DIGITAL VIDEO RECORDER SHR-1040/SHR-1040K User's Manual English Français Spanish SHR-1040/1040K USER'S MANUAL Safety Regulations Please be sure to keep the following in mind for the right use of the product to pre-vent proprietary risk or damage. I Do not use multiple plugs at once. G This may cause abnormal heat generation or fire I Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you. G This may cause fire. This may cause fire. This may cause electric shock. This imperfect connection may cause fire. This may cause fire or electric shock. I Do not bend the power cord forcibly nor put a heavy material on it. G I Do not touch the power plug with wet hands. G I Insert the power plug firmly enough not to shake. G I Keep the product off humidity, dust, or soot. G I Do not put metals(coin, hair pin, metal piece, etc.) or inflammable materials(match, paper, etc.) in the ventilation hole. G This may cause fire. I Keep the surrounding temperature between 32°F to 104°F and keep the product off humidity. G This may cause breakdown. This may cause abnormal operation due to high temperature. I Secure sufficient ventilation. G I Keep the product off direct ray of light or heat from the heating device G This may cause fire. This may cause fire, electric shock, or injury due to abnormal operation. I Do not disassemble, repair, or remodel the product. G I Do not pull out the power cord. G This may destroy the power cord, eventually, cause fire or electric shock. This may cause fire. I Plug out in the event of thunder or lightning. G I Keep your children off the battery after you take it out of the product. They tend to swallow it unconsciously. G If your children swallow it, please see the doctor immediately. I Install the product at a safe place or attach the product to the wall or ceiling with a stand firmly enough not to fall to the ground. G This may injure people. ii English Before we start This User's Manual describes the basic usage of SHR-1040. This Manual contains all the matters necessary for using SHR-1040 such as brief instruction, part name, function, connecting other equipment, and menu setup of SHR-1040. - SEC retains the copyright on this User's Manual. - This User's Manual cannot be copied without SEC's prior written approval. - We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of User's Manual. - If you want to open the system case to touch the inside, please consult with an expert who works for the shop where you bought the product. - You may download open source codes from the following website. (See CCTV Part of http://www.sec.co.kr) WARNING [Battery] As wrong exchange of the battery in SHR-1040 may cause explosion, you shall use the certified battery for SHR-1040. The battery specification is as follows. -Normal Voltage : 3V -Normal Capacity : 220mAh -Continuous Standard Load : 0.2mA -Operating Temperature : -22°F ~ +140°F Standards Approvals Note : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance whit the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. English iii Contents ii iii Safety Regulations Before we start Standards Approvals 1 1-1 1-2 1-3 1-6 2 2-1 2-2 2-3 3 3-1 3-5 4 4-1 4-2 5 5-1 5-2 5-3 5-3 5-3 5-4 5-4 5-5 5-5 iv Chapter 1. Overview 1. Introduction 2. Features 3. Part Names and Functions 4. Remote Controller Chapter 2. Installation 1. Installation Environment Setup 2. Checking Product & Accessory 3. HDD Addtion Chapter 3. DIY Carmera 1. Standard Camera 2. Nightvision Camera Chapter 4. Connecting with Other device 1. Connecting the Video, Audio, and Monitor 2. Connecting the Alarm Input/Output Chapter 5. Basic Operation 1. System Operation 2. Live Screen Mode 3. Key Functions 3.1. Channel Key & Mode Key 3.2. Pip Key 3.3. Zoom Key 3.4. Freeze Key 3.5. Sequence Key 3.6. Alarm Key English 6 6-1 6-2 6-3 6-4 6-5 6-6 6-7 6-9 6-10 6-14 7 7-1 7-1 7-2 7-2 7-3 8 8-1 8-2 8-2 8-3 8-3 8-4 8-4 9 9-1 9-4 9-5 Chapter 6. Menu Setup 1. Main Setup Menu 2. Clock/Display Setup 3. Record Mode Setup 4. Title Setup 5. Dwell Time Setup 6. Alarm Setup 7. Event Record Mode Setup 8. Timer Record Setup 9. System Setup 10. System Information Chapter 7. Recording 1. Basic Recording 2. Timer Recording 3. Motion Recording 4. Alarm Recording 5. Stop Recording Chapter 8. Search & Playback 1. Search Menu 2. Date Time Search 3. Record Event Search 4. Alarm Event Search 5. Loss Event List 6. Power Event List 7. Basic Playback Chapter 9. Appendix 1. Product Specification 2. Recommended HDD List 3 .Outline Drawing English v Chapter 1. Overview English 1 SHR-1040/1040K USER'S MANUAL 1 Introduction The SHR-1040 digital video recorder is a digital video recorder that records and plays back video and audio input from four cameras. It records and plays back each channel of video data in MPEG4 format, and audio data in installed HDD format, by using the G-723 compression standard. G DVR is a digital device that stores video and audio data by using a hard disk drive, unlike a video cassette recorder using video tapes. DVR enables users to easily play back and search stored data, and edit and send data which are stored in digital signal format. Users can compress, store and send moving images, and search listings on an hourly or daily, camera unit and event basis by using this DVR with standard video and data compression technology. 1-1 English 2 Features Adjusts recorded data in three steps. - HIGH, NORMAL, LOW I Adjusts the number of record fields per second. - NTSC : 1~ MAX 30 IPS I Records before-event (Alarm or Motion) data based on pre-set hours. (Pre-Alarm) - 0 ~ 5SEC I Audio-records and plays back selected channels. I Offers a timer used for time record. I Records video and audio with alarm. I Offers various playback speeds. I Offers easy-to-use search functions. - Date & Time Search, Event(Record, Alarm, Motion, Timer) Search I Instantly pauses the current screen. (FREEZE) I Offers 2X Zoom for video images monitored or played back by the user. I Offers a variety of screen split modes. - Full Screen Display, 4 Split Display, Sequence Display, PIP Display I Allows the user to enjoy audio and video over a PC monitor through VGA Out. I English 1-2 SHR-1040/1040K USER'S MANUAL 3Par t Names & Function [SHR-1040] No. Name Function Displays power On/Off condition. lights on when an event occurs. Displays Normal Access to HDD. Upon Access to HDD, LED repeats on and off. Displays the record condition. The screen is switched to Single Mode when each channel key is pressed during live programming, and the screen of the channel is displayed in Full Screen. During initial booting, the screen is displayed in four split. single or split screen. Power LED Alarm LED 1 HDD LED Rec LED 1 4 2 ... MODE CH1, CH2, CH3, CH4 3 SEARCH Screen Split When the Mode Key is pressed, the screen is switched to Selection Button SEARCH Enters the date/time of video and audio signals recorded in HDD, select events from the RECORD and ALARM EVENT SEARCH, and views the POWER EVENT LIST and LOSS EVENT LIST. 4 MENU 5 MENU Displays the MAIN MENU, and exits the MENU Screen by pressing the button again. Enters the PIP Mode when the PIP Button is pressed in the Single Screen. There must be two or more input channels. (1) PIP is enabled when the sequence of the Single Screen (Main Screen) is turned off. (2) The Main Screen moves to Channel 1, 2, 3 and 4 in sequence when the up/down or left/right button is pressed. (3) Main-Sub switching: The screen is switched when the Enter Button is pressed in the PIP Screen while the Sequence is turned off. PIP 6 PIP 1-3 English No. ZOOM Name Function You can view X2 screen by pressing the ZOOM Button in the single screen. When you press the up/down and the left/right key in the Zoom screen, the selected Zoom Area moves. Press the Enter button to view X2 Zoom Screen of the selected area. Press the Freeze Button to freeze the current displayed screen, and press the Freeze Button again to cancel the Freeze. The Freeze marker is displayed on top of the screen in Freeze Mode. 7 ZOOM FREEZE 8 FREEZE SEQUENCE 9 SEQUENCE ALARM When pressing the Sequence Button in the Single Screen, the screen is switched to each channel with video In. 10 ALARM RECORD Fast/Step Reverse STOP PLAY/PAUSE Fast/Step Forward When the Alarm Button is selected, the Alarm is canceled. 11 In Normal Record Mode, video signals are recorded. Fast Reverse: Used for fast search in reverse direction playback. Step Reverse: Used for cut-by-cut search in reverse direction during pause. Ends search during playback and recording. 12 13 14 Operates in toggle for play/pause during playback. Fast Forward: Used for fast search in forward direction during playback. Step Forward: Used for cut-by-cut search in forward direction during pause. Direction key used to set the details of the Menu. Used to increase the value of setting, or direction key used to set the details of the Menu. Direction key used to set the details of the Menu. Used to decrease the value of setting, or direction key used to set the details of the Menu. Plays the role of Enter Key when setting the Menu. 15 16 English 1-4 SHR-1040/1040K USER'S MANUAL [SHR-1040] Caution The ventilation outlet may be blocked. Do not operate the DVR on a carpet or other soft surfaces. When you operate the DVR in a cabinet or on a rack, check whether a ventilation device is properly installed. No. 1 Name Function Connector linked to the Port DIY CAMERA. Composite video signal input connector (BNC Style Connector) Composite video signal output connector (BNC Style Connector) VGA video signal output connector Audio signal input connector (RCA Jack) Video signal output connector (RCA Jack) Audio signal output connector (RCA Jack) - ALARM IN: Alarm input connector. Receives alarm signals from outside. - ALARM OUT: Alarm output connector. Sends alarm signals to external devices. - ALARM RESET: Alarm reset connector Supports 12V power socket. CAM IN RJ-11 BNC VIDEO IN BNC VIDEO OUT VGA AUDIO IN RCA VIDEO OUT RCA AUDIO OUT 2 3 4 5 6 7 8 ALARM 9 DC IN 1-5 English 4 Remote Controller 1. RECORD Starts the recording as the setup record setting in normal record mode. 15. SYSTEM ID Confirms system and remote control ID and changes the remote control ID. 2. ID RESET The ID is reset. 16. PIP In Single mode, press to watch another channel in a sub picture. 3. NUMBER KEY Press to select one of single channels in Live mode. Use this for typing purposes in a numeric input mode. 17. SEQUNCE The single channel mode switches according to the specified time on the menu. 4. MODE Selects split-screen. 18. ALARM Cancels the alarm while the alarm is going off. 5. FREEZE Runs the FREEZE function in live mode. 19. 6. ZOOM Press to enlarge the single channel picture to its double. II Play/Pause : pauses and resumes the search screen while in play. FF (fast forward) : used for quick forward search while in play. 20 . 7. (STOP) Ends search during playback and recording. FR (fast reverse) : used for quick backwardsearch while in play. 8. 21. SEARCH Searches for data on the HDD. 22. Used for changing settings or for moving the cur-sor up/down/left/right in live mode and on the menu and search screens. 9. MENU Either goes to the system menu screen or moves to the upper menu from the lower menu. 10. (ENTER) Shows the cursor for the channel selection in live mode or used as the select button for menu setup. 23. PWD LOCK You can check if the password lock (PWD LOCK) is set to ON/OFF. 24. SYS INFO. 11. REC LOCK You can check if REC LOCK is set to ON/OFF. You can check out information on the system version. 25. CH 3 Displays SINGLE CH 3. 12 . MONITOR OUT You can check which mode is set for the current monitor output. 26. CH 4 Displays SINGLE CH 4. 13. CH 1 Displays SINGLE CH 1. 14. CH 2 Displays SINGLE CH 2. To change the remote control ID While pressing the SYS ID key, enter the numeric ID in two digits (Default ID: 00). ex) If you want to change the remote control ID to "08": While pressing the SYS ID key, enter 0 and 8 and press it again to check if the ID is changed to 08. English 1-6 Chapter 2. Installation English 2 SHR-1040/1040K USER'S MANUAL 1 Installation Environment Setup Do not play D ...