COLOUR TELEVISION SP43L2HX SP50L2HX SP61L2HX SP46L5HX SP56L5HX Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE (PIP) TELETEXT Safety Instructions ENG Do not expose the television to extreme temperature conditions or to extreme humidity conditions. Do not expose the television to direct sunlight and other sources of heat. Do not expose the television to any liquids. Never put objects of any kind into the television, and do not place a water-containing vessel on the television. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. Do not step on or twist the power cord. Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. If the television is broken, do not try to repair it yourself. Contact qualified service personnel. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. Do not drop the remote control. This device is not for use in industrial environments. Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and arrow head within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. 2 ENG Contents FOREWORD Safety Instructions ......................................................................................... Caution .......................................................................................................... Replacing the Lamp....................................................................................... 2 2 5~6 CONNECTING AND PREPARING YOUR TELEVISION Control Panel of Your Television ................................................................... 7~8 Connection Panel of Your Television ............................................................ 9 Connecting to an Aerial or Cable Television Network ................................... 10 Connecting a Satellite Receiver or Decoder.................................................. 10 Connecting Additional Speakers ................................................................... 11 Inserting the Batteries in the Remote Control................................................ 11 Infrared Remote Control ................................................................................ 12 Switching Your Television On and Off........................................................... 13 Placing Your Television in Standby Mode ..................................................... 13 Becoming Familiar with the Remote Control ................................................. 14 Plug & Play Feature....................................................................................... 15~16 Choosing Your Language.............................................................................. 16 SETTING THE CHANNELS Storing Channels Automatically..................................................................... 17 Storing Channels Manually............................................................................ 18~19 Skipping Unwanted Channels ....................................................................... 20 Sorting the Stored Channels ......................................................................... 21 Assigning Names to Channels ...................................................................... 22 Activating the Child Lock ............................................................................... 23 Selecting a Channel by Information............................................................... 24 USING YOUR TELEVISION (continued) Changing the Picture Standard ..................................................................... Adjusting the Picture Settings........................................................................ Adjusting the Picture Settings (PC or DVI Mode) .......................................... Setting the Picture (PC Mode)....................................................................... Using the Fine Tune ...................................................................................... Viewing the Channel Scan Picture ................................................................ Freezing the Current Picture ......................................................................... Using the LNA (Low Noise Amplifier) Feature............................................... Selecting the Picture Size.............................................................................. Using the Digital NR (Digital Noise Reduction) Feature ................................ DNIeTM (Digital Natural Image engine) ............................................... Setting the Blue Screen................................................................................. Selecting the Film Mode ................................................................................ Changing the Sound Standard ...................................................................... 25 26 27 28 29 30 30 31 32 33 34 35 35 36 3 ENG Contents (continued) USING YOUR TELEVISION Adjusting the Sound Settings ........................................................................ 37 Adjusting the Volume Automatically .............................................................. 37 Setting the Dolby Pro Logic ........................................................................... 38 Adjusting Your Dolby Preferences................................................................. 39 Setting the External Sound............................................................................ 40 Selecting the Sound Mode (depending on the model) .................................. 41 Setting the Melody Sound ............................................................................. 42 Setting the Sleep Timer ................................................................................. 43 Setting and Displaying the Current Time....................................................... 44 Switching the Television On and Off Automatically ....................................... 45 Viewing an External Signal Source ............................................................... 46 Viewing the Picture In Picture (PIP) .............................................................. 47~48 Listening to the Sound of the Sub Picture (PC or DVI Mode)........................ 49 USING THE TELETEXT FEATURE Teletext Feature ............................................................................................ Displaying the Teletext Information ............................................................... Selecting Display Options.............................................................................. Selecting a Teletext Page.............................................................................. 50 51 52 53 ADDITIONAL INFORMATION AND CONNECTIONS Connecting to the External Input/Output ....................................................... 54 Connecting to the DVD Input......................................................................... 55 Connecting to the Audio Outputs................................................................... 55 Connecting to the Audio/Video Input ............................................................. 56 Connecting to the S-Video Input.................................................................... 56 Connecting to the DVI Input .......................................................................... 57 Connecting to the PC Input ........................................................................... 57 Setting up Your PC Software (Windows only) ............................................... 58 Input Mode (PC/DVI) ..................................................................................... 59 Pin Configurations ......................................................................................... 60 Programming the Remote Control for Other Components ............................ 61 - VCR Remote Control Codes ...................................................................... 62~63 - Cable Box (CATV) Remote Control Codes ................................................ 63 - DVD Remote Control Codes ...................................................................... 63 RECOMMENDATIONS FOR USE Troubleshooting: Before Contacting Service Personnel................................ Technical Specifications ................................................................................ 64 65 Symbols Press Important Note 4 Replacing the Lamp (SP43L2HX/SP50L2HX/SP61L2HX) ENG 1 2 3 Use a screwdriver to remove the screw. Remove the Lamp cover. Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down. When the screws have been completely unfastened, they will still be connected to the body of the Lamp. Separate the Lamp from the engine by holding the handle and pulling it out. To reinstall the Lamp, follow these steps in reverse order. 4 5 is a A Projection TV lamp timeconsumable item, and shouldIfbe replaced from time to for best projector operation. the screen image becomes dark, or timer, lamp and Temp LEDs flicker off at the same time, you may have to replace the lamp. When changing the lamp, you should first verify the type/model, and then use only the correct lamp replacement. The code for lamp regulation and usage is marked on the label. If you remove the lamp, you can identify this replacement code. You should only replace the lamp with the one of the same regulation code. If you wish to buy a new lamp,please phone your Service Center or a nearby TV dealer, and tell them the model of your projection unit. You can identify the lamp type on the left side of TV and the lamp cover. The TV will be damaged if you use a lamp that is different from the original supplied by the manufacturer. Be sure the replacement lamp is the same model. Please don't remove the lamp except when replacing with a new one. Please turn off TV power before changing a lamp and then unplug after waiting 1 minute. The cooling fan will help cool the lamp so you can safely remove it. The surface of the Lamp is very hot. Please wait for 30 minutes after turning off your projection TV to handle the lamp. Please keep the old lamp away from flammable articles and children. Dispose of properly. Don't allow dirt or dust to accumulate inside the lamp cover or on the Lamp. A dirty cover or lamp can catch fire, explode and cause electric shock. Please don't touch the front glass of a new lamp or the glass of the lamp container. If a new lamp is improperly handled,the quality of the screen image can be affected and the expected life span of the lamp can be reduced. Be sure to tighten the lamp cover on the TV after changing the lamp. Note that the TV will not function if the lamp cover is not securely attached. Please tighten the holding screw on the lamp cover after it has been attached to the TV. 5 Replacing the Lamp (SP46L5HX/SP56L5HX) ENG 1 2 3 Use a screwdriver to remove the screw. Remove the Lamp cover. Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down. When the screws have been completely unfastened, they will still be connected to the body of the Lamp. Separate the Lamp from the engine by holding the handle and pulling it out. To reinstall the Lamp, follow these steps in reverse order. 4 5 is a A Projection TV lamp timeconsumable item, and shouldIfbe replaced from time to for best projector operation. the screen image becomes dark, or timer, lamp and Temp LEDs flicker off at the same time, you may have to replace the lamp. When changing the lamp, you should first verify the type/model, and then use only the correct lamp replacement. The code for lamp regulation and usage is marked on the label. If you remove the lamp, you can identify this replacement code. You should only replace the lamp with the one of the same regulation code. If you wish to buy a new lamp,please phone your Service Center or a nearby TV dealer, and tell them the model of your projection unit. You can id ...