Operating Instructions VACUUM CLEANER Before operating this unit, please read the instructions carefully. Indoor use only. Register your product at www.samsung.com/global/register IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING: Do not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water. 3. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to run unattended at any time. Use the vacuum cleaner only for its intended use as described in these instructions. 4. Do not use the vacuum cleaner without a dust bin. Empty the dust bin before it is full in order to maintain the best efficiency. 5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit. 6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Do not stand on the hose assembly. Do not put weight on the hose. Do not block the suction or the exhaust port. 7. Switch the vacuum cleaner off on the body of the machine before unplugging from the electrical outlet. Disconnect the plug from the electrical outlet before changing the dust bag or dust container. To avoid damage, please remove the plug by grasping the plug itself, not by pulling on the cord. 8. This appliance is not intended for use by young persons or infirm persons without supervision unless they are adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance. 9. The plug must be removed from the socket outlet before cleaning or maintaining the appliance. 10. The use of an extension cord is not recommended. 11. If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent. 12. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. 13. Don't carry the vacuum cleaner by holding the hose. Use the handle on the vacuum cleaner set. 1 1 ASSEMBLING THE CLEANER OPTION Features may vary according to model. CAUTION Please do not press the button of dust bin handle when carrying machine. For storage, park the floor nozzle. 2 2 OPERATING THE CLEANER 2-1 POWER CORD NOTE When removing the plug from the electrical outlet, grasp the plug, not the cord. 2-2 POWER CONTROL (INFRARED CONTROL) - HOSE 1. Vacuum cleaner ON/OFF Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner. 2. Vacuum cleaner MODE (MIN/MID,MAX) Press the MODE button repeatedly to select the correct mode. (ON) MIN MID MAX SENDER HANDLE CONTROL [The cleaner is controlled by using infrared signals.] - BODY Press the power control button repeatedly to select the correct mode. (ON(MAX) OFF) NOTE : If the remote handle control is not working, the cleaner can be operated using the control button on the body of the machine. The filter light is illuminated when the dust pack requires checking or emptying. An audio signal will also sound. The IR light indicates the part that receives the infra-red signal from the handle control. 3 2-3 HOW TO USE AND MAINTAIN THE ACCESSORIES Features may vary according to model. PIPE Adjust the length of the telescopic pipe by sliding the length control button locat- To check for blockages, separate the teleed in the center of the telescopic pipe scopic pipe and adjust to shorten. This allows back and forth. for easier removal of waste clogging the tube. ACCESSORY Push the accessory on to the end of the hose handle. Pull out and turn the dusting brush for cleaning delicate areas. To use the upholstery tool, push the accessory on to the end of the hose handle in the opposite direction. OPTION - Carpet Cleaning - Floor Cleaning Adjust the inlet lever according to the floor surface. Remove waste matter completely if the inlet is blocked. 4 OPTION Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. 1 2 3 Remove waste matter Remove the brushbar such as dust and hair Push the Open button of from the transparent tangled around the the transparent screen brushbar using scissors. cover to separate the cover. screen. For improved pickup of pet hair and fibre on carpets 4 5 6 Remove dust inside the brush housing using a dry duster or crevice tool. Insert brushbar into rotating belt and assemble. Click the transparent screen cover back into place to reassemble. OPTION Clogs on turbine keeps brush from turning, and in this case, take care of it. Turbine Brush To reassemble, align the cover to the Remove waste front of the main body and close. After matter comTurn the lock button to closing the cover, ensure that the lock pletely when `UNLOCK', and remove For picking up pet hair button is turned to the `LOCK' position. and fibre on upholstery inlet is blocked. waste matter. Warning : Use for bedclothes only. Be cautious not to damage brush during unclogging. and bed linen. Brush for blanket 5 3 EMPTYING THE DUST BIN 1 Option 2 3 Once dust reaches the dust full mark, or once the dust full light is on, empty the dust bin. Take the dust bin out by pressing the button. Separate the dust bin cover. CLICK 4 5 6 Throw away dust in the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound. - Empty into a plastic bag (recommended for asthma/allergy sufferers) NOTE You may rinse the dust bin with cold water 6 4 CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK - If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. Turn the vacuum power to 'MAX' HANDLE CONTROL If the filter check indicator turns red with the inlet floating 10 cm above flat floor, clean it. When the indicator light comes on, please empty the Dust Pack(4-2) as shown in the following illustrations. 7 4-2 CLEANING THE DUST PACK 1 2 3 Remove the dust bin and dust pack as shown. Remove the fixed frame of the dust pack cover. Remove the sponge and filter from the dust pack. 4 5 6 Wash the sponge and the filter of the dust pack with water. Let the sponge and filter dry in the shade for more than 12 hours. Put the sponge and filter into the dust pack. 7 8 Before reassembly, align the dust pack cover and dust pack correctly. Put the assembled dust pack into the main body. NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. 8 5 CLEANING THE MOTOR PROTECTION FILTER Take out both the dust bin and the dust pack. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. 6 CLEANING THE OUTLET FILTER Press the fixed frame part at the back of the main body to remove. Pull out the HEPA Filter Dust the HEPA filter. using the tab. Put the HEPA filter into the main body until you hear a `click' sound. 7 CHANGE THE BATTERY(OPTIONAL) BATTERY TYPE : AA Size NOTE 1. When the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer. 2. Use 2 batteries of size AA. WARNING 1. Never disassemble or recharge the batteries. 2. Never heat up the batteries or throw them into fire. 3. Do not reverse (+),(-) poles. 4. Dispose of the batteries properly. 9 - IF YOU HAVE A PROBLEM PROBLEM Motor does not start. Suction force is gradually decreasing. Cord does not rewind fully. CAUSE No power supply. Thermal cut-out. Nozzle, suction hose or tube is blocked. Check that the cord is not twisted or wound unevenly. Crack or hole in hose. Filter is full of dust. REMEDY 0 Check cable, plug and socket. Leave to cool. Check for blockage and remove it. Pull the cord out 2-3m and push the cord rewind button. Check hose and replace if required. Please check filter and, if necessary, clean as illustrated in the instructions. Vacuum cleaner does not pick up dirt. Low or decreasing suction If you have any comments or questions regarding Samsung products, contact the SAMSUNG customer care center. Country AUSTRALIA HONG KONG MALAYSIA SINGAPORE Customer Care Center 1300 362 603 3698-4698 1800-88-9999 1800-SAMSUNG (7267864) Web Site www.samsung.com/au www.samsung.com/hk www.samsung.com/my www.samsung.com/sg 10 DJ68-00359P REV(0.0) ...