Owner's Instructions Before operating the unit, please read this manual throughly, and retain for future reference. FEATURES SAFETY INSTRUCTIONS DESCRIPTION OF PARTS CONTROL PANEL WASHING PROCEDURE Fuzzy course Heavy course Speedy course Wool course Saree course Delay start course MANUAL FUNCTIONS INSTALLATION & MAINTENANCE Environment In case of pump-drained washer Assembling the sound absorbing panel Connecting the drain hose Levelling Connecting the water supply hose Cleaning the magic filter How to add the fabric softener In case of cold-hot water washer How to clean the filter How to put the detergent in How to Assemble the legs TROUBLESHOOTING SPECIFICATIONS 1 2 3 4 5 5 5 5 5 5 6 6 7 7 7 7 7 7 7 8 8 8 8 8 8 FEATURES FUZZY CONTROL Fuzzy control operates with best washing course by sensing the washload like artificial intelligence. TRANSPARENT WINDOW This Transparent Window is the new concept to solve the curiosity of users to see inside of washing machine while operation. While operation, the laundry progress inside of washing machine can be checked by looking through the transparent window. CENTER JET Water shall spout out at the center of barrel of your washing machine, and shall wash your washing thoroughly. WATERFALL FLOW The Waterfall Flow injected from under the pulsator cascades with full force back into the tub, pushing down any clothes that float right under the water surface. It is this Waterfall Flow that enables this washing machine to effectively wash large and heavy items, such as bluejeans and blankets. MAGIC FILTER This unique magic Filter ensures that all the lint inside the tub is captured for top quality filtering results to deliver consistently effective cleaning results. SOFTENER DISPENSER The Softener Dispenser releases the fabric softener at the appropriate time when the last rinsing proceeds. 1 SAFETY INSTRUCTIONS WARNING! To reduce the risk of fire, electric shock, or injury to persons when using your appliance, take care to adhere to the following precautions. Where an unearthed power cord is not fitted, be sure that the washer is grounded. To avoid electrical shock use metal piping for the ground connection. Take care not to ground the washer to gas pipes or telephone cables due to the danger of explosion from lightning strikes. Place clothes evenly into the washer as unevenly distributed laundry may cause excessive out-of-balance noise and vibration. Don't use excessively hot water. Plastic parts may be deformed or damaged. Also, clothing may be deformed or bleached. Before washing, check all pockets. During spinning, don't put your hand in the spin basket. Because the spin basket is rotating at the high speed, rotating parts may injure your hand. If nails or pins remain in pockets, they may damage the washer or clothes. Don't press the control panel with a sharp object. Panel damaged or malfunction may occur. If the control panel for this washer is damaged, it must be replaced by a repair shop appointed by the manufacturer, as special purpose tools are required. Openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. Turn off water taps when the washer is not in use to avoid water pressure damage to the pump. To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similary qualified person in order to avoid a hazard. Do not operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The instructions for use shall specify the maximum mass or dry cloth in kg, for which the appliance is designed. If the appliance is supplied from a cord extension set or electrical portable outlet device the cord extension set or electrical portable outlet device should be positioned so it is not subject to splashing or ingress of moisture. 2 DESCRIPTION OF PARTS LID Be sure to keep the lid closed during washing and spinning. WATER SUPPLY HOSE(HOT) WATER SUPPLY HOSE (COLD) DRAIN-HOSE (PUMP) FABRIC SOFTENER DISPENSER SPIN BASKET Stainless BLEACH INLET "CENTER-JET" PULSATOR POWER CORD MAGIC FILTER Lint will be collected in the filter during washing. SOUND ABSORPTION PANEL FRONT CONTROL PANEL GROUND LEAD When the water pipe is metal, make sure to cover the end of the ground wire. ADJUSTABLE LEGS Adjust the length of the legs when installing the washer. WATER DRAIN HOSE 3 CONTROL PANEL 1. 2. POWER BUTTON Press this button once to operate. Press once again to turn the washer off. 6. WATER LEVEL SELECT BUTTON According to the washload,select the water level ; MEDIUM¡HIGH¡EXTRA LOW¡LOW START/HOLD BUTTON Use to pause and restart the operation. To change the washing procedure during operation, press this button to stop, and once again to restart after changing the procedure. 7. WATER SUPPLY SELECT BUTTON As you press this button, the type of water is selected as follows. COLD¡COLD+HOT¡HOT¡COLD 3. 4. DELAY START BUTTON Press this button when delay start washing is needed. 8. REMAINING TIME INDICATOR LIGHT The indicator light shows the remaining time (in minutes) of each wash cycle. At the end of the cycle,the power automatically switches off. COURSE SELECT BUTTON With every press of this button, the washing course changes; FUZZY¡HEAVY¡SPEEDY¡WOOL¡SAREE¡FUZZY 9. FUNCTION INDICATOR LIGHT The function in use indicator shows the current function as a flashing symbol. The light goes out at the end of the function. 5. FUNCTION SELECT BUTTON With every press of this button, the function changes; SOAK,WASH,RINSE,SPIN¡WASH ¡RINSE¡SPIN¡ WASH&RINSE¡RINSE&SPIN¡WASH,RINSE,SPIN 4 WASHING PROCEDURE Before starting washing, check the following; Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose.(In case no drain pump) Put the laundry into the washer and add detergent,too. Be careful not to overload. Use right detergent for the fabrics you are washing. FUZZY COURSE Selects the best washing course automatically. 1. Press the POWER Button to"ON". POWER HEAVY COURSE 1.Press the power button to "ON". POWER 2. Press the course select button once. 2. Press the START/HOLD button. Water level is selected automatically. Washing,rinsing, and spinning follow. If you want to pause, press the START/HOLD button again.You can change the course when paused. 3. Press the START/HOLD button Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again.You can change the course when paused. START/HOLD START/HOLD 3. Close the lid. 4. Close the lid. washing is it is SPEEDY COURSE Becauselight or less speedy,laundry. good for stained WOOL COURSE Extra low water level is not available. Cold water is selected. 1.Press the power button to "ON". POWER 1.Press the power button to "ON". POWER 2.Press the course select three times. 2. Press the course select button twice. 3.Press the START/HOLD button. Washing,rinsing, and spinning follow. 3. Press the START/HOLD button Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again.You can change the course when paused. If you want to pause, press the START/HOLD button again.You can change the course when paused. START/HOLD 4. Close the lid. CAUTION . . . -Do not use water above 30 for WOOL washing. -Refer to the tag attached on the clothes for washing information. -Fasten buttons and turn inside out before washing. -Use the detergent indicated in the laundry. -When the degree of dirt is extreme, soak the laundry in warm water for about 10 minutes before pressing the WOOL course button in order to enhance washing efficiency. START/HOLD 4. Close the lid. 5 SAREE COURSE Select this course when you have to go out or do something else. DELAY START COURSE Select this course when 1.Press the power button to "ON". you have to go out or do something else. 1.Press the power button to "ON". 2. Press the course select button once. POWER 2. Press the DELAY START select button twice. D POWER 3. Press the START/HOLD button Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again. You can change the course when paused. START/HOLD DELAY START You may change the delay start time with use the DELAY START button. (from 3 hours to 18 hours) 3. Press the START/HOLD button and put the proper amount of detergent into tub. START/HOLD 4. Close the lid. Suitable number of Saree for laundering is three to five. 4. Close the lid. The washing finishes by the time you reserved. MANUAL FUNCTIONS FUNCTION SOAK FUNCTION(Including WASH, RINSE, SPIN) Press the POWER button. Select the course(Press the course button). ¡FUZZY, HEAVY, SPEEDY, WOOL., SAREE Press the FUNCTION SELECT button once. Press the START/HOLD button once. Water level is selected automatically. Washing,rinsing, and spinning follow. Course Button Function Button BUTTON once WASH ONLY Press the POWER button. Press the FUNCTION SELECT button twice. Press the START/HOLD button once. Washing goes on for 18 minutes. When the FUNCTION button is pressed during washing, he wash time can be changed to between 3 and 25 minutes in duration. Function Button twice RINSE ONLY Press the FUNCTION button three times. Press the START/HOLD button once. Rinsing goes on for 15 minutes. When the FUNCTION button is pressed during rinsing, the rinse times can be changed to between 1 and 5 times in duration. Function Button three times SPIN ONLY Press the FUNCTION button four times. Press the START/HOLD button once. Spin drying goes on for 9 minutes. When the FUNCTION button is pressed during spinning, the spin time can be changed to from 5 to 11 minutes. Function Button four times WASH AND RINSE Press the FUNCTION button five times. Press the START/HOLD button once. Washing and rinsing go on for 38 minutes. When the FUNCTION button is pressed during working, the rinse times can be changed to between 1 and 5 times in duration. Function Button five times RINSE AND SPIN Press the FUNCTION button six times. Press the START/HOLD button once. Rinsing and spin drying follow. When the FUNCTION button is pressed during working, the rinse times can be changed to between 1 and 5 times in duration. Function Button six times 6 INSTALLATION & MAINTENANCE ENVIRONMENT Leave some space Maintain at least 10cm between the washer and the wall. ASSEMBLING THE SOUND ABSORBING PANEL Tilt the washer a little and lift up the panel until it clicks, filnaly fix the panel with screw to the base as shown in the figure. Rear-side Place the washer on a sturdy flat surface. If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1 ) Adjust the legs for even placement. Never install the washer near water. Do not place the washer in steamy rooms or where the washer is directly exposed to rain.Moisture may destroy the electrical insulation causing an electrical shock hazard. CONNECTING THE DRAIN HOSE After pressing the joint ring(a), insert the drain hose(b) to drain direction. (a) Avoid direct sunlight or heaters. As plastic and electrical components are affected by direct heat,never place the washer near furnaces, boilers,etc.Do not place under direct sunlight. IN CASE OF PUMP-DRAINED WASHER qTake out the q Be sure to join tightly q Install the drain (b) LEVELLING SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING THE POSITION OF THE WASHING TUB. q Open the lid of the machine, pour water into the tub up to the level just below the pulsator, and adjust the legs so that the pulsator is positioned at the center of the water as shown in the figure. q Place the machine more than 10cm away from the wall. cap-hose and connect the outlet-hose. the drain hose into the hose in the position drain-outlet on theback of about 70~80cm of the machine. above the ground. cap-hose outlet-hose 70~80cm q Adjust the legs on feet for levelling . Loosen Lock CONNECTING THE WATER SUPPLY HOSE 1.Remove the adaptor from the water supply hose. 4.Connect the water supply hose to the adaptor. Pull down the part (c) of the water supply hose .When the part (c)is released, the hose is automatically connected to the adapto ...