OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES ISTRUZIONI PER L'USO MANUAL DE INSTRUÇÕES MANUEL D'UTILISATION GEBRAUCHSANWEISUNG ¢°TM ÃTM àçëíêìäñàü èéãúáéÇÄíÖãü Indoor unit SC30ZA2 SC30ZC1(C2)(C3)(C4) AST30C1(C2)(C3)(C4)BE AST32C1(C2)BE AS30C1(C2)(C3)(C4)BC AS32C1(C2)(C3)(C4)BC Outdoor unit SC30ZA2X SC30ZC1(C2)(C3)(C4)X UST30C1(C2)(C3)(C4)BE UST32C1(C2)BE US30C1(C2)(C3)(C4)BC US32C1(C2)(C3)(C4)BC ¢IAIPOYMENO K§IMATITMTIKO ¢øMATIOY (æÍË~) äéåçÄíçõâ äéçÑàñàéçÖê ëàëíÖåõ ëèãàí (éiÎÊÂÌËÂ) E S I P F D G R DB98-04803A(5) RUSSIAN E§§HNIKA DEUTSCH Split-type Room Air Conditioner (Cool) Aire acondicionado doméstico sistema Split (Refrigeración) Condizionatore d'aria per ambienti ad unità Separate (Raffreddamento) Aparelho de ar condicionado tipo Split (Refrigeração) Climatiseur de type Séparé (Refroidissement) Geteilte raumklimaanlage (Kühlen) FRANÇAIS PORTUGUÉS ITALIANO ESPAÑOL ENGLISH Safety Precautions The following safety precautions must be taken when using your air conditioner. 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. Do NOT insert anything between the air flow blades, as the inner fan may become damaged and you may be hurt. Keep children away from the indoor unit. Do NOT place any obstacles in front of the outdoor unit. If the remote control will not be used for a long time, remove the batteries. Users of this product are cautioned not to attempt repair of this product at their own discretion. Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service centre. This device must be installed according to the national electrical rules. Before disposing of the remote control it is necessary to remove batteries. 2 3 4 5 6 7 8 9 10 The appliance is not intended for use by young children or infirm person without supervision; young children should be supervised to ensure that they do not play with the appliance. 11 Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency. CAUTION The manufacturer does not take any responsibility for any accidents that occur because the air conditioner is not fixed firmly or installed securely, during installing or using the product. In case you experience difficulty in installation, you must use an installation specialist. An accident will occur if the installation is not done as recommends in the installation guide. E-2 Contents PREPARING YOUR AIR CONDITIONER Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . .6 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . .8 OPERATING YOUR AIR CONDITIONER 5 Way Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . .10 Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Changing the Room Temperature Quickly . . . . . . . . . . . . . . . .12 Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . .15 Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . .15 PROGRAMMING YOUR AIR CONDITIONER Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 RECOMMENDATIONS FOR USE Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . .19 Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . .20 Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . .20 Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Installing a Filter (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 TECHNICAL SPECIFICATIONS E-3 ENGLISH View of the Unit The design and shape are subject to change according to the model. Indoor Unit A Air filter (under the grille) Air Inlet Air flow blades (outlet) On/Off & 5 Way selection button/ Remote Control Sensor STANDARD NATURE POWER SAVING SILENCE TIMER Indoor Unit C Air filter (under the grille) Air Inlet Air flow blades (outlet) On/Off & 5 Way selection button/ Remote Control Sensor TIMER indicator STANDARD indicator NATURE indicator SAVING indicator POWER indicator SILENCE indicator Note E-4 For details on the 5 Way, refer to page 9. Outdoor Unit Air Inlet(Rear) SH30ZC1(C2)X Air Outlet Connection Valve E-5 ENGLISH Remote Control - Buttons and Display Remote control transmission indicator Operating mode ( AUTO, DRY, COOL, FAN) Mode selection button (AUTO, COOL, DRY, FAN) Temperature setting Turbo mode Sleep mode Fan speed Air flow direction On Timer setting Off Timer setting Battery discharge indicator Temperature adjustment buttons Turbo/Sleep mode selection button Fan speed adjustment button Swing button On Timer button Off Timer button 5 Way selection button On/Off & Timer Set/Cancel button E-6 Getting Started You have just purchased a split type air conditioner and it has been installed by your installation specialist. Your Owner's Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit's features. The booklet is organized as follows. The following figures are shown on pages from 4 to 6 : - Indoor and outdoor units - Remote control(buttons and display) They will help you find the buttons and understand the symbols displayed. In the main part of the installation book, you will find a series of step-by-step procedures for each function available. The illustrations in the step-by-step procedures use three different symbols: PRESS PUSH HOLD DOWN E-7 ENGLISH Inserting the Remote Control Batteries You must insert or replace the remote control batteries when : You purchase the air conditioner The remote control does not work correctly Note Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used. 1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. Insert the two batteries, taking care to respect the polarities : + on the battery with + on the remote control. - on the battery with - on the remote control. Close the cover by sliding it back until it clicks into place. 2 3 E-8 5 Way Function ENGLISH You can select the 5 Way function with operating mode of the air conditioner for more comfortable circumstances. You can use the 5 Way function with the indoor unit as well as the remote control. Thus, you can use this function even though you have lost your remote control. Using with the indoor unit 1 Press the mode. (ON/OFF) button one time and then select the desired To obtain a(n)... Normal operating Reducing the uncomfortable temperature gradually High fan speed Compressor run time reduced Fan speed reduces as the temperature decreases Then select... (STANDARD) mode (NATURE) mode (POWER) mode (SAVING) mode (SILENCE) mode 2 To stop the operating, press the turn off. Note (ON/OFF) button until all indicators Even if the air conditioner has been turned on via the ON/OFF button on the unit, operations can still be controlled using the remote control as usual. Selecting with the Remote Control To select the 5 Way function with the remote control, press the 5 Way button one or more times until the desired mode is selected. Each time you press the 5 Way button: Each 5 Way indicator on the indoor unit lights up in order. E-9 Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed. 1 If necessary, press the Result: (On/Off) button. The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the MODE button. The air conditioner runs in AUTO mode. You can change modes at any time. Note 3 To adjust the standard temperature (The air conditioner automatically set the standard temperature by the current room temperature.), press the TEMPERATURE buttons one or more times. Standard temperature SET TEMP. SET TEMP. +1°C +2°C SET TEMP. SET TEMP. -2°C -1°C < When you feel hot > < When you feel chilly > E-10 Cooling Your Room ENGLISH You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when cooling 1 If necessary, press the Result: (On/Off) button. The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the MODE button. The air conditioner runs in COOL mode. You can change modes at any time. Note 3 To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: Each time you press the TEMPERATURE buttons: - The temperature is adjusted by 1°C - The indoor unit beeps The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate. 4 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Automatic (rotated : Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. ) 5 To control the direction of the air flow, refer to page 15. E-11 Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible. Example : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the Result: (On/Off) button. The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 Press the Result: button. The temperature and fan settings are adjusted automatically. The air conditioner cools the room as quickly as possible. After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. But, if you press the button in DRY or FAN mode, it will change to AUTO mode automatically. 3 If you wish to stop the Turbo function before the end of the 30-minute period, press the button one or more times until or disappears. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 4 To control the direction of the air flow, refer to page 15. E-12 Removing Excess Humidity ENGLISH If the atmosphere in your room is very humid or damp, you ca ...