Indoor unit SH09AWH SH09ZWH SH12AWH SH12ZWH Outdoor unit SH09AWHX SH09ZWHX SH12AWHX SH12ZWHX ¢IAIPOYMENO K§IMATITMTIKO ¢øMATIOY (æÍË~ Î·È £¤ÚÌ·ÓÛË~) E§§HNIKA E S F I P D G DB98-15083A(3) DEUTSCH Split-type Room Air Conditioner (Cool and Heat) Aire acondicionado doméstico sistema Split (Refrigeración y Calefacción) Climatiseur de type Séparé (Refroidissement et Chauffage) Condizionatore d'aria per ambienti ad unità Separate (Raffreddamento e Riscaldamento) Aparelho de ar condicionado tipo Split (Refrigeração e Aquecimento) Geteilte raumklimaanlage (Kühlen und Wärmen) PORTUGUÊS ITALIANO FRANÇAIS ESPAÑOL OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION ISTRUZIONI PER L'USO MANUAL DE INSTRUÇÕES GEBRAUCHSANWEISUNG ¢°TM ÃTM ENGLISH Safety Precautions The following safety precautions must be taken when using your air conditioner. Risk of electric shock. · Can cause injury or death. · Disconnect all remote electric power supplies before servicing, installing or cleaning. · This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Users of this product are cautioned not to attempt repair of this product at their own discretion. Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased. Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center. Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury. Keep children away from the unit. Do not place any obstacles in front of the unit. Do not spray liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. Make sure that the unit is correctly ventilated at all times: Do not place clothing or other materials over it. If the wireless remote control will not be used for a long time, remove the batteries. (If applicable) When using a wireless remote control, the distance should not be more than 7 meters from the air conditioner. (If applicable) WARNING DURING OPERATION DISPOSING OF THE UNIT Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely for recycling reasons. When you need to dispose of the unit, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and come into contact with your skin, causing injury. Releasing refrigerant into the atmosphere also damages the environments. Please recycle or dispose of the packaging material for this product in an environmentally responsible manner. OTHERS Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor. The appliance is not intended for use by young children or infirm persons without supervision: Young children should be supervised to ensure that they do not play with the appliance. Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency. E-2 Contents PREPARING YOUR AIR CONDITIONER Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . . Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . OPERATING YOUR AIR CONDITIONER Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . . Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Heating Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . . Selecting Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . . Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . . PROGRAMMING YOUR AIR CONDITIONER Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the 1 Hour Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECOMMENDATIONS FOR USE Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . Operating Your Air Conditioner Without the Remote Control . . . . . Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning Deodorizing and Bio filter (Option) . . . . . . . . . . . . . . . . . TECHNICAL SPECIFICATIONS 2 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 23 24 25 25 E-3 ENGLISH View of the Unit The design and shape are subject to change according to the model. Indoor Unit Temperature sensor On/Off switch Air filter (under the grille) Air flow blades (outlet) Air Inlet Operation indicator (GREEN) Timer indicator (GREEN) Turbo indicator (RED) On/Off switch E-4 Outdoor Unit SH30ZC1(C2)X Air Inlet (Rear) Air Outlet Connection Valve E-5 ENGLISH Remote Control - Buttons and Display Remote control transmission indicator Temperature and Timer setting Battery life indicator 1 Hour Timer indicator On Timer setting Off Timer setting Operating mode ( AUTO, COOL, DRY, FAN, HEAT) Air flow direction Fan speed Turbo button Turbo mode Sleep mode Energy saving On/Off button 1 Hour Timer button Mode selection button (AUTO, COOL, DRY, FAN, HEAT) Temperature button Fan speed button Energy Saving button Airflow control button Sleep button Timer Set/ Cancel button Battery check button On Timer button Off Timer button Note Each mode indicator shows each mode as well as the battery life. If you want to check the battery, press the button. The more is a battery life indicator, the longer will remain the battery life. If one battery life indicator remains, replace new batteries. E-6 Getting Started You have just purchased a split type air conditioner and it has been installed by your installation specialist. Your Owner's Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit's features. The booklet is organized as follows. The following figures are shown on pages from 4 to 6 : - Indoor and outdoor units - Remote control(buttons and display) They will help you find the buttons and understand the symbols displayed. In the manual, you will find a series of step-by-step procedures for each function available. The illustrations in the step-by-step procedures use three different symbols: PRESS PUSH HOLD DOWN E-7 ENGLISH Inserting the Remote Control Batteries You must insert or replace the remote control batteries when : You purchase the air conditioner The remote control does not work correctly Note Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used. 1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. 2 Insert the two batteries, taking care to respect the polarities : + on the battery with + on the remote control. - on the battery with - on the remote control. 3 Close the cover by sliding it back until it clicks into place. E-8 Selecting the Automatic Operating Mode ENGLISH You can start the air conditioner in Auto mode from your remote control. In the Auto mode, the cooling and heating operation is selected automatically. You can also raise or lower the temperature and the fan speed in the Auto mode. 1 If necessary, press the Result: button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Auto mode. The Auto mode cools and heats the room in optimum condition by adjusting the indoor temperature depending on the set temperature. The mode may change from cooling into heating, from heating into cooling depending on the current temperature during operation. You can change modes at any time. Note 3 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 16°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps E-9 Cooling Your Room You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when cooling 1 If necessary, press the Result: button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the The air conditioner runs in the Cool mode. You can change modes at any time. button. Note 3 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 16°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating. 4 Select the fan speed by pressing the until the required setting is displayed: Automatic (rotated : Low Medium High Maximum Result: Each time you press the beeps. button one or more times ) button, the indoor unit 5 To control the direction of the air flow, refer to pages 16 and 17. E-10 Heating Your Room ENGLISH You must select the Heat mode if you wish to adjust the: Heating temperature Fan speed when heating 1 If necessary, press the Result: button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped It will start up normally after three minutes. IMPORTANT 2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: Note The indoor unit beeps each time you press the The air conditioner runs in the Heat mode. You can change modes at any time. button. 3 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 16°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps If the room temperature reaches the set temperature (selected temperature+5°C), the air conditioner stops heating, but the fan is still operating. The air conditioner starts heating, provided that the room temperature is lower than the desired temperature (selected temperature+3°C). button one or more times ) 4 Select the fan speed by pressing the until the required setting is displayed: Automatic (rotated : Low Medium High Maximum Result: Each time you press the b ...