User manual SANYO DP32746 - CONNECTION GUIDE

HIGH-DEFINITION TELEVISION AS THEIR FUNCTION Carries off-air digital broadcast signals (channels) from an antenna to the DTV. For the ultimate resolution of local High-Definition off-air broadcasts. COMMON CONNECTORS SIGNALS VS IMAGE DEFINITION CABLES & CONNECTORS 75 OHM COAX ( DIGITAL RF) AVAILABLE SIGNALS 480i, 480p, 720p, or 1080i digital signals (depends on the broadcast signal). *(Sanyo HDTVs convert 480i, 480p, 720p, and 1080i signals to their native format [720p or 1080i] for display.) 480i, 480p, 720p, or 1080i digital signals (depends on the output device and/or your subscription service). *(Sanyo HDTVs convert 480i, 480p, 720p, and 1080i signals to their native format [720p or 1080i] for display.) 480i, 480p, 720p, or 1080i digital video signals (depends on the output device and/or your subscription service). *(Sanyo HDTVs convert 480i, 480p, 720p, and 1080i signals to their native format [720p or 1080i] for display.) Multi-channel audio, such as, 5.1 channels of surround sound, when received as part of the original signal. PIX-O-METER ULTIMATE -- -- -- -- -- -- -- -- -- -- -- -- -- -- EXCEPTIONAL -- DIGITAL HDMI Uses just one cable to transfer full-bandwidth digital video and 5.1 channels of audio, when available, for the ultimate in picture resolution and sound quality. These signals may be output by a Satellite Receiver, Digital Cable Box, DVD Player, or other compatible digital equipment to the HDTV. Transfers full-bandwidth digital video for the ultimate resolution from a Satellite Receiver, Digital Cable Box, DVD Player, or other compatible digital equipment to the HDTV. (Connect it to the HDTV's HDMI jack using an adapter [not supplied]. Separate analog audio connections are required.) DVI ( Plus RCA) FIBER OPTICS Used to transfer digital audio signals (in the form of light pulses). This signal is available for output from the HDTV to a multi-channel receiver only when received as part of the digital antenna signal or when received through the HDMI jack from an HDMI source. COMPONENT Y Pb Pr Pb (Plus RCA) Transfers individual Green Blue and Red analog signals for Green, Blue, exceptional resolution. These signals may be output by a Satellite Receiver, Digital Cable Box, DVD Player, or other compatible equipment to the HDTV. (Separate analog audio connections are required.) 480i, 480p, 720p, or 1080i analog signals (depends on the output device and/or your subscription service). *(Sanyo HDTVs convert 480i, 480p, 720p, and 1080i signals to their native format [720p or 1080i] for display.) 480i (standard analog) *(Sanyo HDTVs convert 480i signals to their native format [720p or 1080i] for display.) 480i (standard analog) *(Sanyo HDTVs convert 480i signals to their native format [720p or 1080i] for display.) -- -- ANALOG B ETT ER ETTER -- -- -- -- -- -- GOOD IMAGE DEFINITION DEFINITIO N S-VIDEO ( Plus RCA) © 2006 Sanyo Manufacturing Corporation Transfers separated analog luminance and chroma signals from a VCR or similar device to the TV for better picture resolution. Due to severe HD resolution limitations, Sanyo recommends strongly that you not use this option to connect HD equipment to your Sanyo HDTV. (Separate analog audio connections are required.) COMPOSITE ( RCA ) RCA) Transfers a composite analog luminance and chroma signal (yellow connector) from a VCR, or similar device, to the TV (left and right audio signals are carried by the white and red connectors respectively). Due to severe resolution limitations, Sanyo recommends strongly that you not use this option to connect HD equipment to your Sanyo HDTV. *Conversion of 480i, 480p, 720p, and 1080i signals to native display formats does not increase nor decrease the resolution. The maximum resolution the HDTV can display depends on the input signal. EQUIPMENTTODTV CONNECTOR CROSSREFERENCE CHART EXTERNAL YOUR SANYO HIGH-DEFINITION DT V HAS THESE CONNECTORS S-VIDEO* COMPOSITE COMPONENT COMPONENT* S-VIDEO COMPOSITE* DIGITAL EQUIPMENT EQUIPMENT & DIGITAL RF HDMI (DVI* equipment can be STEREO connected using an adapter.) TERMINAL AUDIO OUT OUT ANTENNAS ANTENNAS YOU MAY HAVE DVI to HDMI Cable USE THE BEST CONNECTION AVAILABLE USE THE BEST CONNECTION AVAILABLE ANTENNA Digital Analog Yes1 No Yes No BROADCAST SIGNAL SOURCES DIGITAL CABLE HD Receiver Standard Receiver SATELLITE HD Receiver Standard Receiver ANALOG CABLE With Box Without Box or No No Yes3 No Yes Yes Yes3 Yes3 Yes ** or Yes2 No Yes Yes3 ** or Yes2 No Yes Yes3 OTHER SIGNAL SOURCES DVD PLAYER/RECORDER DVR GAME CONSOLE VCR MULTICHANNEL 5.1 AV RECEIVER Audio Output to the AV Receiver instead. ** ** or or When using an AV Receiver, connect the Digital Audio Out from your external equipment, when available, to the Digital Audio In on your AV Receiver. NOTE: When the HDMI output of your external device is connected to the DTV HDMI jack, connect the DTV Digital Yes2 Yes2 Yes2 No Yes1,2 DIGITAL ANALOG IMAGE DEFINITION ULTIMATE 1 2 3 EXCEPTIONAL BETTER GOOD The maximum number of video connections is four (HDMI, Component x2, and S-Video or Composite), plus two RF. * Requires separate analog audio connections. ** This hook-up will reproduce significantly lower resolution, and is therefore, not recommended by Sanyo for this device. When received as part of the digital antenna signal. With HDMI connection (excluding DVI) and when received as part of the digital signal. Mono only with analog RF input. Color-Coding The charts and connection diagrams in this guide are color-coded for easy identification. For the Ultimate picture resolution, choose a Green connection option for your HD equipment. When these connectors are not available, Gold is an Exceptional alternative. Green and Gold options both provide High-Definition reception when the signal contains HighDefinition content. The signal makes the difference! Page 2 DP32746 EXTERNAL HD CONNECTIONS THE ULTIMATE DEFINITION HDMITOHDMI & OPTICAL DIGITAL AUDIO EXCEPTIONAL DEFINITION S-VIDEO Y V I D E O Pb VIDEO Pr HDMI CONNECTION DIGITAL AUDIO CONNECTION A U D I O (MONO) L L L R R R AUDIO OUTPUT DTV BACK CENTER HDMI INPUT DIGITAL AUDIO OUTPUT Cables are not supplied. COMPONENT CONNECTIONS VIDEO2 VIDEO1 VIDEO2 VIDEO3 COMPONENT CONNECTIONS VIDEO3 DTV BACK CENTER THE ULTIMATE DEFINITION HDMITODVI HDMI TO DVI ADAPTER CABLE When using HDMI to connect your DVI device, an adapter or adapter cable is required. Color-Coding The charts and connection diagrams in this guide are color-coded for easy identification. For the U ltimate picture resolution, choose a Green connection option for your HD equipment. When these connectors are not available, Gold is an Exceptional alternative. NOTE: VIDEO3 audio jacks are used to receive the audio. Therefore, VIDEO3 video jacks cannot be used with a DVI hook-up. S-VIDEO Y V I D E O Pb VIDEO Pr (MONO) Green and Gold options both provide High-Definition reception when the signal contains High-Definition content. HDMI INPUT DIGITAL AUDIO OUTPUT DIGITAL ANTENNA IN UHF/VHF/CATV A U D I O L L R R AUDIO VIDEO3 OUTPUT The signal makes the difference! DVI AUDIO CONNECTION VIDEO1 VIDEO2 HDMI INPUT DIGITAL AUDIO OUTPUT DIGITAL ANTENNA IN UHF/VHF/CATV Page 3