User manual SAMSUNG LE52M86BD

LCD TV Contact SAMSUNG WORLD-WIDE IfyouhaveanyquestionsorcommentsrelatingtoSamsungproducts, pleasecontacttheSAMSUNGcustomercarecentre. Country REPUBLICOFIRELAND U.K Customer Care Centre 0818717100 0870SAMSUNG(7267864) Web Site www.samsung.com/uk www.samsung.com/uk LE37 8 M LE40M8 LE40N8 LE46M8 LE46N8 LE52M8 Owner's Instructions Beforeoperatingtheunit, pleasereadthismanualthoroughly, andretainitforfuturereference. ON-SCREEN MENUS PC DISPLAY PICTURE IN PICTURE (PIP) TELETEXT BN68-01186A-01 Registeryourproductatwww.samsung.com/global/register RecordyourModelandSerialnumberhereforfuturereference. Model _______________ Serial No. _______________ Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Setop Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture. IMPORTANT: Image retention issues are not covered by your Samsung® warranty. · Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. · Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. · Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the `brightness' and `contrast' when displaying still images. © 2007 Samsung Electronics Co., Ltd. All rights reserved. Contents CONNeCTING AND PRePARING YOuR TV List of Parts ........................................................ 3 Installing the Wall Mount Kit ............................... 3 Viewing the Control Panel .................................. 4 Viewing the Connection Panel ........................... 5 Viewing the Remote Control............................... 7 Installing Batteries in the Remote Control .......... 8 Switching On and Off ......................................... 8 Placing Your Television in Standby Mode........... 8 Plug & Play ......................................................... 9 SeTTING The SOuND Changing the Sound Standard ......................... 22 Adjusting the Sound Settings ........................... 23 Setting the TruSurround XT (SRS TS XT)........ 23 Connecting Headphones .................................. 24 Selecting the Sound Mode ............................... 24 Adjusting the Volume Automatically ................. 24 Selecting the Internal Mute .............................. 25 Listening to the Sound of the Sub Picture ........ 25 Resetting the Sound Settings to the Factory Defaults ............................................................ 26 SeTTING The ChANNelS Storing Channels Automatically ....................... 10 Storing Channels Manually ...............................11 Setting the Channel Lists ................................. 12 Activating the Child Lock .................................. 12 Sorting the Stored Channels ............................ 13 Assigning Channels Names ............................. 13 Fine Tuning Channel Reception ....................... 14 LNA (Low Noise Amplifier) ............................... 14 SeTTING The TIMe Setting and Displaying the Current Time .......... 26 Setting the Sleep Timer .................................... 27 Switching the Television On and Off Automatically .................................................... 27 FuNCTION DeSCRIPTION Choosing Your Language ................................. 28 Using Game Mode ........................................... 28 Setting the Blue Screen Mode / Selecting the Melody ............................................................. 29 Setting the Home Theater PC .......................... 29 Setting the Light Effect (LE40N8 LE46N8). ....... 30 Using the Energy Saving Feature .................... 30 Selecting the Source ........................................ 31 Editing the Input Source Names ...................... 31 SeTTING The PICTuRe Changing the Picture Standard ........................ 15 Adjusting the Custom Picture ........................... 15 Changing the Colour Tone................................ 16 Activating Backlight .......................................... 16 Configuring Detailed Settings on the Picture ... 17 Changing the Picture Size ................................ 18 Freezing the Current Picture ............................ 19 Selecting the Screen Mode .............................. 19 Resetting the Picture Settings to the Factory Defaults ............................................... 19 Digital NR / Active Colour / DNIe / Movie Plus 20 Viewing the Picture In Picture (PIP) ................. 21 HDMI Black Level ............................................. 22 english - 1 USING ThE DTV FEATURE Previewing the DTV Menu System .................. 32 Updating the Channel List Automatically .......... 33 Updating the Channel List Manually ................ 33 Editing Your Favourite Channels ...................... 34 Selecting Channel List ..................................... 36 Displaying Programme Information .................. 36 Viewing the EPG (Electronic Programme Guide) Information ...... 37 Using the Scheduled List ................................. 38 Setting the Default Guide ................................. 38 Viewing All Channels and Favourite Channels .......................................... 39 Adjusting the Menu Translucency .................... 40 Setting up the Parental Lock ............................ 40 Setting the Subtitle ........................................... 41 Setting the Subtitle Mode ................................. 41 Selecting the Audio Format .............................. 41 Selecting the Digital Text ................................. 42 Selecting the Time Zone (Spain only) .............. 42 Viewing Product Information ............................ 42 Checking the Signal Information ...................... 43 Upgrading the Software ................................... 43 Viewing Common Interface .............................. 44 Selecting the CI (Common Interface) Menu ..... 44 Resetting .......................................................... 45 Selecting the Preferred Language (Subtitle , Audio or Teletext) ............................. 45 Preference ........................................................ 46 USING ThE TElETExT FEATURE Teletext Decoder .............................................. 46 Displaying the Teletext Information .................. 47 Selecting a Specific Teletext Page ................... 47 Using Fastext to Select a Teletext Page........... 48 Setting Up Your Remote Control ...................... 48 Remote Control Codes ..................................... 49 SETTING ThE PC Setting up Your PC Software (Based on Windows XP) .................................. 52 Display Modes .................................................. 52 Setting the PC .................................................. 53 Wall-Mount Adjustment(LE40M8, LE46M8, LE52M8, LE40N8, LE46N8)(Sold separately) .................... 54 AboUT ANyNET+ What is Anynet+? ............................................ 55 Connecting Anynet+ Devices ........................... 55 Setting Up Anynet+ .......................................... 56 Scanning and Switching between Anynet+ Devices ............................................................ 56 Recording ......................................................... 57 Listening through a Receiver ........................... 58 Check Points before Requesting Service ......... 58 RECommENDATIoNS FoR USE Using the Anti-Theft Kensington Lock .............. 59 Troubleshooting: Before Contacting Service Personnel ......................................................... 59 Technical and Environmental Specifications ... 60 Warning! Important Safety Instructions ............ 61 Wiring the Mains Power Supply Plug (UK Only).......................................................... 62 Warranty Card .................................................. 62 Symbol Press Important Note One-Touch Button English - 2 list of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Cleaning Cloth Owner's Instructions Registration Cards (Not available in all locations) Registration Cards The stand and stand screw may not be included depending on the model. Installing the Wall Mount Kit Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Remove the stand and cover the bottom hole with a cap and fasten with two screws. english - Viewing the Control Panel [le7M8 le0M8 le6M8 le52M8] 1 2 3 4 76 5 [le0N8 le6N8] 12 3 46 5 57 The product colour and shape may vary depending on the model. 1 SOuRCe Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV). In the on-screen menu, use this button as you use the eNTeR/OK button on the remote control. 2 MeNu Press to see an on-screen menu of your TV's features. In case of DTV mode, the DTV menu appears. 3 Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the and buttons on the remote control. 4 Press to change channels. In the on-screen menu, use the buttons as you use the 5 and 6 buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.) 5 Speakers 6 (Power) Press to turn the TV on and off. 7 Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode. Remote Control Sensor Aim the remote control towards this spot on the TV. english - Viewing the Connection Panel 1 2 3 4 5 3 6 @ ! Power Input 09 8 7 The product colour and shape may vary depending on the model. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1Connecting Set-Top box, VCR or DVD Connector EXT 1 EXT 2 Video Input Audio (L/R) RGB Output Video + Audio (L/R) Only TV or DTV output is available. Output you can choose. -Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. 2 Connecting AuDIO - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater. 3hDMI IN 1,hDMI IN 2, hDMI IN - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players) - No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI? - "High Definition Multimedia interface" allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels). - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. The external devices that support lower versioned HDMI mode may not implement sound output for the TV with the latest HDMI version (HDMI 1.3). In this case, connect to HDMI IN 2 and DVI IN (HDMI 2) "R - AUDIO - L" on the back panel of the TV. Part of lower versioned HDMI cables may cause annoying flickers or no screen display. In this case use the cable that supports the latest HDMI version (HDMI 1.3). DVI IN (hDMI 2) (AuDIO R/l) - When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture. - When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 terminal. You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the "R - AUDIO - L" terminal on DVI for sound output. english - 5 Supported modes for HDMI/DVI and Component HDMI/DVI 50Hz HDMI/DVI 60Hz Component 480i X X O 480p X O O 576i X X O 576p O X O 720p O O O 1080i O O O 1080p O O O 4Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 5Connecting CI (Common Interface) CARD - When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen. - The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. - When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated. You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. Insert the CI-Card in the direction marked on it. 7 Connecting external A/V Devices - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre sponding audio out connectors on the A/V device. - Headphone may be connected to the headphone output (6) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled. 8 Connecting Computer - Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer. 9DIGITAl AuDIO OuT (OPTICAl) - Connect to a Digital Audio Component. 0 SeRVICe - Service connection for qualified service engineer. - Auto Wall-Mount (Refer to page 54 ) ! Connecting Component Devices (DTV/DVD) - Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. - If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set. - The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. - Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. - This LCD TV displays its optimum picture resolution in 1080p mode. - This LCD TV displays its maximum picture resolution in 1080p mode. @Kensington lock - The Kensington lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The place of the Kensington Lock may be different depending on its model. english - 6 Viewing the Remote Control 1Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) (Refer to page 49~51) 2Television Standby button 3Number buttons for direct channel access 4One/Two-digit channel selection 5It display "Channel List" on the screen. 6Selects the TV and DTV mode directly 7VCR/DVD Functions Rewind, Stop, Play/Pause, Fast/Forward 8 Volume increase Volume decrease 9Temporary sound switch-off 0Menu display and change confirmation ! Returns to the previous menu #Electronic Program Guide (EPG) display $Picture size selection %Sound effect selection ^Adjusts 5 separate devices - TV, DVD, STB, CABLE, or VCR. &When pressing this button, a number of buttons on the remote control (e.g. Selects a target device, volume, channel buttons) light up for a few seconds and then turn off to save power. This function is to conveniently use the remote control at night or when dark. *Available source selection (Previous channel )DTV menu display aRecords for Live Broadcasting (Anynet+ function only) (Refer to page 57) bP : Next channel P : Previous channel cExit the OSD dControl the cursor in the menu eUse to see information on the current broadcast fRuns the Anynet view functions and sets up Anynet devices. gColour buttons : Press to add or delete channels and to store channels to the favorite channel list in the "Channel List" menu. hPicture-In-Picture On / Off iDigital subtitle display jPicture effect selection kPicture freeze lWhen your remote does not work, change the batteries and press the "RESET" button for 2-3 seconds before use. Teletext Functions 6Exit from the teletext display 0Teletext index @Alternately select Teletext, Double, or Mix. $Teletext size selection *Teletext mode selection (LIST/FLOF) (Teletext sub page bP : Teletext next page P : Teletext previous page cTeletext cancel eTeletext reveal gFastext topic selection hTeletext hold jTeletext store The performance of the remote control may be affected by bright light. This is a special remote control for the visually impaired, and has Braille points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons. english - 7 Installing batteries in the Remote Control 1. 2. Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the "+" and "­" ends of the batteries with the diagram inside the compartment. Replace the cover. Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.) If the remote control doesn't work, check the following: 1. Is the TV power on? 2. Are the plus and minus ends of the batteries reversed? 3. Are the batteries drained? 4. Is there a power outage, or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby? . Switching On and Off The mains lead is attached to the rear of your set. 1. 2. Plug the mains lead into an appropriate socket. The standby indicator lights up on the front of the set. Press the button on the front of the set. You also can press the POWeR button or the TV/DTV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the set. When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed. To switch your set off, press the POWeR button again. . . Placing Your Television in Standby Mode Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. 2. Press the POWeR button on the remote control. The screen is turned off and a red standby indicator appears on the front of your set. To switch your set back on, simply press the POWeR , numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again. Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. english - 8 Plug & Play When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries. 1. 2. . Press the POWeR button on the remote control. The message "Start Plug & Play" is displayed with "OK" selected. Select the appropriate language by pressing the or buttons. Press the eNTeR/OK button to confirm your choice. Press the or buttons to select "Shop" or "Home", then the eNTeR/OK button. We recommend setting the TV to Home mode for the best picture in your home environment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MeNu button for five seconds on the side panel of the TV. The message "Check antenna input." is displayed with "OK" selected. Press the eNTeR/OK button. Please check that the antenna cable is connected correctly. Select the appropriate country by pressing the or button. Press the eNTeR/OK button to confirm your choice. The message "Some DTV functions may not be available. Digital Scan" is displayed. Press the or button to select "Yes" or "No", then press the eNTeR/OK button. Yes: First an ATV search is performed and then a DTV ch. auto search is performed. No: Only an ATV search is performed. This function is supported for all countries except for the following 6 countries: the United Kingdom, Austria, France, Germany, Italy, Spain. 7. The "Auto Store" menu is displayed with the "Start" selected. Press the eNTeR/OK button. The channel search will start and end automatically. The DTV channel scan menu appears and the DTV channel is automatically updated. If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV. After all the available channels are stored, the "Clock Set" menu appears. Press the eNTeR/OK button at any time to interrupt the memorization process. For detailed descriptions about DTV channel update, refer to page 33 of this manual. After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country. Press the eNTeR/OK button. Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the or buttons. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the or buttons. You can also set the hour and minute by pressing the number buttons on the remote control. Press the eNTeR/OK button to confirm your setting. language: Select your language. Country: Select your country. Auto Store: Automatically scans for and stores channels available in the local area. Clock Set: Sets the current time for the TV clock. english - 9 Plug & Play Start Plug & Play. OK enter exit . 5. 6. 8. 9. If you want to reset this feature... 1. Press the MeNu button to display the menu. Press the or button to select "Setup", then press the eNTeR/OK button. Press the eNTeR/OK button again, to select "Plug & Play". The message "Start Plug & Play" is displayed. (Refer to page 9) TV Setup Plug & Play language Time Game Mode blue Screen Melody PC home Theater PC More Move : english : Off : Off : Off : Off enter 2. . Return Plug & Play Start Plug & Play. OK enter Return - Storing Channels Automatically - Storing Channels Manually TV Channel Country : belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune lNA : Off Move enter Return Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. however, you can sort numbers manually and clear any channels you do not wish to watch. 1. 2. 3. Press the MeNu button to display the menu. Press the or button to select "Channel", then press the eNTeR/OK button. Press the eNTeR/OK button to select "Country". Select the appropriate country by pressing the or button. Press the eNTeR/OK button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for DTV is not changed. Use the Plug & Play function to change the country setting for DTV. (Refer to page 9) Press the or button to select "Auto Store", then press the eNTeR/OK button. Press the eNTeR/OK button. The TV will begin memorizing all of the available channels. Press the eNTeR/OK button at any time to interrupt the memorization process and return to the "Channel" menu. After all the available channels are stored, the "Sort" menu appears. . 5. 6. english - 10 Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1. 2. . . Press the MeNu button to display the menu. Press the or button to select "Channel", then press the eNTeR/OK button. Press the or button to select "Manual Store", then press the eNTeR/OK button. Press the eNTeR/OK button to select "Programme". To assign a programme number to a channel, find the correct number by pressing the or button and then press the eNTeR/OK button. You can also set a programme number by pressing number buttons on the remote control. Press the or button to select "Colour System", then press the eNTeR/OK button. Select the colour standard required by pressing the or button then, press the eNTeR/OK button. Press the or button to select "Sound System", then press the eNTeR/OK button. Select the sound standard required by pressing the or button, then press the eNTeR/OK button. If there is an abnormal sound or no sound, re-select the sound system required. If you know the number of the channel to be stored, press the or button to select "Channel". Press the eNTeR/OK button. Select C (Air channel) or S (Cable channel) by pressing the 5 or 6 button. Press the button to select channel. Select the required number by pressing the or button and then press the eNTeR/OK button. Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode) You can also set a channel number by pressing number buttons on the remote control. 5. 6. 7. 8. 9. 10. If you do not know the channel numbers, press the or button to select "Search". Press the eNTeR/OK button. Search by pressing the or button and then press the eNTeR/OK button. 11. Press the or button to select "Store". Press the eNTeR/OK button to select "OK". 12. Repeat steps to 11 for each channel to be stored. Programme: Selects a program number for the channel. Colour System: Sets the colour supporting system. Sound System: Sets the sound supporting system. Channel: Selects a channel. Search: Scans for the frequency value for the channel. Store: Saves your settings. english - 11 Setting the Channel lists Set the channels according to your preference. You can easily delete, add, or lock the channel you want. 1. Press the MeNu button to display the menu. Press the or button to select "Channel", then press the eNTeR/OK button. Press the or button to select "Channel Manager", then press the eNTeR/OK button. Press the eNTeR/OK button again, to select "Channel List". Press the button to select " " line. Press the or button to select the undesired channel, then press the eNTeR/OK button to cancel. Repeat steps 5 for each channel to be selected or canceled Press the exIT button to exit. " " is active when "Child Lock" is selected to "On". Channel list P 1 C 1 / 10 Prog. 0 1 2 C-C bbC 1 2. . . 5. 6. 7. C7 C75 5 C76 6 S 7 S 8 S6 9 S7 Add Move Page lock enter Return You can select these options by simply pressing the Ch lIST button on the remote control Activating the Child lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child lock cannot be released using the buttons on the side. Only the remote control can release the Child lock setting, so keep the remote control away from children. 1. Press the MeNu button to display the menu. Press the or button to select "Channel", then press the eNTeR/OK button. Press the or button to select "Channel Manager", then press the eNTeR/OK button. Press the or button to select "Child Lock", then press the eNTeR/OK button. Press the or button to select "On" or "Off". Press the eNTeR/OK button. Press the or button to select "Channel List", then press the eNTeR/OK button. Press the button to select " " line. Press the or button to select the channels you want to lock, then press the eNTeR/OK button. Repeat steps 7 for each channel to be locked or unlocked. Press the exIT button to exit. Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active or inactive. english - 12 P 2 C Prog. 0 1 2 C-C bbC 1 TV Channel Manager Channel list Child lock : Off On Move enter Return 2. . . 5. 6. 7. 8. 9. Channel liat bbC1 1 / 10 C7 C75 5 C76 6 S 7 S 8 S6 9 S7 Add Move Page lock enter Return Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often. 1. 2. . Press the MeNu button to display the menu. Press the or button to select "Channel", then press the eNTeR/OK button. Press the or button to select "Sort", then press the eNTeR/OK button. Select the channel number that you wish to change by press ing the or button repeatedly. Press the eNTeR/OK button. The selected channel number and name are moved to right side. Press the or button to move to the position in which you would like to change and then press the eNTeR/OK button. The selected channel is exchanged with the one previously stored to the chosen number. Repeat steps to for another channel to be sorted. Press the exIT button to exit. TV Prog. 0 1 2 Ch. C-C2 C16 C S1 Move TV Channel Country : belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune lNA : Off Move enter Return Sort Name . enter Return 5. 6. Assigning Channels Names Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1. Press the MeNu button to display the menu. Press the or button to select "Channel", then press the eNTeR/OK button. Press the or button to select "Name", then press the eNTeR/OK button. If necessary, select the channel to be assigned to a new name by pressing the or button. Press the eNTeR/OK button. The selection bar is displayed around the name box. To... Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name Then... Press the or button Press the button Press the button Press the eNTeR/OK button TV Prog. 0 1 2 Ch. C-C2 C16 C S1 Move TV Channel Country : belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune lNA : Off Move enter 2. . Return Name Name --------------------enter Return . The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space) 5. 6. Repeat steps to for each channel to be assigned to a new name. Press the exIT button to exit. english - 1 Fine Tuning Channel Reception use fine tuning to manually adjust a particular channel for optimal reception. 1. 2. . . 5. Use the number buttons to directly select the channel that you want to fine tune. Press the MeNu button to display the menu. Press the or button to select "Channel", then press the eNTeR/OK button. Press the or button to select "Fine Tune", then press the eNTeR/OK button. Press the or button to adjust the fine tuning. Press the eNTeR/OK button. Press the exIT button to exit. Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the fine-tuning, select "Reset" by pressing the or button and then press the eNTeR/OK button. Adjust TV Channel Country : belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune lNA : Off Move enter Return Fine Tune P1 0 Reset Save Return LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, the lNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1. Press the MeNu button to display the menu. Press the or button to select "Channel", then press the eNTeR/OK button. Press the or button to select "LNA", then press the eNTeR/OK button. Press the or button to select "On" or "Off". Press the eNTeR/OK button. Press the exIT button to exit. TV TV Channel Country : belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune lNA : Off 2. . . Move enter Return Country Auto Store Manual Store Channel Manager Sort Name Fine Tune lNA : Channel : belgium Off On Return Move enter english - 1 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1. 2. . . Press the MeNu button to display the menu. Press the eNTeR/OK button, to select "Picture". Press the eNTeR/OK button again, to select "Mode". Press the or button to select the desired picture effect. Press the eNTeR/OK button. Press the exIT button to exit. Dynamic: Selects the picture for high-definition in a bright room. Standard: Selects the picture for optimum display in a normal environment. Movie: Selects the picture for comfortable display in a dark room. The Picture mode must be adjusted separately for each input source. You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19) TV TV Picture Mode : Dynamic 100 Contrast brightness 50 75 Sharpness 55 Colour Tint G50 R50 Colour Tone : Cool1 Detailed Settings backlight : 10 More Move enter Return Picture Dynamic Mode : Dynamic Standard 100 Contrast Movie 50 brightness 75 Sharpness 55 Colour Tint G50 R50 Colour Tone : Cool1 Detailed Settings backlight : 10 More Move enter Return You can also press the P.MODe button on the remote control to select one of the picture settings. Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. 1. 2. . . To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. Press the or button to select a particular item. Press the eNTeR/OK button. Press the or button to decrease or increase the value of a particular item. Press the eNTeR/OK button. Press the exIT button to exit. Contrast: Adjusts the lightness and darkness between objects and the background. brightness: Adjusts the brightness of the whole screen. Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. Colour: Adjusts the colours, making them lighter or darker. Tint (NTSC or DTV only): Adjusts the colour of objects, making them more red or green for a more natural look. The adjusted values are stored according to the selected Picture mode. In PC Mode, Only "Contrast" and "Brightness" can be adjusted. "Tint" function is available only in "HDMI" and "Component" mode. TV Picture Mode : Dynamic Contrast 100 50 brightness 75 Sharpness Colour 55 Tint G50 R50 Colour Tone : Cool1 Detailed Settings backlight : 10 More Move enter Return english - 15 Changing the Colour Tone You can select the most comfortable colour tone to your eyes. 1. 2. . . To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) Press the 5 or 6 button to select "Colour Tone", then press the eNTeR/OK button. Press the 5 or 6 button to select the desired colour tone setting. Press the eNTeR/OKbutton. Press the exIT button to exit Cool2: Cool1: Normal: Warm1: Warm2: Makes the colour temperature bluer than "Cool1" menu. Makes whites bluish. Keeps whites white. Makes whites reddish. Makes the colour temperature redder than "Warm1" menu. TV TV Picture Mode : Dynamic Contrast 100 50 brightness Sharpness 75 55 Colour Tint G50 R50 Colour Tone : Cool1 Detailed Settings backlight : 10 More Move enter Return Picture Mode : Dynamic 100 Contrast 50 brightness Sharpness 75 55 Colour Tint G50 Cool 2 R50 Colour Tone : Cool1 1 Cool Detailed Settings Normal backlight : 10 Warm 1 More Warm 2 Move enter Return The adjusted values are stored according to the selected Picture mode. When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected. Activating backlight You can adjust the screen brightness by adjusting the lCD backlight brightness. (0~10) 1. 2. . . To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) Press the or button to select "Backlight", then press the eNTeR/OK button. Press the or button to decrease or increase the value of a particular item. Press the eNTeR/OK button. Press the exIT button to exit. TV Picture Mode : Dynamic Contrast 100 50 brightness 75 Sharpness Colour 55 Tint G50 R50 Colour Tone : Cool1 Detailed Settings backlight : 10 More Move enter Return backlight Adjust 10 Return english - 16 Configuring Detailed Settings on the Picture You can set detailed picture settings. 1. 2. . . Press the MeNu button to display the menu. Press the eNTeR/OK button, to select "Picture". Press the or button to select "Detailed Settings", then press the eNTeR/OK button. Select the required option by pressing the or button, then press the eNTeR/OK button. Available options: Black Adjust, Dynamic Contrast, Gamma, White Balance, My Colour Control, Edge Enhancement, Colour Space When you are satisfied with your setting, press the eNTeR/OK button. Press the exIT button to exit. When the picture mode is set to Movie or Standard, Detailed Settings can be selected. If DNIe is Off, the Detailed Settings cannot be selected when the Picture mode is in Standard mode. black Adjust: Off/low/Medium/high You can directly select the black level on the screen to adjust the screen depth. Dynamic Contrast: Off/low/Medium/high You can adjust the screen contrast so that the optimal contrast is provided. Gamma: - ~ You can adjust the middle brightness of pictures. Press the or button until you reach the optimal setting. White balance: R Offset/G Offset/b Offset/R Gain/G Gain/b Gain/Reset You can adjust the color temperature for more natural picture colors. R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the eNTeR/OK button. Press the or button until you reach the optimal setting. Reset: The previously adjusted white balance will be reset to the factory defaults. My Colour Control: Pink/Green/blue/White/Reset This setting can be adjusted to suit your personal preferences. Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the eNTeR/OK button. Press the or button until you reach the optimal setting. Reset: The previously adjusted colours will be reset to the factory defaults. edge enhancement: Off/On You can emphasize object boundaries. Colour Space: Auto/Wide You can set the color reproduction space for the input signal to Auto or Wide. xVYCC : Off/On Setting the xvYCC mode to On increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature. TV Picture Mode : Movie Contrast brightness Sharpness Colour Tint G50 Colour Tone : Cool1 Detailed Settings backlight : 10 More Move enter 100 50 75 55 R50 Return 5. 6. Detailed Settings black Adjust : Off Dynamic Contrast : Off Gamma : - White balance My Colour Control edge enhancement : Off Colour Space : Auto xvYCC : Off Move enter Return english - 17 Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1. 2. . . Press the MeNu button to display the menu. Press the eNTeR/OK button, to select "Picture". Press the or button to select "Size", then press the eNTeR/OK button. Select the required option by pressing the or button. Press the eNTeR/OK button. Press the exIT button to exit. Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. :: This is the default setting for a video movie or normal broadcasting. Just Scan: Displays the input scenes as they are without any cutoff when HDMI 720p,1080i, 1080p signals are input. "Auto Wide" function is available only in "TV", "Ext.1", "Ext.2", "AV", and "S-Video" mode. In PC Mode, only "16:9" and "4:3" mode can be adjusted. Zoom : Select by pressing the or buttons. Use the or button to move the picture up and down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction. Wide Zoom : Move the screen up/down using the or buttons after selecting the by pressing the or eNTeR/OK button. Picture More Size Screen Mode Digital NR Active Colour DNle Movie Plus Reset Move : Auto Wide : 16 : 9 : Off : Off : Off : Off : OK enter Return Size Auto Wide 16 : 9 Wide Zoom Zoom : Just Scan Move enter Return You can select these options by simply pressing the P.SIZe button on the remote control. english - 18 Freezing the Current Picture Press the STIll button to freeze a moving picture into a still one. Press again to cancel. Selecting the Screen Mode When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the : WSS (Wide Screen Service) image or nothing. each individual european country requires different picture size so this function is intended for users to select it. 1. 2. . Press the MeNu button to display the menu. Press the eNTeR/OK button, to select "Picture". Press the or button to select "Screen Mode", then press the eNTeR/OK button. Select the required option by pressing the or button. Press the eNTeR/OK button. Available options: 16:9, Wide Zoom, Zoom, 4:3 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. Press the exIT button to exit. Picture Size is available in Auto Wide mode This function is not available in PC or Component, HDMI mode. Picture More Size Screen Mode Digital NR Active Colour DNle Movie Plus Reset Move Move : Auto Wide : 16 : 9 : Off : Off : Off : Off : OK enter enter Picture Return Return More Size Screen Mode Digital NR Active Colur DNle Movie Plus Reset Move : Auto Wide 16:9 : 16 : 9 Wide Zoom : Off : Off Zoom : Off : : Off : OK enter Return . Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1. 2. . . To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3 on page 15. Press the or button to select "Reset", then press the eNTeR/OK button. Press the or button to select "OK" or "Cancel". Press the eNTeR/OK button. Press the exIT button to exit. The "Reset" will be set for each picture mode. More Size Screen Mode Digital NR Active Colour DNle Movie Plus Reset Move Picture More Size Screen Mode Digital NR Active Colour DNle Movie Plus Reset Move : Auto Wide : 16 : 9 : Off : Off : Off : Off : OK enter Return Picture : Auto Wide : 16 : 9 : Off : Off : Off : Off : OK OK Cancel enter Return english - 19 Digital NR / Active Colour / DNIe / Movie Plus If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1. 2. Press the MeNu button to display the menu. Press the eNTeR/OK button, to select "Picture". Select the required option by pressing the or button, then press the eNTeR/OK button. Available options: Digital NR, Active Colour, DNIe, Movie Plus. When you are satisfied with your setting, press the eNTeR/OK button. Press the exIT button to exit. Picture More Size Screen Mode Digital NR Active Colour DNle Movie Plus Reset Move : Auto Wide : 16 : 9 : Off : Off : Off : Off : OK enter Return . . Digital NR: Off/low/Medium/high/Auto If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. This function is not available in PC mode. Active Colour: Off/On If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture. This function is not available in PC mode. This function is not available in Movie and Standard mode. DNIe: Off/Demo/On This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. This function is not available in Movie mode Movie Plus: Off/On You can view more natural skin and clear text even in fast moving scenes. Use this function when watching movies. The Wide Zoom, Zoom and Just Scan mode is not supported. This function is not available in PC mode. english - 20 Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. Press the MeNu button to display the menu. Press the or button to select "Setup", then press the eNTeR/OK button. Press the or button to select "PIP", then press the eNTeR/OK button. Press the eNTeR/OK button again. Press the or button to select "On", then press eNTeR/OK button. If the PIP is activated, the size of the main picture turns to "16:9". Press the or button to select "Source",then press eNTeR/OK button. Select a source of the sub picture by pressing the or button and press the eNTeR/OK button. The sub picture can serve different source selections based on what the main picture is set to. Press the or button to select "Size" of the sub picture and then press the eNTeR/OK button. Select a size of the sub picture by pressing the or button and then press the eNTeR/OK button. If main picture is in "PC" and "Component" mode, "Size" is not available. TV TV Mode : Custom Setup equalizer More xT SRS TS : Off Auto Volume : Off energy Saving : Off Internal Mute : Off hDMI black level : low Reset PIP 2. . Move Move enter enter Return Return Mode equalizer PIP TS xT SRS Source Auto Volume Size Internal Mute Position Reset Programme : Custom PIP : On : Off : TV : Off : : Off : :P1 . Move Move enter enter Return Return 5. Press the PIP button on the remote control repeatedly to activate or deactivate the "PIP". 6. Press the or button to select "Position", then press the eNTeR/OK button. Select the position of the sub picture by pressing the or button and then press the eNTeR/OK button. Press the or button to select "Programme" and then press the eNTeR/OK button. You can select the channel that you want to view through sub picture by pressing the or button. Press the eNTeR/OK button. The "Programme" can be active when the sub picture is set to TV. Press the exIT button to exit. You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. Source: Used to select a source of the sub picture. Size: Used to select a size of the sub picture. Position: Used to move the sub picture. Programme: Used to Change the sub picture. 7. 8. PIP Settings O: PIP operates, x: PIP doesn't operate Main Sub Component HDMI PC TV analog O O O Ext.1 O O O Ext.2 O O O AV O O O S-Video Component X X X X X X HDMI X X X PC X X X TV digital X X X english - 21 hDMI black level You can directly select the black level on the screen to adjust the screen depth. 1. Press the MeNu button to display the menu. Press the or button to select "Setup", then press the eNTeR/OK button. Press the or button to select "HDMI Black Level", then press the eNTeR/OK button. Press the or button to select "Normal" or "Low", then press the eNTeR/OK button. Press the exIT button to exit. This Function is active only when the externel input connects HDMI(RGB siginal). TV TV Mode : Custom Setup equalizer More xT SRS TS : Off Auto Volume : Off energy Saving : Off Internal Mute : Off hDMI Reset black level : low PIP 2. . . Move Move enter enter Return Return Mode : Custom Setup equalizer More xT SRS TS : Off Auto Volume : Off energy Saving : Off Internal Mute : Off Normal hDMI black level : low Reset low PIP Normal: The screen gets brighter. low: The screen gets darker. Move Move enter enter Return Return Changing the Sound Standard You can select the type of the special sound effect to be used when watching a given broadcast. 1. Press the MeNu button to display the menu. Press the or button to select "Sound", then press the eNTeR/OK button. Press the eNTeR/OK button again, to select "Mode". Select the required sound effect by pressing the or button repeatedly and then press the eNTeR/OK button. Press the exIT button to exit. TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off : Off : Main 2. . . enter Return TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound Standard : Custom Music : Off Movie Speech : Off Custom : Off : Main Standard: Selects the normal sound mode. Music: Emphasizes music over voices. Movie: Provides live and full sound for movies. Speech: Emphasizes voices over other sounds. Custom: Selects your custom sound settings. (Refer to "Adjusting the Sound Settings") enter Return english - 22 Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences. 1. Press the MeNu button to display the menu. Press the or button to select "Sound", then press the eNTeR/OK button. Press the or button to select "Equalizer", then press the eNTeR/OK button. Press the or button to select a particular item. Press the eNTeR/OK button. Press the or button to reach the required setting. Press the eNTeR/OK button. Press the exIT button to exit. If you make any changes to these settings, the Sound Mode is automatically switched to "Custom". balance 100hz 00hz 1khz khz 10khz Move Adjust Return TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off : Off : Main 2. . . 5. enter Return TV equalizer Setting the TruSurround xT (SRS TS xT) TruSurround xT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MeNu button to display the menu. Press the or button to select "Sound", then press the eNTeR/OK button. Press the or button to select "SRS TS XT", then press the eNTeR/OK button. Press the or button to select "On" or "Off". Press the eNTeR/OK button. Press the exIT button to exit. TruSurround XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off : Off : Main enter Return 2. . . TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off Off : Off On : Off : Main enter Return english - 2 Connecting headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. When you insert the head set jack into the corresponding port, you can operate only "SRS TS XT" and "Auto Volume" in Sound menu. Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. The headphone volume and TV volume are adjusted differently. Selecting the Sound Mode You can set the sound mode by pressing the "DuAl" button. When you press it, the current sound mode is displayed on the screen. Audio Type Mono Stereo Dual Mono Stereo Dual DUAL 1/2 MONO STEREO MONO DUAL 1 DUAL 2 MONO MONO STEREO MONO DUAL 1 DUAL 2 Default Automatic change DUAL 1 Automatic change DUAL 1 You can also set these options simply by pressing the DuAl button on remote control. FM Stereo NICAM Stereo If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. Adjusting the Volume Automatically each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1. Press the MeNu button to display the menu. Press the or button to select "Sound", then press the eNTeR/OK button. Press the or button to select "Auto Volume", then press the eNTeR/OK button. Press the or button to select "On" or "Off". Press the eNTeR/OK button. Press the exIT button to exit. TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off : Off : Main enter Return 2. . . TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off Off : Off On : Main enter Return english - 2 Selecting the Internal Mute If you want to hear the sound through separate speakers, cancel the internal amplifier. 1. Press the MeNu button to display the menu. Press the or button to select "Sound", then press the eNTeR/OK button. Press the or button to select "Internal Mute", then press the eNTeR/OK button. Press the or button to select "On" or "Off". Press the eNTeR/OK button. Press the exIT button to exit. When "Internal Mute" is set to "On", the Sound menus except for "Sound Select" (in PIP mode) cannot be adjusted. TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off : Off : Main 2. . . enter Return Sound : Custom : Off : Off : Off Off On : enter Return listening to the Sound of the Sub Picture During the PIP features activation, you can listen to the sound of the sub picture. 1. Press the MeNu button to display the menu. Press the or button to select "Sound", then press the eNTeR/OK button. Press the or button to select "Sound Select", then press the eNTeR/OK button. Press the or button to select "Sub". Press the eNTeR/OK button. Press the exIT button to exit. TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off : Off : Main 2. . . enter Return Sound : Custom : Off : Off : Off Main : Main Sub Main : Used to listen to the sound of the main picture. Sub : Used to listen to the sound of the sub picture. You can select this option when the "PIP" is set to "On". enter Return english - 25 Resetting the Sound Settings to the Factory Defaults If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 1. Press the MeNu button to display the menu. Press the or button to select "Sound", then press the eNTeR/OK button. Press the or button to select "Reset", then press the eNTeR/OK button. Press the exIT button to exit. You can select this option when the "Game Mode" is set to "On". TV Mode equalizer SRS TS xT Auto Volume Internal Mute Sound Select Reset Move Sound : Custom : Off : Off : Off : Main 2. . enter Return Setting and Displaying the Current Time You can set the TV's clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. 1. Press the MeNu button to display the menu. Press the or button to select "Setup", then press the eNTeR/OK button. Press the or button to select "Time", then press the eNTeR/OK button. Press the eNTeR/OK button to select "Clock Set". To... Press the... Move to Month, Day, Year, Hour or Minute or button. Set the Month, Day, Year, Hour or Minute 5 or 6 button. Press the eNTeR/OK button. 5. Press the exIT button to exit. TV Month p 01 q hour 00 TV Mode : Custom Setup equalizer Plug TSPlay SRS & xT : Off language : english Auto Volume : Off Time Internal Mute :Off Off Game Mode : Reset blue Screen : Off Melody : Off PC home Theater PC : Off More Move enter Return Move enter Return 2. . .