Samsung Video Security System SHR-1040/SHR-1040K Products Standalone DVR DIY Monitor Time Lapse VCR SHR-1040 SHR-1040K SMO-120S SMO-151QN SMO-210DN SVR-1280 2/23 Standalone DVR SHR-1040 3/23 Accessory No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Item DVR User Manual Warranty Card Adapter Power Cord Remote Controller Battery Alkaline CAMERA Camera Bracket Camera Cable Screw Sensor Connector Model SHR-1040 ADP-5412WD SOC-N120 SOC-C120 SBR-110S MCB-60 - Q'ty 1 1 1 1 1 1 2 2 2 4 4 12 4 SHR-1040/XAA O O O O O O O X X X X X X SHR-1040K/XAA O O O O O O O O O O O O O 4/23 Part Names & Functions 5/23 Part Names & Functions 6/23 System Configuration 7/23 FEATURE SAMSUNG SHR-1040 Record video at the speed of 120 IPS (All channel real time recording) Various display mode (1ch - Full Screen, Quad, Sequence, Freeze, Zoom, PIP) High quality recording with MPEG4 Pre Alarm and Post Alarm recording Recording Video & audio simultaneously. Various recording mode (Time Lapse, Event (Alarm & Motion), Timer) Motion Detection LOREX L154-81 Supports 2 disk drives (1 internal/1 removable) Remote Control or Main Panel operation Viewing options: Quad, Full Screen Quick Multiple Search Capability 3 Adjustable Video Quality Settings: High, Normal, Basic, High quality recording with modified M-JPEG compression (5~20Kbyte/frame) Alarm terminal block - integrated 8/23 FEATURE · 120 ips VS 30 ips 120ips 4CH Real Time Recording 4CH Real Time Recording 30ips 45 60 15 30 LOREX L154-81 SAMSUNG SHR-1040 9/23 FEATURE · Various Display mode SAMSUNG Display Mode 1ch - Full Screen, Quad, Sequence, Freeze, Zoom, PIP LOREX Quad 1CH Full Screen Quad Sequence PIP 10/23 FEATURE · Recording Video & Audio SAMSUNG Audio Input Audio Output 4 CH(RCA) 2 CH(RCA) LOREX - SHR-1040 Video and audio can be recorded simultaneously. 11/23 FEATURE SAMSUNG Motion Detection Motion Detection Level Motion Area Each CH High, Normal, Low 9 Area LOREX - Motion Detection 12/23 FEATURE · Various Video in/output SAMSUNG Video Input Video output 4CH BNC, 4CH RJ-11(DIY CAMERA) 2 BNC, 2 RCA, 1 VGA LOREX 4CH BNC 2 BNC DIY Camera BNC RCA SHR-1040 VGA Normal Camera 13/23 FEATURE · VGA Output SAMSUNG VGA output O LOREX X VGA output SHR-1040 14/23 FEATURE When user record same video by mpeg4 and m-jpeg, mpeg4 can record longer time than m-jpeg. mpeg4 Recording time m-jpeg 15/23 FEATURE SAMSUNG Video Record Resolution 1CH : 704 x 240 4CH : 352 x 240 LOREX 1CH : 640 x 224 Quad :320 x 112 704 X 240 640 X 224 SHR-1040 L154-81 16/23 FEATURE · Pre & Post Alarm Recording SAMSUNG Pre Alarm Main Alarm Post Alarm Off, 1, 2, 3, 4, 5sec Off, 10, 20, 30sec, 1, 2, 3, 4, 5min, Auto Off, 10, 20, 30sec, 1, 2, 3, 4, 5min LOREX Off, 5, 10, ~ 55, 60 90, 120, ~ 210, 240 Alarm Pre Alarm Recording Main Alarm Recording Post Alarm Recording Pre Alarm Recording Main Alarm Recording Post Alarm Recording 5sec 5min 5min 17/23 Q&A ·Q&A TROUBLE · After power supply, the Unable to supply power. screen is all black. · The POWER LED in front if the system remains off and the system is not running. CHECK POINT · Checkthe power cable ·Check the adapter cable connection.behind the system, connection · Check the video output cable power supply. and connection. · Check the camera output. · Check the video output mode. If DVR is set to CVBS mode, you can't see the image on VGA monitor. mode change hidden key : Mode key + CH 1 ·Refer to 6-12p, 6-13p of User manual 18/23 Q&A ·Q&A TROUBLE · Remote controller isn't operated. CHECK POINT · Set the DVR's system ID and Remote Controller ID. ·Refer to 6-12p of User manual 19/23 Q&A ·Q&A TROUBLE · Lost Password. CHECK POINT · Factory Reset Hidden Key : Mode Key + CH 2 · The Password and all setting value will return to the initial default value. · Default Password is `4321' . · Refer to 6-10p, 6-12p of User manual 20/23 Q&A ·Q&A TROUBLE · Video output is scrambled. CHECK POINT · Check to connect the Video In(BNC input) and RJ-11 In(DIY camera) with the same channel at the same time. · If connecting them simultaneously, two input signals are mixed. · Please connect only one between the two inputs. 21/23 Q&A ·Q&A TROUBLE · Audio isn't sounded. CHECK POINT · Check the audio cable and connection. · Check to Select the desired audio channel. S marker is displayed on channel which is selected. · Only one channel which display S marker is sounded in live mode. 22/23 Thank you. 23/23 ...