Multimedia Projector MODEL PLC-XP21N PLC-XP18N Owner's Manual INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause har mful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. TO THE OWNER As the owner of a new Multi-media Projector, you are probably eager to try out your new projector. Before you do, we suggest that you spend a little time reading this manual to familiarize yourself with the operating procedures, so that you will receive maximum satisfaction from the many features included in your new projector. This owner's manual will acquaint you with your projector's features. Reading it will help us too. Through the years, we have found that many service requests were not caused by problems with our projectors. They were caused by problems that could have been prevented, if the owner had followed the instructions in the manual. You can often correct operating problems yourself. If your projector fails to work properly, see "TROUBLESHOOTING" section on pages 51 ~ 52 and try the solutions marked for each problem. SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This Projector has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. This projector produces intense light from the projection lens. Do not stare directly into the lens as possible eye damage could result. Be especially careful that children do not stare directly into the beam. The Remote Control Unit, supplied to this projector, emits the laser beam as the Laser Pointer function from the Laser Light Window while pressing the LASER button (for 1 minute). Do not look into the Laser Light Window or shine the laser beam on yourself or other people. Eye damage may result. This projector should be set in the way indicated. If not, it may result in fire hazard. If the Projector will not be used for an extended time, unplug the new Projector from the power outlet. READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT. 2 IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the manufacturer as they may cause hazards. Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturer. Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc... Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating. The openings should never be covered with cloth or other material, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register. This projector should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it. Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector. Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions: a. b. c. d. When the power cord or plug is damaged or frayed. If liquid has been spilled into the projector. If the projector has been exposed to rain or water. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation. e. If the projector has been dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition. This projector is equipped with a grounding type AC line plug. Should you be unable to insert the plug into the outlet, contact your electrician. Do not defeat the safety purpose of this grounding type plug. GROUND Follow all warnings and instructions marked on the projectors. For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and powerline surges. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. If the projector is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. 20cm WALL PROJECTOR (FRONT) 50cm PROJECTOR (SIDE) 50cm 50cm 3 TABLE OF CONTENTS PAGE PAGE MENU OPERATION MODE SELECT SOUND ADJUSTMENT LANGUAGE ADJUSTMENT 30-31 30 31 31 FEATURES AND DESIGN COMPATIBILITY IMAGE RESOLUTION AUTOMATIC MULTISCANNING SYSTEM MULTILANGUAGE MENU DISPLAY LASER POINTER FUNCTION OTHER FEATURES UNPACKING THE PROJECTOR TRADEMARKS 5 5 5 5 5 5 5 5 5 VIDEO MODE COLOR SYSTEM SELECT VIDEO SOURCE SELECT PICTURE IMAGE ADJUSTMENT PICTURE SCREEN ADJUSTMENT 32-35 32 33 34 35 INSTALLATION NAME OF EACH PART OF THE PROJECTOR SETTING-UP THE PROJECTOR MOVING THE PROJECTOR POWER REQUIREMENTS 6-9 6 7 8 9 COMPUTER MODE COMPUTER SYSTEM SELECT COMPATIBLE COMPUTER SPECIFICATIONS AUTO IMAGE FUNCTION PICTURE IMAGE ADJUSTMENT PICTURE POSITION ADJUSTMENT PC ADJUSTMENT PICTURE SCREEN ADJUSTMENT 36-48 36 37 38 39 40 41-44 45 CONNECTING THE PROJECTOR TERMINAL OF THE PROJECTOR CONNECTING THE COMPUTER CONNECTING THE VIDEO EQUIPMENT 10-18 10 11-15 16-18 OTHER FUNCTION SETTING BLUE BACK DISPLAY CEILING REAR SPLIT WIPE POWER MANAGEMENT REMOTE CONTROL (Mode 1 or Mode 2) LAMP AGE 46-48 46-47 46-47 46-47 46-47 46-47 46-47 46-47 48 BEFORE OPERATION CONTROLS AND INDICATORS OPERATION OF THE REMOTE CONTROL CONTROL THE PROJECTOR DIRECT OPERATION MENU OPERATION 19-26 19-20 21-23 24-26 24 25-26 BASIC OPERATION TURNING ON/OFF THE PROJECTOR DIRECT OPERATION MODE SELECT SOUND VOLUME ADJUSTMENT SOUND MUTE FUNCTION ZOOM ADJUSTMENT FOCUS ADJUSTMENT DIGITAL ZOOM FUNCTION KEYSTONE FUNCTION NO SHOW FUNCTION FREEZE PICTURE FUNCTION AUTO IMAGE FUNCTION NORMAL PICTURE FUNCTION P-TIMER FUNCTION 27-31 27 27-29 27 28 28 28 28 28 28 29 29 29 29 29 APPENDIX MAINTENANCE TEMPERATURE WARNING INDICATOR AIR FILTER CARE AND CLEANING LAMP REPLACEMENT CLEANING THE LENS TROUBLESHOOTING TECHNICAL SPECIFICATIONS 49-53 49-51 49 49 50 51 51-52 53 4 FEATURES AND DESIGN The projector is a multimedia projector that combines powerful and sophisticated features with easy-to-use, intuitive controls. Built-in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology. The projector is ideal for high-performance business, training and imaging applications that demand exceptional color quality. COMPATIBILITY The projector is compatible with many different types of personal computers and video devices, including: q IBM-compatible computers, including laptops, up to 1280 x 1024 resolution. q Apple Macintosh and PowerBook computers up to 1280 x 1024 resolution. q Various VCRs, video disc players, video cameras, DVD players, satellite TV tuners or other AV equipment using any of the worldwide video standards, including NTSC, NTSC4.43, PAL, PAL-M, PAL-N and SECAM. OTHER FEATURES This projector has Motor Zoom/Focus, No Show, Picture Freeze, Keystone, Mute Functions. UNPACKING THE PROJECTOR The projector comes with the parts listed below. Check to find all the parts are included. If any parts are missing, contact an authorized dealer or service station. q Owner's Manual. q AC Power Cord. q Remote Control Unit. q Batteries for Remote Control Units. q VGA Cable. q Mouse Cable for PS/2 port. q Mouse Cable for serial port. q Mouse Cable for ADB port. q VGA/MAC Adapter. q Protective Dust Cover. q Lens Cover. IMAGE RESOLUTION The resolution of the projector's projected image is 1024 x 768. The projector displays computer images just as they appear on your computer's monitor. Screen resolutions between 1024 x 768 and 1280 x 1024 are compressed to 1024 x 768. The projector cannot display screen resolutions above 1280 x 1024. If your computer's screen resolution is higher than 1280 x 1024, reset it to a lower resolution before you connect the projector. TRADEMARKS q Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. q IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. q Windows is a trademarks or registered trademarks of Microsoft Corporation. q Other trademarks are the property of their respective owners AUTOMATIC MULTISCANNING SYSTEM This projector can detect display signals from most personal computers currently distributed. It is free from complicated adjustments to project picture images from PC. MULTILANGUAGE MENU DISPLAY MENU DISPLAY is displayed with ; English, German, French, Italian, Spanish and Japanese. LASER POINTER FUNCTION The Remote Control Unit of this projector includes the Laser Pointer function providing the ability to point and highlight during presentations. 5 INSTALLATION NAME OF EACH PART OF THE PROJECTOR FRONT OF THE PROJECTOR PROJECTION LENS FEET LOCK LATCH INFRARED REMOTE RECEIVER AIR INTAKE VENT REMOVABLE LENS COVER SPEAKERS FEET LOCK LATCH REAR OF THE PROJECTOR EXHAUST VENT INFRARED REMOTE RECEIVER CAUTION HOT AIR! Air blown from the exhaust vent is hot. Observe the following when handling your projector or choosing a location to install it. q Keep heat-sensitive objects away from the exhaust port. q If you set the projector on top of a metallic surface, the surface will become hot because of the hot air exhaust. Be careful when handling. q Do not touch the cabinet near to the exhaust vent area, and especially screws and metallic parts. These parts will become hot while the projector is used. CARRYING HANDLE MAIN ON/OFF SWITCH POWE ...