NYC8010MS_QSG_ENG_MP_0519 5/19/04 8:57 AM Page 1 1 CONNECTING DEW CAUTION Condensation can form inside the DVD+VCR when it is suddenly moved from a cold place to a warm or humid environment.In any such circumstance do not use this DVD+VCR 1-1/2 to 2 hours allowing complete elimination of any condensation. 2 Setting the RF Output Channel and Auto Channel Programming DVD/VCR select button Select the output source (DVD or VCR) to view on the TV screen. To use a VCR, first press VCR. To use a DVD, first press DVD. SETUP 1 Press appear. MENU and the MAIN menu v/V the TUNING 2 Presspress to select will appear. menu, then SELECT/ENTER. The TUNING menu SOURCE 3 Press V to choose thepress b/B to SELECT option, then Setting the RF output channel When the DVD+VCR is turned off, press and hold CHANNEL (V/v) on the front panel for more then five seconds to change the RF output channel (CH03 or CH04). "RF 03" or "RF 04" appears in the display window. ANTENNA INPUT AUDIO INPUT VIDEO INPUT select TUNER. Press b/B repeatedly to switch among TUNER, LINE1 and LINE2. v/V choose the AUTO CHANNEL 4 Pressoption,tothen press b/B to set the SET channel. The tuner will automatically cycle through all available channels (TV/CATV) in the area and place them in the tuner's memory. After the AUTO CHANNEL SET PROCEEDING is complete, the TUNING menu will hide and return to the TV screen automatically. L R When using the Audio/Video cable, set your TV to the VIDEO mode using the TV/VIDEO button on your TV. Audio input RF Cable Audio Cable Video input Video Cable Audio out Video out TUNING BAND 5 Make sure the(TV or CATV). is set appropriately Inserting The Batteries Your REMOTE CONTROL HANDSET is powered by two AAA type batteries. 1. To insert them, push the tab backwards and lift off the cover of the handset. 2. Put the two batteries into the compartment making sure the + and - are correctly positioned. 3. Replace the cover. · TV : If you are using a standard antenna to receive channels. CATV : If you are using basic cable to receive channels. · Change the setting of TUNING BAND to check the TV channels. CH/TRK (v/V) on 6 Useor CHANNEL (V/v)the remote control on the front panel to cycle the DVD+VCR through the channels in memory. AAA AAA NYC8010MS_QSG_ENG_MP_0519 5/19/04 8:57 AM Page 2 3 Setting the Clock Press V to choose the TIME ZONE item. 5 Press b/B to choose the correct time zone Auto Clock Set The Auto Clock Set feature is set to ON at the factory. In the ON setting, the DVD+VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. The Auto Clock Feature enables the DVD+VCR to set up the clock when the DVD+VCR is turned off. 1 v/V to choose the CLOCK menu. Press 2 Press SELECT/ENTER and the CLOCK menu will appear. Press MENU and the MAIN menu will appear. AUTO 3 Press V to choose theON. CLOCK SET option. Press b/B to choose The Auto Clock Set works for seting up the clock when the DVD+VCR is turned off. Press 4 item. V to choose the DAYLIGHT SAVINGS 6 Turn off the DVD+VCR and the auto clock setting 7 works. ote There are cases where the TV station does not send or sends wrong date and/or time information and the DVD+VCR sets the incorrect time. If this happens we recommend that you set the clock manually. (AUTO, EASTERN, CENTRAL, MOUNTAIN, PACIFIC, ALASKA, or HAWAII). If "AUTO" is selected as the time zone, the VCR sets the clock using the first Coordinated Universal Time information when it finds in a broadcast signal. Press MENU when finished. Quick start guide DVD Player + Video Cassette Recorder DVW-7100 Thank you for buying Sanyo. This guide will enable the quick and easy setup of your new DVD+VCR, simply follow the procedures inside. For further details of features, please refer to the instruction manual. Press b/B to choose AUTO, ON, or OFF. If you choose AUTO, the VCR sets the clock using the DST information broadcast in the signal (channel). If you choose ON, the VCR sets the clock when the Daylight Saving Time is started and ended. Is Everything In The Box? DVW-7100 P/NO : (8)3840R-Q005J (1E05/04 A) Printed in China ...