User manual SAMSUNG LE32S81B

LCD TV LE26S8 LE32S8 LE37S8 LE40S8 LE46S8 Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PC DISPLAY PICTURE IN PICTURE (PIP) TELETEXT Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. Model _______________ Serial No. _______________ BN68-01177B-01 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. · Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. · Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. · Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the `brightness' and `contrast' when displaying still images. © 2007 Samsung Electronics Co., Ltd. All rights reserved. English Contents ConnECting and PrEParing Your tV ListofParts.......................................................2 InstallingtheStand...........................................2 InstallingtheWallMountKit..............................2 ViewingtheControlPanel ................................3 . ViewingtheConnectionPanel..........................4 ViewingtheRemoteControl.............................7 InstallingBatteriesintheRemoteControl........8 . SwitchingOnandOff........................................8 PlacingYourTelevisioninStandbyMode.........8 Plug&Play.......................................................9 SEtting thE timE Setting and Displaying the Current Time........26 SettingtheSleepTimer..................................27 . SwitchingtheTelevisionOnandOff Automatically..................................................27 . FunCtion dESCriPtion ChoosingYourLanguage...............................28 . UsingGameMode..........................................28 Setting the Blue Screen Mode / SelectingtheMelody.....................................29 . SettingtheHomeTheaterPC.........................29 UsingtheEnergySavingFeature...................30 SelectingtheSource.......................................31 EditingtheInputSourceNames.....................31 SEtting thE ChannElS StoringChannelsAutomatically......................10 StoringChannelsManually.............................11 SettingtheChannelLists................................12 ActivatingtheChildLock................................12 . SortingtheStoredChannels...........................13 AssigningChannelsNames............................13 FineTuningChannelReception.....................14 . uSing thE tElEtExt FEaturE Teletext Decoder.............................................32 Displaying the Teletext Information.................32 Selecting a Specific Teletext Page..................33 UsingFastexttoSelectaTeletextPage.........33 SEtting thE PiCturE ChangingthePictureStandard.......................14 AdjustingtheCustomPicture.........................15 . ChangingtheColourTone..............................15 ActivatingBacklight.........................................16 Configuring Detailed Settings on the Picture..17 ChangingthePictureSize..............................18 FreezingtheCurrentPicture...........................19 SelectingtheScreenMode.............................19 ResettingthePictureSettingstothe Factory Defaults..............................................19 Digital NR / Active Colour / DNIe....................20 ViewingthePictureInPicture(PIP)................21 HDMI Black Level...........................................22 SEtting thE Sound ChangingtheSoundStandard.......................22 . AdjustingtheSoundSettings..........................23 SettingtheTruSurroundXT(SRSTSXT)......23 ConnectingHeadphones................................24 SelectingtheSoundMode..............................24 AdjustingtheVolumeAutomatically................24 SelectingtheInternalMute.............................25 ListeningtotheSoundoftheSubPicture......25 . ResettingtheSoundSettingstotheFactory Defaults...........................................................26 SEtting thE PC SettingupYourPCSoftware (BasedonWindowsXP).................................34 Display Modes................................................34 SettingthePC.................................................35 Wall-MountAdjustment (LE40S8LE46S8)(Soldseparately)...............36 rECommEndationS For uSE UsingtheAnti-TheftKensingtonLock.............37 Troubleshooting:BeforeContacting ServicePersonnel...........................................37 Technical and Environmental Specifications ..38 Symbol Press Important Note One-Touch Button English - list of Parts Please make sure the following items are included with your LCD TV. Ifanyitemsaremissing,contactyourdealer. M4XL16 RemoteControl &Batteries (AAAx2) PowerCord Cover-Bottom StandScrew X4 SafetyGuide Stand CleaningCloth RegistrationCard Owner'sInstructions Warrantycard Warranty card / Safety Guide / Registration Cards (Not available in all locations) Thestandandstandscrewmaynotbeincludeddependingonthemodel. installing the Stand <> <3> .PlacetheTVfaceddownonasoftclothorcushiononatable. .PutthestandintotheholeatthebottomoftheTV. 3.Insertscrewintotheholeindicatedandtighten. Thestandisinstalledformodelswiththescreensizeof37inchandabove. installing the Wall mount Kit Wallmountitems(soldseparately)allowyoutomount theTVonthewall. Fordetailedinformationoninstallingthewallmount, seetheinstructionsprovidedwiththeWallMountitems. Contactatechnicianforassistancewheninstallingthe wallmountedbracket. SamsungElectronicsisnotresponsibleforanydamage totheproductorinjurytoyourselforothers ifyouelecttoinstalltheTVonyourown. Removethestandandcoverthebottomholewitha capandfastenwithtwoscrews. English - Viewing the Control Panel Theproductcolourandshapemayvarydependingonthemodel. 1 SourCE Togglesbetweenalltheavailableinput sources(TV,Ext.1,Ext.2,AV,S-Video, Component, PC, HDMI1, HDMI2). Intheon-screenmenu,usethisbuttonasyou usetheEntErbuttonontheremotecontrol. 4 Presstochangechannels. Intheon-screenmenu,usethe buttons as you use the and buttons on theremotecontrol. (WithouttheRemoteControl,youcanturnon theTVbyusingtheChannelbuttons.) Speakers (Power) PresstoturntheTVonandoff. Power indicator Blinksandturnsoffwhenthepowerisonand lightsupinstand-bymode. remote Control Sensor Aimtheremotecontroltowardsthisspoton theTV. 2 mEnu Presstoseeanon-screenmenuofyourTV's 5 features. 6 3 Presstodecreaseorincreasethevolume. Intheon-screenmenu,usethe buttons as you use the and buttons on theremotecontrol. English - 3 Viewing the Connection Panel 1 2 3 4 5 0 9 PowerInput 8 7 6 WheneveryouconnectanexternaldevicetoyourTV,makesurethatpowerontheunitisturnedoff. Whenconnectinganexternaldevice,matchthecolouroftheconnectionterminaltothecable. 1Connecting Set-top Box, VCr or dVd Connector EXT1 EXT2 Video O O Input Audio (L/R) O O RGB O Output Video + Audio (L/R) OnlyTV Outputyoucanchoose. -Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. English - 2 Connecting audio - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater. 3hdmi in , hdmi in - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players) - No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI? - "High Definition Multimedia interface" allows the transmission of high definition digital video dataandmultiplechannelsofdigitalaudio(5.1channels). - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channeldigitalaudio. dVi in (hdmi) / (audio r/l) - When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc,makesurethatithasbeensettoacompatiblevideooutputmodeasshowninthetable below.Failuretoobservethismayresultinpicturedistortion,imagebreakupornopicture. - When using an HDMI/DVI cable connection, it is only possible from the HDMI2 terminal. You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the "R- AUDIO - L" terminal on DVI for sound output. Supported modes for HDMI/DVI and Component 480i 480p 576i 576p 720p 1080i HDMI/DVI 50Hz X X X O O O HDMI/DVI 60Hz X O X X O O Component O O O O O O 4Connecting an aerial or Cable television network Toviewtelevisionchannelscorrectly,asignalmustbereceivedbythesetfromoneofthefollowing sources: - An outdoor aerial / A cable television network / A satellite network 6Connecting External a/V devices - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre sponding audio out connectors on the A/V device. -Headphonemaybeconnectedtotheheadphoneoutput(5)ontherearofyourset.Whilethe headphoneisconnected,thesoundfromthebuilt-inspeakerswillbedisabled. 7 Connecting Computer - Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to theVideoCardofyourcomputer. - Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other endto"AudioOut"ofthesoundcardonyourcomputer. English - 8 SErViCE -Serviceconnectionforqualifiedserviceengineer. 9 Connecting Component devices (dtV/dVd) -Connectcomponentvideocables(optional)tocomponentconnector("PR","PB","Y")ontherearof your set and the other ends to corresponding component video out connectors on the DTV or DVD. - If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR","PB","Y") onyourset. -ThePR,PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-YandR-YorY,CbandCr. - Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. - This LCD TV displays its optimum picture resolution in 720p mode. - This LCD TV displays its maximum picture resolution in 1080i mode. 0Kensington lock -TheKensingtonlock(optional)isadeviceusedtophysicallyfixthesystemwhenusedinapublic place. -Ifyouwanttousealockingdevice,contactthedealerwhereyoupurchasedtheTV. -TheplaceoftheKensingtonLockmaybedifferentdependingonitsmodel. English - Viewing the remote Control 1 elevisionStandbybutton T N 2 umberbuttonsfordirect channelaccess C a ontrolthecursorinthemenu bUsetoseeinformationonthe currentbroadcast 3 ne/Two-digit channel selection O S 4 electstheTVmodedirectly c Picturefreeze P e icturesizeselection 5 sedtodisplayChannelListson U thescreen. f PIP:Picture-In-Picture On / Off SOURCE:Inputsourceselection POSITION:PIPpositionselection P :Nextchannel P :Previouschannel 6 Volumeincrease Volumedecrease 7 Temporarysoundswitch-off 8Menudisplayand changeconfirmation S 9 oundmodeselection teletext Functions 4Exitfromtheteletextdisplay 8Teletextindex %Teletext mode selection (LIST/FLOF) ^ eletextsubpage T (P :Teletextnextpage P :Teletextpreviouspage 0 Returnstothepreviousmenu. P ! ictureeffectselection @Adjustsscreenbrightnessto saveenergy. #Soundeffectselection $SRSTSXTselection %Availablesourceselection ^Previouschannel Selects the HDMI mode directly. & )Teletextcancel bTeletextreveal dAlternately select Teletext, Double, or Mix. 9!ce Fastexttopicselection *AutomaticPower-off (P :Nextchannel P :Previouschannel f PIP:TeletextHold fSOURCE:TeletextStore fPOSITION:Teletextsizeselection )Exit the OSD Thisisaspecialremotecontrolforthevisuallyimpaired, andhasBraillepointsonthePower,ChannelandVolumebuttons. English - installing Batteries in the remote Control . Liftthecoveratthebackoftheremotecontrolupwardasshowninthe figure. . InstalltwoAAAsizebatteries. Makesuretomatchthe"+"and"­"endsofthebatterieswiththe diagraminsidethecompartment. 3. Replacethecover. Removethebatteriesandstoretheminacool,dryplaceifyouwon'tbe usingtheremotecontrolforalongtime.Theremotecontrolcanbeused uptoabout23feetfromtheTV. (AssumingtypicalTVusage,thebatterieslastforaboutoneyear.) Iftheremotecontroldoesn'twork,checkthefollowing: . Is the TV power on? . Are the plus and minus ends of the batteries reversed? 3. Are the batteries drained? . Is there a power outage, or is the power cord unplugged? . Is there a special fluorescent light or neon sign nearby? Switching on and off the mains lead is attached to the rear of your set. . Plugthemainsleadintoanappropriatesocket. Thestandbyindicatorlightsuponthefrontoftheset. . Pressthe buttononthefrontoftheset. YoualsocanpressthePoWEr buttonorthetVbuttonontheremotecontroltoturn theTVon. Theprogrammethatyouwerewatchinglastisreselectedautomatically. 3. Press the numeric button (0~9) or channel up/down ( / )buttonontheremotecontrolor buttonontherightsideoftheset. Whenyouswitchthesetonfortheveryfirsttime,youwillbeaskedtochooselanguagein whichthemenusaretobedisplayed. . Toswitchyoursetoff,pressthePoWEr buttonagain. Placing Your television in Standby mode Your set can be placed in standby mode in order to reduce the power consumption. the standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). . PressthePoWEr buttonontheremotecontrol. Thescreenisturnedoffandaredstandbyindicatorappearsonthefrontofyourset. . Toswitchyoursetbackon,simplypressthePoWEr ,numericbuttons(0~9),tVbuttonor channel up/down ( / )buttonagain. Do not leave your set in standby mode for long periods of time (when you are away on holiday, forexample). Itisbesttounplugthesetfromthemainsandaerial. English - Plug & Play When the tV is initially powered on, several basic settings proceed automatically and subsequently. the following settings are available. . Pressthe PoWEr buttonontheremotecontrol. Themessage"StartPlug&Play"isdisplayedwith"OK" selected. . 3. Select the appropriate language by pressing the or buttons. PresstheEntErbuttontoconfirmyourchoice. Plug & Play Start Plug & Play. oK Enter Exit Press the or buttons to select "Shop" or "Home", then theEntErbutton. WerecommendsettingtheTVtoHomemodeforthebest pictureinyourhomeenvironment. Shopmodeisonlyintendedforuseinretailenvironments. If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, presstheVolumebuttonandthenholddownthemEnubuttonforfivesecondsontheside paneloftheTV. . Themessage"Checkantennainput."isdisplayedwith"OK"selected. PresstheEntErbutton. Pleasecheckthattheantennacableisconnectedcorrectly. . Select the appropriate country by pressing the or button. PresstheEntErbuttontoconfirmyourchoice. . The"AutoStore"menuisdisplayedwiththe"Start"selected.PresstheEntErbutton. Thechannelsearchwillstartandendautomatically. Afteralltheavailablechannelsarestored,the"ClockSet"menuappears. PresstheEntErbuttonatanytimetointerruptthememorizationprocess. . PresstheEntErbutton. Select the "Month", Year", "Day", Hour" or "Minute" by pressing the orbuttons. Set the "Month", Year", "Day", Hour" or "Minute" by pressing the orbuttons. Youcanalsosetthehourandminutebypressingthenumberbuttonsontheremotecontrol. . PresstheEntErbuttontoconfirmyoursetting. language:Selectyourlanguage. Country:Selectyourcountry. auto Store:Automaticallyscansforandstoreschannelsavailableinthelocalarea. Clock Set:SetsthecurrenttimefortheTVclock. English - 9 if you want to reset this feature... . PressthemEnubuttontodisplaythemenu. Presstheorbuttontoselect"Setup",thenpressthe EntErbutton. . PresstheEntErbuttonagain,toselect"Plug&Play". 3. Themessageto"StartPlug&Play"isdisplayed. tV Plug & Play language time game mode Blue Screen melody PC smore move Setup : English : off : off : off return Enter Plug & Play Start Plug & Play. oK Enter tV return -StoringChannelsAutomatically -StoringChannelsManually Channel Country : Belgium auto Store manual Store Channel manager Sort name Fine tune move Enter return Storing Channels automatically You can scan for the frequency ranges available to you (and availability depends on your country). automatically allocated programme numbers may not correspond to actual or desired programme numbers. however, you can sort numbers manually and clear any channels you do not wish to watch. . PressthemEnubuttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpresstheEntErbutton. . PresstheEntEr button to select "Country". 3. Selecttheappropriatecountrybypressingtheorbutton. PresstheEntErbuttontoconfirmyourchoice. . Presstheor button to select "Auto Store", then press the EntErbutton. . PresstheEntErbutton. TheTVwillbeginmemorizingalloftheavailablechannels. PresstheEntErbuttonatanytimetointerruptthememorizationprocessandreturntothe "Channel"menu. . Afteralltheavailablechannelsarestored,the"Sort"menuappears. English - 0 Storing Channels manually You can store up to 00 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. the programme number of each stored channel which you wish to identify. . PressthemEnubuttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpresstheEntErbutton. . Presstheorbuttontoselect"ManualStore",thenpresstheEntErbutton. 3. PresstheEntErbuttontoselect"Programme". . Toassignaprogrammenumbertoachannel,findthecorrectnumberbypressingtheor buttonandthenpresstheEntErbutton. Youcanalsosetaprogrammenumberbypressingnumberbuttonsontheremotecontrol. . Presstheorbuttontoselect"ColourSystem",thenpresstheEntErbutton. . Selectthecolourstandardrequiredbypressingtheorbuttonthen,presstheEntErbutton. . Presstheorbuttontoselect"SoundSystem",thenpresstheEntEr button. . Selectthesoundstandardrequiredbypressingtheorbutton,thenpresstheEntErbutton. Ifthereisanabnormalsoundornosound,re-selectthesoundsystemrequired. 9. Ifyouknowthenumberofthechanneltobestored,presstheorbuttontoselect"Channel". PresstheEntErbutton.SelectC(Airchannel)orS(Cablechannel)bypressingtheor button.Pressthebuttontoselectchannel. SelecttherequirednumberbypressingtheorbuttonandthenpresstheEntErbutton. Channelmode:P(Programmemode),C(Airchannelmode),S(Cablechannelmode) Youcanalsosetachannelnumberbypressingnumberbuttonsontheremotecontrol. 0. Ifyoudonotknowthechannelnumbers,presstheorbuttontoselect"Search". PresstheEntErbutton.SearchbypressingtheorbuttonandthenpresstheEntErbutton. . Presstheorbuttontoselect"Store".PresstheEntErbuttontoselect"OK". . Repeatsteps3toforeachchanneltobestored. Programme:Selectsaprogramnumberforthechannel. Colour System:Setsthecoloursupportingsystem. Sound System:Setsthesoundsupportingsystem. Channel:Selectsachannel. Search:Scansforthefrequencyvalueforthechannel. Store:Savesyoursettings. English - Setting the Channel lists Set the channels according to your preference. You can easily delete, add, or lock the channel you want. . PressthemEnubuttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpressthe EntErbutton. . Presstheorbuttontoselect"ChannelManager", thenpresstheEntErbutton. 3. PresstheEntErbuttonagain,toselect"ChannelList". . Pressthebuttontoselect" "line. . Presstheorbuttontoselecttheundesiredchannel, thenpresstheEntErbuttontocancel. . Repeatsteps5foreachchanneltobeselectedorcanceled . PresstheExitbuttontoexit. " YoucanselecttheseoptionsbysimplypressingtheCh liSt buttonontheremotecontrol. "isactivewhen"ChildLock"isselectedto"On". Channel list P C3 / 0 Prog. 0 C-C3 BBC 3 C C C S3 S S 9 S add move Page lock Enter return activating the Child lock this feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child lock cannot be released using the buttons on the side. only the remote control can release the Child lock setting, so keep the remote control away from children. . PressthemEnubuttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpressthe EntErbutton. . Presstheorbuttontoselect"ChannelManager", thenpresstheEntErbutton. 3. Presstheorbuttontoselect"ChildLock",thenpress theEntErbutton. . Presstheorbuttontoselect"On"or"Off".Pressthe EntEr button. . Presstheorbuttontoselect"ChannelList", thenpresstheEntErbutton. . Pressthebuttontoselect" "line. . Presstheorbuttontoselectthechannelsyouwantto lock,thenpresstheEntErbutton. . Repeatstepsforeachchanneltobelockedorunlocked. 9. PresstheExitbuttontoexit. Select"On"or"Off"in"ChildLock"toeasilyturnthechannels whichselectedon" "tobeactiveorinactive. English - P C Prog. 0 C-C3 BBC tV Channel manager Channel list Child lock : off on move Enter return Channel list BBC / 0 3 C C C S3 S S 9 S add move Page lock Enter return Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Modifythenumericorderinwhichthechannelshave beenautomaticallystored. Giveeasilyrememberednumberstothechannels thatyouwatchmostoften. tV Channel Country : Belgium auto Store manual Store Channel manager Sort name Fine tune . PressthemEnubuttontodisplaythemenu.Presstheor buttontoselect"Channel",thenpresstheEntErbutton. . Presstheorbuttontoselect"Sort",thenpressthe EntEr button. 3. Selectthechannelnumberthatyouwishtochangebypress ingtheorbuttonrepeatedly.PresstheEntErbutton. Theselectedchannelnumberandnamearemovedto rightside. . . Presstheorbuttontomovetothepositioninwhichyou wouldliketochangeandthenpresstheEntErbutton. Theselectedchannelisexchangedwiththeone previouslystoredtothechosennumber. Repeatsteps3toforanotherchanneltobesorted. tV move Enter return Sort Prog. 0 3 move Ch. C-C3 C C3 S r r name Enter return . PresstheExitbuttontoexit. assigning Channels names Channel names will be assigned automatically when channel information is broadcast. these names can be changed, allowing you to assign new names. . PressthemEnubuttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpressthe EntErbutton. . Presstheorbuttontoselect"Name",thenpressthe EntErbutton. 3. Ifnecessary,selectthechanneltobeassignedtoanew namebypressingtheorbutton.PresstheEntEr button. Theselectionbarisdisplayedaroundthenamebox. . to... Selectaletter,numberorsymbol Moveonthenextletter Movebackthepreviousletter Confirmthename then... Presstheorbutton Pressthebutton Pressthebutton PresstheEntErbutton tV Channel Country : Belgium auto Store manual Store Channel manager Sort name Fine tune move Enter return tV Prog. 0 3 move name Ch. C-C3 C C3 S r r name --------------------Enter return Thecharactersavailableare:Lettersofthealphabet (A~Z) / Numbers (0~9) / Special characters ( -, space) . Repeatsteps3toforeachchanneltobeassignedtoanew name. . PresstheExitbuttontoexit. English - 3 Fine tuning Channel reception use fine tuning to manually adjust a particular channel for optimal reception. . Usethenumberbuttonstodirectlyselectthechannelthat youwanttofinetune. . PressthemEnubuttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpressthe EntErbutton. 3. Presstheorbuttontoselect"FineTune",thenpress theEntErbutton. . Presstheorbuttontoadjustthefinetuning. PresstheEntErbutton. . PresstheExitbuttontoexit. Finetunedchannelsthathavebeensavedaremarkedwith anasterisk"*"ontheright-handsideofthechannelnumber inthechannelbanner.Andthechannelnumberturnsred. Toresetthefine-tuning,select"Reset"bypressingthe orbuttonandthenpresstheEntErbutton. adjust P 0 reset Save return tV Channel Country : Belgium auto Store manual Store Channel manager Sort name Fine tune move Enter return Fine tune Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. . PressthemEnubuttontodisplaythemenu. PresstheEntErbuttontoselect"Picture". . PresstheEntErbuttonagain,toselect"Mode". 3. Presstheorbuttontoselectthedesiredpictureeffect. PresstheEntErbutton. . PresstheExitbuttontoexit. dynamic:Selectsthepictureforhigh-definitioninabright room. Standard:Selectsthepictureforoptimumdisplayina normalenvironment. movie:Selectsthepictureforcomfortabledisplayina darkroom. ThePicturemodemustbeadjustedseparatelyforeachinput source. Youcanreturntothefactorydefaultspicturesettingsby selectingthe"Reset". (Referto"ResettingthePictureSettingstotheFactory Defaults" on page 19) tV tV Picture mode : dynamic Contrast 00 Brightness 0 Sharpness Colour tint g0 r0 Colour tone : Cool Backlight :0 smore move Enter return mode Standard 00 Contrast movie 0 Brightness Sharpness Colour tint g0 r0 Colour tone : Cool Backlight :0 smore move Enter return Picture : dynamic dynamic Youcanalsopressthe P.modE buttonontheremote controltoselectoneofthe picturesettings. English - adjusting the Custom Picture Your set has several settings which allow you to control picture quality. . Toselectthedesiredpictureeffect,followthe "ChangingthePictureStandard"instructionsnumber1to3. (onpage14) . Presstheorbuttontoselectaparticularitem.Pressthe EntErbutton. 3. Presstheorbuttontodecreaseorincreasethevalueof aparticularitem.PresstheEntErbutton. . PresstheExitbuttontoexit. Contrast:Adjuststhelightnessanddarknessbetweenobjectsandthebackground. Brightness:Adjuststhebrightnessofthewholescreen. Sharpness:Adjuststheoutlineofobjectstoeithersharpenthemormakethemmoredull. Colour: Adjuststhecolours,makingthemlighterordarker. tint(ntSC only):Adjuststhecolourofobjects,makingthemmoreredorgreenforamorenaturallook. TheadjustedvaluesarestoredaccordingtotheselectedPicturemode. InPCMode,Only"Contrast"and"Brightness"canbeadjusted. "Tint" function is available only in "HDMI" and "Component" mode. tV Picture mode : dynamic Contrast 00 Brightness 0 Sharpness Colour tint g0 r0 Colour tone : Cool Backlight :0 smore move Enter return Changing the Colour tone You can select the most comfortable colour tone to your eyes. . Toselectthedesiredpictureeffect,followthe "ChangingthePictureStandard"instructionsnumber1to3. (onpage14) . Presstheorbuttontoselect"ColourTone",thenpress theEntErbutton. 3. Presstheorbuttontoselectthedesiredcolourtone setting.PresstheEntEr button. . PresstheExitbuttontoexit. Cool: Makesthecolourtemperaturebluerthan"Cool1" menu. Cool: Makeswhitesbluish. normal: Keepswhiteswhite. Warm: Makeswhitesreddish. Warm: Makesthecolourtemperatureredderthan "Warm1"menu. tV tV Picture mode : dynamic Contrast 00 Brightness 0 Sharpness Colour tint g0 r0 Colour tone : Cool Backlight :0 smore move Enter return mode Contrast 00 Brightness 0 Cool Sharpness Cool Colour normal tint g0 Warm r0 Colour tone : Cool Warm Backlight :0 smore move Enter return Picture : dynamic Theadjustedvaluesarestoredaccordingtotheselected Picturemode. When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected. English - activating Backlight. You can adjust the screen brightness by adjusting the lCd backlight brightness. (0~0) 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3.(Onpage14) 2. Press the or button to select "Backlight", then press the EntErbutton. 3. Press the or button to decrease or increase the value of aparticularitem. PresstheEntErbutton. 4. PresstheExitbuttontoexit. tV Picture mode : dynamic Contrast 00 Brightness 0 Sharpness Colour tint g0 r0 Colour tone : Cool Backlight :0 smore move Enter return Backlight adjust return English - Configuring Detailed Settings on the Picture You can set detailed picture settings. . . 3. . . . PressthemEnubuttontodisplaythemenu. PresstheEntEr button, to select "Picture". Press the or button to select "Detail Settings", thenpresstheEntErbutton. Select the required option by pressing the or button, thenpresstheEntErbutton. Availableoptions:Black Adjust, Dynamic Contrast, Gamma,ColorSpace,WhiteBalance,MyColourControl, EdgeEnhancement Whenyouaresatisfiedwithyoursetting,presstheEntEr button. PresstheExitbuttontoexit. WhenthepicturemodeissettoMovieorStandard, DetailedSettingscanbeselected. If DNIe is Off, the Detailed Settings cannot be selected whenthePicturemodeisinStandardmode. tV Picture rmore detailed Settings Size : auto Wide Screen mode : : 9 digital nr : off active Colour : off dnle : off reset : ok move Enter return tV detailed Settings Black adjust : off dynamic Contrast : off gamma Color Space : auto White Balance my Colour Control Edge Enhancement : off move Enter return Black adjust: off/low/medium/high Youcandirectlyselecttheblacklevelonthescreentoadjust thescreendepth. dynamic Contrast: off/low/medium/high Youcanadjustthescreencontrastsothattheoptimalcontrastisprovided. gamma : -3 ~ 3 Youcanadjustthemiddlebrightnessofpictures. Press the or button until you reach the optimal setting. Color Space: auto/Wide YoucansetthecolorreproductionspacefortheinputsignaltoAutoorWide. White Balance: r offset/g offset/B offset/r gain/g gain/B gain/reset Youcanadjustthecolortemperatureformorenaturalpicturecolors. R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the adjustedscreen. Select the required option by pressing the or button, then press the EntErbutton. Press the or button until you reach the optimal setting. Reset:Thepreviouslyadjustedwhitebalancewillberesettothefactorydefaults. my colour Control: Pink/green/Blue/White/reset Thissettingcanbeadjustedtosuityourpersonalpreferences. Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the EntErbutton. Press the or button until you reach the optimal setting. Reset:Thepreviouslyadjustedcolourswillberesettothefactorydefaults. Edge Enhancement: off/on Youcanemphasizeobjectboundaries. English - Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. . PressthemEnubuttontodisplaythemenu. PresstheEntErbutton,toselect"Picture" . Presstheorbuttontoselect"Size",thenpressthe EntErbutton. 3. Selecttherequiredoptionbypressingtheorbutton. PresstheEntErbutton. . PresstheExitbuttontoexit. auto Wide:Automaticallyadjuststhepicturesizetothe"16:9" aspectratio. :9: Adjusts the picture size to 16:9 appropriate for DVDs or widebroadcasting. Wide Zoom: Magnifythesizeofthepicturemorethan4:3. Zoom:Magnifiesthe16:9widepicture(intheverticaldirection) tofitthescreensize. :3:Thisisthedefaultsettingforavideomovieornormalbroadcasting. Just Scan :Displays the input scenes as they are without any cutoff when HDMI 720p,1080i signals are input. "AutoWide"functionisavailableonlyin"TV","Ext1","Ext2", "AV",and"S-Video"mode. InPCMode,only"16:9"or"4:3"modecanbeadjusted. Zoom:Select bypressingtheorbuttons. Usetheorbuttontomovethepictureupand down.Afterselecting ,usetheorbuttonto magnifyorreducethepicturesizeinthevertical direction. Wide Zoom : Move the screen up/down using theor buttonsafterselectingthe bypressingthe orEntErbutton. tV auto Wide :9 Wide Zoom Zoom :3 Just Scan tV Picture rmore detailed Settings Size : auto Wide Screen mode : : 9 digital nr : off active Colour : off dnle : off reset : ok move Enter return Size move Enter return Youcanselecttheseoptions bysimplypressingtheP.SiZE buttonontheremotecontrol. English - Freezing the Current Picture Press the STILL button to freeze a moving picture into a still one. Press again to cancel. Selecting the Screen Mode When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 1. PresstheMENUbuttontodisplaythemenu. PresstheENTERbutton,toselect"Picture". 2. Presstheorbuttontoselect"ScreenMode",thenpress theENTERbutton. 3. Selecttherequiredoptionbypressingtheorbutton. PresstheENTERbutton. Availableoptions:16:9,WideZoom,Zoom,4:3 16:9:Setsthepictureto16:9widemode. WideZoom:Magnifythesizeofthepicturemorethan4:3. Zoom:Magnifythesizeofthepictureverticallyonscreen. 4:3:Setsthepictureto4:3normalmode. PictureSizeisavailableinAutoWidemode. TV TV Picture rMore Detailed Settings Size : Auto Wide Screen Mode : 16 : 9 Digital NR : Off Active Colour : Off DNle : Off Reset : Ok Move Enter Return Picture rMore Detailed Settings Size : Auto Wide Screen Mode : 16 : 9 16:9 Wide Zoom Digital NR : On Active Colour : Off Zoom DNle : Off 4:3 Reset : Ok Move Enter Return 4. PresstheEXITbuttontoexit. ThisfunctionisnotavailableinPCorComponent,HDMImode. Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1. Toselectthedesiredpictureeffect,followthe "ChangingthePictureStandard"instructionsnumber1to3 onpage14. 2. Presstheorbuttontoselect"Reset",thenpressthe ENTERbutton. 3. Presstheorbuttontoselect"OK"or"Cancel". PresstheENTERbutton. 4. PresstheEXITbuttontoexit. The"Reset"willbesetforeachpicturemode. TV TV Picture rMore Detailed Settings Size : Auto Wide Screen Mode : 16 : 9 Digital NR : Off Active Colour : Off DNle : Off Reset : Ok Move Enter Return Picture rMore Detailed Settings Size : Auto Wide Screen Mode : 16 : 9 Digital NR : Off Active Colour : Off DNle : Off Reset : OK Cancel OK Move Enter Return English - 19 digital nr / active Colour / dnie if the broadcast signal received by your tV is weak, you can activate the digital noise reduction feature to help reduce any static and ghosting that may appear on the screen. . PressthemEnubuttontodisplaythemenu. PresstheEntEr button to select "Picture". . Select the required option by pressing the or button, thenpresstheEntErbutton. Available options: Digital NR, Active Colour, DNIe. tV Picture rmore detailed Settings Size : auto Wide Screen mode : : 9 digital nr : off active Colour : off dnle : off reset : ok move Enter return 3. Whenyouaresatisfiedwithyoursetting,pressthe EntErbutton. . PresstheExitbuttontoexit. digital nr: off/low/medium/high/auto Ifthesignalreceivedbythetelevisionisweak,youcanactivatethisfeaturetoreduceanystaticand ghostingthatmayappearonthescreen. ThisfunctionisnotavailableinPCmode. active Colour: off/on Ifyouturnonthisoption,thecolorsoftheskyandgrasswillbestrongerandclearerforamore vividon-screenpicture. ThisfunctionisnotavailableinPCmode. ThisfunctionisnotavailableinMoviemode. dnie : off/demo/on This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, youcanviewthedifferenceinthevisualquality. DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrastenhancementandwhiteenhancement.NewimagecompensationAlgorithmgives brighter, clearer, more detailed image to you. DNIeTMtechnologywillfiteverysignalintoyour eyes. ThisfunctionisnotavailableinPCmode. ThisfunctionisnotavailableinMoviemode. English - 0 Viewing the Picture in Picture (PiP) You can display a sub picture within the main picture of set programme or video input. in this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. . PressthemEnubuttontodisplaythemenu. Press the or button to select "Setup", then press the EntErbutton. . Presstheorbuttontoselect"PIP",thenpressthe EntErbutton. 3. . . PresstheEntErbuttonagain. Presstheorbuttontoselect"On",thenpressEntEr button. IfthePIPisactivated,thesizeofthemainpictureturns to"16:9". Presstheorbuttontoselect"Source",thenpress EntErbutton.Selectasourceofthesubpicturebypressing theorbuttonandpresstheEntErbutton. Thesubpicturecanservedifferentsourceselections basedonwhatthemainpictureissetto. Presstheorbuttontoselect"Size"ofthesubpicture andthenpresstheEntErbutton. Selectasizeofthesubpicturebypressingtheor buttonandthenpresstheEntErbutton. Ifmainpictureisin"Component"and"PC"mode, "Size"isnotavailable. tV tV mode : Custom Setup Equalizer rmore SrS tSxt : off home theater PC : off auto Volume : off Energy Saving : off internal mute : off hdmi Black level : normal reset PiP move move Enter Enter return return mode Equalizer PiP SrS tSxt Source auto Volume Size internal mute Position reset Programme : Custom PiP on :: off tV :: off : :: off :P move move Enter Enter return return PressthePiPbuttononthe remotecontrolrepeatedlytoactivate ordeactivatethe"PIP". . Presstheorbuttontoselect"Position",thenpressthe EntErbutton.Selectthepositionofthesubpictureby pressingtheorbuttonandthenpresstheEntErbutton. . Presstheorbuttontoselect"Programme"andthenpresstheEntErbutton. Youcanselectthechannelthatyouwanttoviewthroughsubpicturebypressingtheor button.PresstheEntErbutton. The"Programme"canbeactivewhenthesubpictureissettoTV. . PresstheExitbuttontoexit. YoumaynoticethatthepictureinthePIPwindowbecomesslightlyunnaturalwhenyouusethe mainscreentoviewagameorkaraoke. Source:Usedtoselectasourceofthesubpicture. Size:Usedtoselectasizeofthesubpicture. Position:Usedtomovethesubpicture. Programme:UsedtoChangethesubpicture. PiP Settings o:PIPoperates,x:PIPdoesn'toperate Main Sub Component HDMI PC TVanalog O O O Ext.1 O O O Ext.2 O O O AV O O O S-Video Component X X X X X X HDMI X X X PC X X X TVdigital X X X English - HDMI Black Level You can directly select the black level on the screen to adjust the screen depth. 1. PresstheMENUbuttontodisplaythemenu. Presstheorbuttontoselect"Setup",thenpressthe ENTERbutton. 2. Presstheorbuttontoselect"HDMIBlackLevel",then presstheENTERbutton. 3. Presstheorbuttontoselect"Normal"or"Low",then presstheENTERbutton. 4. PresstheEXITbuttontoexit. ThisFunctionisactiveonlywhentheexternelinputconnects HDMI(RGBsiginal). Normal: Thescreengetsbrighter. Low: Thescreengetsdarker. TV TV Mode : Custom Setup Equalizer More SRS TSXT : Off Home Theater PC : Off Auto Volume : Off Energy Mute : Off Internal Saving : Off HDMI Black Level : Low Reset PIP Move Enter Return Mode : Custom Setup Equalizer More SRS TSXT : Off Home Theater PC : Off Auto Volume : Off Energy Mute : Off Internal Saving : Off Normal HDMI Reset Black Level : Low Low PIP Off Move Move Enter Enter Return Return Changing the Sound Standard You can select the type of the special sound effect to be used when watching a given broadcast. 1. PresstheMENUbuttontodisplaythemenu. Presstheorbuttontoselect"Sound",thenpressthe ENTERbutton. 2. PresstheENTERbuttonagain,toselect"Mode". 3. Selecttherequiredsoundeffectbypressingtheor buttonrepeatedlyandthenpresstheENTERbutton. 4. PresstheEXITbuttontoexit. Standard:Selectsthenormalsoundmode. Music:Emphasizesmusicovervoices. Movie:Providesliveandfullsoundformovies. Speech:Emphasizesvoicesoverothersounds. Custom:Selectsyourcustomsoundsettings. (Referto"AdjustingtheSoundSettings") TV Mode Equalizer SRS TS XT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off : Off : Main Enter Return TV Mode Equalizer SRS TS XT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom Standard : Off Movie : Off Speech : Off Custom : Main Music Enter Return English - 22 adjusting the Sound Settings the sound settings can be adjusted to suit your personal preferences. . PressthemEnubuttontodisplaythemenu. Press the or button to select "Sound", then press the EntErbutton. . 3. . Press the or button to select "Equalizer", then press the EntErbutton. Press the or button to select a particular item. PresstheEntErbutton. Press the or button to reach the required setting. PresstheEntErbutton. Ifyoumakeanychangestothesesettings,theSoundMode isautomaticallyswitchedto"Custom". tV tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off : off : off : main Enter return Equalizer . PresstheExitbuttontoexit. Balance 00hz 300hz khz 3khz 0khz move adjust return Setting the truSurround xt (SrS tS xt) truSurround xt is a patented SrS technology that solves the problem of playing . multichannel content over two speakers. truSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers. it is fully compatible with all multichannel formats. . PressthemEnubuttontodisplaythemenu. Presstheorbuttontoselect"Sound",thenpressthe EntErbutton. . 3. Press the or button to select "SRS TS XT", then press theEntErbutton. Press the or button to select "On" or "Off". Press the EntErbutton. tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off : off : off : main Enter return tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off off : off on : off : main . PresstheExitbuttontoexit. TruSurroundXT,SRSand symbolare trademarksofSRSLabs,Inc.TruSurroundXT technologyisincorporatedunderlicensefrom SRSLabs,Inc. Enter return Youcanalsosettheseoptions simplybypressingtheSrS buttononremotecontrol. English - 3 Connecting headphones You can connect a set of headphones to your set if you wish to watch a tV programme without disturbing the other people in the room. Whenyouinserttheheadsetjackintothecorrespondingport,you can operate only "SRS TS XT" and "Auto Volume" in Sound menu. Prolongeduseofheadphonesatahighvolumemaydamage yourhearing. Youwillnotreceivesoundfromthespeakerswhenyouconnectheadphonestothesystem. TheheadphonevolumeandTVvolumeareadjusteddifferently. Selecting the Sound mode You can set the sound mode by pressing the "dual" button. When you press it, the current sound mode is displayed on the screen. AudioType FM Stereo Mono Stereo Dual Mono NICAM Stereo Stereo Dual DUAL 1/2 MONO STEREO MONO DUAL 1 DUAL 2 MONO MONO STEREO MONO DUAL 1 DUAL 2 Default Automatic change DUAL 1 Automatic change DUAL 1 Youcanalsosettheseoptions simplybypressingtheDUAL buttononremotecontrol. Ifthestereosignalisweakandanautomaticswitchingoccurs,thenswitchtotheMono. adjusting the Volume automatically Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. this feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. . PressthemEnubuttontodisplaythemenu. Press the or button to select "Sound", then press the EntErbutton. . 3. Press the or button to select "Auto Volume", then press theEntErbutton. Press the or button to select "On" or "Off". Press the EntErbutton. tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off : off : off : main Enter return tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off : off off : off on : main . PresstheExitbuttontoexit. Enter return English - Selecting the internal mute if you want to hear the sound through separate speakers, cancel the internal amplifier. . PressthemEnubuttontodisplaythemenu. Press the or button to select "Sound", then press the EntErbutton. . 3. Press the or button to select "Internal Mute", then press theEntErbutton. Press the or button to select "On" or "Off". Press the EntErbutton. When"InternalMute"issetto"On',theSoundmenusexcept for"SoundSelect"(inPIPmode)cannotbeadjusted. tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset Sound : Custom : off : off : off : main move Enter return Sound : Custom : off : off : off off : main on . PresstheExitbuttontoexit. Enter return listening to the Sound of the Sub Picture during the PiP features activation, you can listen to the sound of the sub picture. . PressthemEnubuttontodisplaythemenu. Press the or button to select "Sound", then press the EntErbutton. . 3. Press the or button to select "Sound Select", then press theEntErbutton. Press the or button to select "Sub". PresstheEntErbutton. tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off : off : off : main Enter return Sound : Custom : off : off : off : main main Sub . PresstheExitbuttontoexit. main :Usedtolistentothesoundofthemainpicture. Sub :Usedtolistentothesoundofthesubpicture. You can select this option when the "PIP" is set to "On". (onpage21) Enter return English - resetting the Sound Settings to the Factory defaults if game mode is on, the reset Sound function is activated. Selecting the reset function after setting the equalizer resets the equalizer setting to the factory defaults. . PressthemEnubuttontodisplaythemenu. Press the or buttontoselect"Sound",thenpressthe EntErbutton. . Press the or button to select "Reset", then press the EntErbutton. Youcanselectthisoptionwhenthe"GameMode"issetto"On". tV mode Equalizer SrS tS xt auto Volume internal mute Sound Select reset move Sound : Custom : off : off : off : main Enter return 3. PresstheExitbuttontoexit. Setting and displaying the Current time You can set the tV's clock so that the current time is displayed when you press the inFo button. You must also set the time if you wish to use the automatic on/off timers. . PressthemEnubuttontodisplaythemenu. Press the or button to select "Setup", then press the EntErbutton. . . Press the or button to select "Time", then press the EntErbutton. tV month p 0 q hour 00 tV Plug & Play language time game mode Blue Screen melody PC smore move Setup : English : off : off : off return Enter 3. PresstheEntErbuttontoselect"ClockSet". to... Move to Month, Day, Year, Hou or Minute Set the Month, Day, Year, Hou or Minute Clock Set day 0 minute 00 Year 00 Press the... orbutton. or button. PresstheEntErbutton. . PresstheExitbuttontoexit. move adjust return Ifyoudisconnectthepowercord,youhavetosettheclock again. You can also set Year, Month, Date, Hour and Minute by pressing the number buttons on the remotecontrol. English - Setting the Sleep timer You can select a time period of between 30 and 0 minutes after which the television automatically switches to standby mode. . PressthemEnubuttontodisplaythemenu. Press the or button to select "Setup", then press the EntErbutton. . 3. . Press the or button to select "Time", then press the EntErbutton. Press the or button to select "Sleep Timer", then press theEntErbutton. Press the or button repeatedly until the desired time appears(Off,30,60,90,120,150,180). PresstheEntEr button. TheTVautomaticallyswitchestostandbymodewhenthe timerreaches0. tV Plug & Play language time game mode Blue Screen melody PC smore move Setup : English : off : off : off return Enter tV Clock Set Sleep timer timer timer timer 3 time : 00 : 00 : off : 30 0 : 90 : 0 0 0 Enter return