 50 R 50 Move Enter Return Using the tOOLS button You can use the tOOLS button to select your frequently used functions quickly and easily. The "Tools" menu change depending on which external input mode you are viewing. 1. Press the tOOLS button. The "Tools" menu will appear. . Press the or button to select a menu. . Press the ////ENtER buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page. · Anynet+ (HDMI-CEC), see page 47 · Picture Mode, see page 16 · Sound Mode, see page 21 · Sleep Timer, see page 23 · SRS TS XT, see page 21 · Energy Saving, see page 26 · Dual l-ll, see page 22 · Auto Adjustment, see page 45 tools Anynet+ (hDMI-CEC) Picture Mode Sound Mode Sleep timer SRS tS Xt Energy Saving Dual l-ll : Standard : Custom : Off : Off : Off : Mono Move Enter Exit English - 9 Plug & Play When the tV is initially powered on, several basic settings proceed automatically and subsequently. the following settings are available. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries. 1. . . Press the POWER button on the remote control. The message "Start Plug & Play." is displayed with "OK" selected. Select the appropriate language by pressing the or button. Press the ENtER button to confirm your choice. Press the or button to select "Store Demo" or "Home Use", then the ENtER button. We recommend setting the TV to "Home Use" mode for the best picture in your home environment. "Store Demo" mode is only intended for use in retail environments. If the unit is accidentally set to "Store Demo" mode and you want to return to "Home Use" (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds . 5. 6. The message "Check antenna input." is displayed with "OK" selected. Press the ENtER button. Please check that the antenna cable is connected correctly. Select the appropriate country by pressing the or button. Press the ENtER button to confirm your choice. The message "Some DTV functions may not be available. Digital Scan?" is displayed. Press the or button to select "Yes" or "No", then press the ENtER button. Yes: First an Analogue TV search is performed and then a Digital TV ch. auto search is performed. No: Only an Analogue TV search is performed. This function is supported for all countries except for the following countries: France, Germany, Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria. 7. The "Auto Store" menu is displayed with the "Start" selected. Press the ENtER button. The channel search will start and end automatically. The DTV channel scan menu appears and the DTV channel is automatically updated. If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV. After all the available channels are stored, the "Clock Set" menu appears. Press the ENtER button at any time to interrupt the memorization process. For detailed descriptions about DTV channel update, refer to page 29 of this manual. After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country. Press the ENtER button. Select the "Month", "Day", "Year", "Hour", or "Min" by pressing the or button. Set the "Month", "Day", "Year", "Hour", or "Min" by pressing the or button. You can also set the "Month", "Day", "Year", "Hour" and "Min" by pressing the number buttons on the remote control. Plug & Play Start Plug & Play. OK Enter . English - 10 9. Press the ENtER button to confirm your setting. The message "Enjoy your viewing" is displayed. When you have finished, press the ENtER button. Even if the ENtER button is not pressed, the message will automatically disappear after several seconds. Language: Select your language. Country: Select your country. Auto Store: Automatically scans for and stores channels available in the local area. Clock Set: Sets the current time for the TV clock. tV Setup Plug & Play Language time Melody Entertainment Energy Saving : English : Off : Off : Off If you want to reset this feature... 1. Press the MENU button to display the menu. Press the or button to select "Setup" then press the ENtER button. Press the ENtER button again, to select "Plug & Play". For further details on setting up options, refer to the page 10. The "Plug & Play" feature is only available in the TV mode. . Move Enter Return Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. however, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENtER button. Press the ENtER button to select "Country". tV Country Auto Store Manual Store Channel Manager Sort Name Fine tune LNA Channel : United Kingdom : Off Move Enter Return . . Select the appropriate country by pressing the or button. Press the ENtER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for DTV is not changed. (Refer to page 29) Press the or button to select "Auto Store", then press the ENtER button. Press the ENtER button. The TV will begin memorizing all of the available channels. Press the ENtER button at any time to interrupt the memorization process and return to the "Channel" menu. After all the available channels are stored, the "Sort" menu appears. (refer to page 14) . 5. 6. English - 11 Storing Channels Manually Not available in DTV or external input mode. You can store television channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENtER button. Press the or button to select "Manual Store", then press the ENtER button. Select the required option by pressing the or button, then press the ENtER button. When you are satisfied with your setting, press the ENtER button. Press the EXIt button to exit. tV Country Auto Store Manual Store Channel Manager Sort Name Fine tune LNA Channel : United Kingdom : Off Move Enter Return tV Programme Colour System Sound System Channel Search Store Manual Store :P1 : Auto : bG :S6 : 10 Mhz :? . . . 5. Move Enter Return Programme (Programme number to be assigned to a channel) - Press the or button until you find the correct number. You can also select the channel number directly by pressing the numeric buttons (0~9). Colour System: Auto/PAL/SECAM/NtSC. - Press the or button to select the required colour standard. Sound System: bG/DK/I/L - Press the or button to select the required sound standard. Channel (When you know the number of the channel to be stored) - Press the or button to select C (Air channel) or S (Cable channel). - Press the button, then press the or button to select the required number. You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required. Search (When you do not know the channel numbers) - Press the or button to start the search. - The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number) - Set to "OK" by pressing the ENtER button. Channel mode - (Programme mode): When completing tuning, the broadcasting stations in your area have been P assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. - (Air channel mode): You can select a channel by entering the assigned number to each air C broadcasting station in this mode. - (Cable channel mode): You can select a channel by entering the assigned number for each S cable channel in this mode. English - 1 Adding / Locking Channels Not available in DTV or external input mode. Using the Channel Manager, you can conveniently lock or add channels. 1. . . . Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENtER button. Press the or button to select "Channel Manager", then press the ENtER button. Adding channels Using the Channel List, you can add channels. Select "Channel List" by pressing the ENtER button. Move to the ( ) field by pressing the , , or button, select a channel to be added, and press the ENtER button to add the channel. tV tV Country Auto Store Manual Store Channel Manager Sort Name Fine tune LNA Channel : United Kingdom : Off Move Enter Return Channel Manager Channel List Child Lock : Off If you press the ENtER button again, the ( ) symbol next to the channel disappears and the channel is not added. " " is active when "Child Lock" is selected to "On". P 1 C Move Enter Return Channel List 1 / 10 5. 6. 7. . Locking channels This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Press the or button to select "Child Lock", then press the ENtER button. Select "On" by pressing the or button, then press the ENtER button. Press the or button to select "Channel List", then press the ENtER button. Move to the " " field by pressing the , , or button, select a channel to be locked, and press the ENtER button. Prog. 0 1 C-C bbC 1 C7 C75 5 C76 6 S 7 S S6 9 S7 Add Move Page Lock Enter Return If you press the ENtER button again, the ( ) symbol next to the channel disappears and the channel lock is cancelled. A blue screen is displayed when "Child Lock" is activated. 9. Press the EXIt button to exit. Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active or inactive. You can select these options by simply pressing the Ch LISt button on the remote control. English - 1 Sorting the Stored Channels this operation allows you to change the programme numbers of the stored channels. this operation may be necessary after using the auto store. tV Country Auto Store Manual Store Channel Manager Sort Name Fine tune LNA Channel : United Kingdom : Off 1. . . Not available in DTV or external input mode. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENtER button. Press the or button to select "Sort", then press the ENtER button. Select the channel number that you wish to change by pressing the or button repeatedly. Press the ENtER button. The selected channel number and name are moved to right side. Press the or button to move to the position in which you would like to change and then press the ENtER button. The selected channel is exchanged with the one previously stored to the chosen number. Repeat steps to for another channel to be sorted. Press the EXIt button to exit. Move Enter Return tV Prog. 0 1 5 6 7 9 Ch. C-C S06 S07 S09 S1 S1 S1 S17 C1 Sort Name ---------------------------------------- . Move Enter Return 5. 6. Assigning Channels Names Channel names will be assigned automatically when channel information is broadcast. these names can be changed, allowing you to assign new names. Not available in DTV or external input mode. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENtER button. Press the or button to select "Name", then press the ENtER button. If necessary, select the channel to be assigned to a new name by pressing the or button. Press the ENtER button. The selection bar is displayed around the name box. to... Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name then... Press the or button Press the button Press the button Press the ENtER button tV Prog. 0 1 5 6 7 9 Ch. C-C S06 S07 S09 S1 S1 S1 S17 C1 tV Country Auto Store Manual Store Channel Manager Sort Name Fine tune LNA Channel : United Kingdom : Off . . Move Enter Return Name Name ----------------------------------------- . Move Enter Return 5. 6. The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (+, -, *, /, space) Repeat steps to for each channel to be assigned to a new name. Press the EXIt button to exit. English - 1 Fine tuning Channel Reception Use fine tuning to manually adjust a particular channel for optimal reception. tV Country Auto Store Manual Store Channel Manager Sort Name Fine tune LNA Channel : United Kingdom : Off 1. . . . 5. Not available in DTV or external input mode. Use the number buttons to directly select the channel that you want to fine tune. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENtER button. Press the or button to select "Fine Tune", then press the ENtER button. Press the or button to adjust the fine tuning. Press the ENtER button. Press the EXIt button to exit. P1 Move Enter Return Fine tune 0 Reset Adjust Save Return Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the fine-tuning, select "Reset" by pressing the or button and then press the ENtER button. LNA (Low Noise Amplifier) If the tV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). tV Country Auto Store Manual Store Channel Manager Sort Name Fine tune LNA Channel : United Kingdom : Off 1. Not available in DTV or external input mode. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENtER button. Press the or button to select "LNA", then press the ENtER button. Press the or button to select "Off" or "On". Press the ENtER button. Press the EXIt button to exit. tV . . . Move Enter Return Channel Country Auto Store Manual Store Channel Manager Sort Name Fine tune LNA : United Kingdom : Off Off On Move Enter Return English - 15 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1. . . . Press the MENU button to display the menu. Press the ENtER button, to select "Picture". Press the ENtER button again, to select "Mode". Press the or button to select the desired picture effect. Press the ENtER button. Press the EXIt button to exit. Dynamic: Selects the picture for high-definition in a bright room. Standard: Selects the picture for optimum display in a normal environment. Movie: Selects the picture for comfortable display in a dark room. The Picture mode must be adjusted separately for each input source. tV tV Mode : Standard backlight Contrast brightness Sharpness Colour tint G 50 Detailed Settings Picture Options Reset : OK Picture 7 95 5 50 50 R 50 Move Enter Return Picture Mode : Standard Dynamic backlight Standard Contrast Movie brightness Sharpness Colour tint G 50 R Detailed Settings Picture Options Reset : OK 7 95 5 50 50 50 Move Enter Return Easy Setting 1. . . . Press the tOOLS button on the remote control. Press the or button to select "Picture Mode". Press the or button to select the required option. Press the EXIt or tOOLS button to exit. tools Anynet+ (hDMI-CEC) Picture Mode Sound Mode Sleep timer SRS tS Xt Energy Saving Dual l-ll : : : : : Standard Custom Off Off Off Mono Move Adjust Exit English - 16 Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 16) . Press the or button to select a particular item. Press the ENtER button. . Press the or button to decrease or increase the value of a particular item. Press the ENtER button. . Press the EXIt button to exit. backlight: Adjusts the screen brightness by adjusting the LCD backlight brightness. (0~10) Contrast: Adjusts the lightness and darkness between objects and the background. brightness: Adjusts the brightness of the whole screen. Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. Colour: Adjusts the colours, making them lighter or darker. tint: Adjusts the colour of objects, making them more red or green for a more natural look. tV Mode : Standard backlight Contrast brightness Sharpness Colour tint G 50 Detailed Settings Picture Options Reset : OK Picture 7 95 5 50 50 R 50 Move backlight Enter Return 7 Move Adjust Return The adjusted values are stored according to the selected Picture mode. In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch) In PC mode, you can only make changes to "Contrast" and "Brightness".(40 inch) In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function. You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18) Configuring Detailed Settings on the Picture You can set detailed picture settings. 1. Press the MENU button to display the menu. Press the ENtER button, to select "Picture". . Press the ENtER button to select "Mode". Press the or button to select "Standard" or "Movie", then press the ENtER button. . Press the or button to select "Detailed Settings", then press the ENtER button. . Select the required option by pressing the or button, then press the ENtER button. 5. When you are satisfied with your setting, press the ENtER button. 6. Press the EXIt button to exit. tV Mode : Standard backlight Contrast brightness Sharpness Colour tint G 50 Detailed Settings Picture Options Reset : OK Picture 7 95 5 50 50 R 50 Move Enter Return tV Detailed Settings black Adjust Dynamic Contrast Gamma Colour Space White balance Flesh tone Edge Enhancement : Off : Medium :0 : Native :0 : On "Detailed Settings" is available in "Standard" or "Movie" mode. In PC mode, you can only make changes to "Dynamic Contrast", "Gamma" and "White Balance" from among the "Detailed Settings" items. Move Enter Return English - 17 black Adjust: Off/Low/Medium/high You can directly select the black level on the screen to adjust the screen depth. Dynamic Contrast: Off/Low/Medium/high You can adjust the screen contrast so that the optimal contrast is provided. Gamma: - ~ + You can adjust the Primary Colour (Red, Green, Blue) Intensity. Press the or button until you reach the optimal setting. Colour Space: Auto/Native/Custom Colour space is a Colour matrix composed of red, green and blue colours. Select your favourite Colour space to experience the most natural Colour. Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources. Native: Native Color Space offers deep and rich color tone. Custom: Adjusts the color range to suit your preference. Customizing the Colour Space Colour: Red/Green/blue/Yellow/Cyan/Magenta Adjusts the Colour range to suit your preference. "Colour" is available when "Colour Space" is set to "Custom". Press the or button to select "Red", "Green", "Blue", "Yellow", "Cyan" or "Magenta". Press the ENtER button. Red/Green/blue: In "Colour", you can adjust the RGB values for the selected colour. Press the or button to select "Red", "Green" or "Blue" to change it. Press the ENtER button. Press the or button to decrease or increase the value of a particular item. Press the ENtER button. Reset: Resets the colour space to the default values. White balance: R-Offset/G-Offset/b-Offset/R-Gain/G-Gain/b-Gain/Reset You can adjust the colour temperature for more natural picture colours. R-Offset/G-Offset/b-Offset/R-Gain/G-Gain/b-Gain: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the ENtER button. Press the or button until you reach the optimal setting. Reset: The previously adjusted white balance will be reset to the factory defaults. Flesh tone: -15 ~ +15 You can emphasize the pink 'flesh tone' in the picture. Press the or button until you reach the optimal setting. Changing the adjustment value will refresh the adjusted screen. Edge Enhancement: Off/On You can emphasize object boundaries in the picture. Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1. . . . To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3 on page 16. Press the or button to select "Reset", then press the ENtER button. Press the or button to select "OK" or "Cancel". Press the ENtER button. Press the EXIt button to exit. The "Reset" will be set for each Picture mode. English - 1 tV Picture Mode : Standard backlight Contrast brightness Sharpness Colour tint G 50 Detailed Settings Picture Options Reset : OK OK Cancel 7 95 5 50 50 R 50 Move Enter Return Changing the Picture Options 1. . . . 5. Press the MENU button to display the menu. Press the ENtER button, to select "Picture". Press the or button to select "Picture Options", then press the ENtER button. Select the required option by pressing the or button, then press the ENtER button. When you are satisfied with your setting, press the ENtER button. Press the EXIt button to exit. In PC mode, you can only make changes to the "Colour Tone" and "Size" from among the items in "Picture Options". tV Picture Mode : Standard backlight Contrast brightness Sharpness Colour tint G 50 Detailed Settings Picture Options Reset : OK 7 95 5 50 50 R 50 Move Enter Return tV Picture Options Colour tone Size Screen Mode Digital NR DNle hDMI black Level blue Only Mode : Normal : Auto Wide : 16:9 : Auto : Off : Normal : Off Colour tone: Cool/Cool1/Normal/Warm1/Warm You can select the most comfortable colour tone to your eyes. The adjusted values are stored according to the selected Picture mode. Move Enter Return "Warm1" or "Warm2" is only activated when the picture mode is "Movie". Size: Auto Wide/16:9/Wide Zoom/Zoom/:/Just Scan You can select the picture size which best corresponds to your viewing requirements. Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. :: This is the default setting for a video movie or normal broadcasting. Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component (1080i) signals are input. "Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode. In PC Mode, only "16:9" and "4:3" mode can be adjusted. Settings can be adjusted and stored for each external device you have connected to an input of the TV. Temporary image retention may occur when viewing a static image on the set for more than two hours. Wide Zoom: Move the screen up/down using the or button after selecting the by pressing the or ENtER button. Zoom: Select by pressing the or button. Use the or button to move the picture up and down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction. After selecting "Just Scan" in hDMI (100i) or Component (100i) mode: Select by pressing the or button. Use the , , or button to move the picture. Reset: Press the or button to select "Reset", then press the ENtER button. You can initialize the setting. O You can select these options by simply pressing the P.SIZE button on the remote control. English - 19 Screen Mode: 16:9/ Wide Zoom/Zoom/: When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 16:9: Sets the picture to 16:9 wide mode Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. :: Sets the picture to 4:3 normal mode. This function is available in "Auto Wide" mode. This function is not available in "Component" or "HDMI" mode. Digital NR: Off/Low/Medium/high/Auto If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. When the signal is weak, select one of the other options until the best picture is displayed. DNIe: Off/Demo/On This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. "DNIe" is only available in "Dynamic" mode. hDMI black Level: Normal/Low You can select the black level on the screen to adjust the screen depth. This function is active only when the external input connects to HDMI(RGB signals). blue Only Mode: Off/On This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter. "Blue Only Mode" is available when the picture mode is set to "Movie" or "Standard". English - 0 Sound Features 1. . . . Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENtER button. Select the required option by pressing the or button, then press the ENtER button. When you are satisfied with your setting, press the ENtER button. Press the EXIt button to exit. Mode: Standard/Music/Movie/Speech/Custom You can select the type of special sound effect to be used when watching a given broadcast. Easy Setting 1. Press the tOOLS button on the remote control. . Press the or button to select "Sound Mode". . Press the or button to select the desired sound mode. . Press the EXIt or tOOLS button to exit. Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz The sound settings can be adjusted to suit your personal preferences. If you make any changes to these settings, the sound mode is automatically switched to "Custom". Move Enter Return tV Mode Equalizer SRS tS Xt Auto Volume tV Speaker Sound : Custom : Off : Off : On tools Anynet+ (hDMI-CEC) Picture Mode Sound Mode Sleep timer SRS tS Xt Energy Saving Dual l-ll : : : : : Standard Custom Off Off Off Mono Move Adjust Exit tV R Equalizer L balance 100hz 00hz 1khz khz 10khz Move Adjust Return SRS TS XT: Off/On TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. Easy Setting 1. Press the tOOLS button on the remote control. . Press the or button to select "SRS TS XT". . Press the or button to select the "Off" or "On". . Press the EXIt or tOOLS button to exit. tools Anynet+ (hDMI-CEC) Picture Mode Sound Mode Sleep timer SRS TS XT Energy Saving Dual l-ll : Standard : Custom : Off Off : Off : Mono Move Adjust Exit truSurround Xt, SRS and Symbol are trademarks of SRS Labs, Inc.truSurround Xt technology is incorporated under license from SRS Labs, Inc. English - 1 Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. TV Speaker: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier. The +, - and MUtE buttons do not operate when the "TV Speaker" is set to "Off". When "TV Speaker" is set to "Off", the Sound menus cannot be adjusted. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Selecting the Sound Mode You can set the sound mode in the "tools" menu. When you set to "Dual I-II", the current sound mode is displayed on the screen. 1. . . . Press the tOOLS button on the remote control. Press the or button to select "Dual I-II". Press the or button to select required option. Press the ENtER button. A2 Stereo NICAM Stereo Audio Type Mono Stereo Dual Mono Stereo Dual Dual 1/2 MONO STEREO MONO DUAL 1 DUAL 2 MONO MONO STEREO MONO DUAL 1 DUAL 2 Default Automatic change DUAL 1 Automatic change DUAL 1 tools Anynet+ (hDMI-CEC) Picture Mode Sound Mode Sleep timer SRS tS Xt Energy Saving Dual l-ll : Standard : Custom : Off : Off : Off Mono Move Adjust Exit If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in Analogue TV mode. Connecting headphones (Sold separately) You can connect a set of headphones to your set if you wish to TV Side Panel watch a tV programme without disturbing the other people in the room. When you insert the head set jack into the corresponding port, you can operate only "Auto Volume" in Sound menu. Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. The headphone volume and TV volume are adjusted differently. English - Setting and Displaying the Current time You can set the tV's clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENtER button. Press the or button to select "Time", then press the ENtER button. Press the ENtER button to select "Clock Set". Press the... or button. or button. ENtER button. Move Adjust Return tV Setup Plug & Play Language time Melody Entertainment Energy Saving : English : Off : Off : Off . . . Move Enter Return tV Month