Multimedia Projector MODEL PLV-Z5 PLV-Z5BK Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. It uses built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. Short Throw & Wide-Range Zoom Lens The 2x Short Throw & Wide-Range Zoom Lens is capable of throwing a 100" diagonal image from a distance of 9.8' (3.0 m) to 20.0' (6.1 m). Automatic Slide Shutter The automatic slide shutter protects the lens from dust and scratches. It opens and closes automatically as you press the POWER ON/STAND-BY button. Lens Shift The Lens Shift function provides a greater installation flexibility. You can use the projector at desired places without images being distorted (see page 15). Wide Selection of Image Modes You can select an ideal image mode for the viewing environment or for your desired picture quality (see page 27). The four different kinds of images of your choice can also be stored (see pages 28 ­ 32). Color Management The Color management function allows you to adjust the details of picture colors to suit your preference and viewing environments (see pages 31 ­ 32). Power Management The Power management function reduces power consumption and maintains the lamp life (see page 39). Twin Iris The integration of the lens aperture and lamp aperture enhances the contrast and depth of the projected image. Logo The Logo function allows you to customize the screen logo (see page 38). You can capture an image for the screen logo and use it for the starting-up display or between presentations. Compatibility The projector accepts signals from multiple sources: computers, analog TV systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N), component video, S-video, RGB scart, and HDMI. Lamp Control The brightness of the projection lamp can be selected (see pages 22, 29). Simple Computer System Setting The Multi-scan system of the projector conforms to almost all computer output signals quickly (see page 26). Multi-language Menu Display Operation menu is available in 16 languages: English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese (see page 36). 16 : 9 Wide Screen The wide LCD panels with 1280 x 720 resolution (16:9 aspect ratio) can project the image from component video signals such as DVD players and HDTV devices in full screen. Selectable Setting Position The Mounting function provides a proper image position (up/down and left/right) depending on the setting position of the projector such as ceiling mounting or wall-hanging (see page 37). Interlace-Progressive Conversion High-quality picture technology is available that converts an interlaced signal into a progressively-scanned one (see page 29). Two HDMI Terminals The projector has two HDMI (High Definition Multimedia Interface) terminals. Simple connection with digital equipment is offered through these terminals. Notes: · The On-Screen Menu and figures in this manual may differ slightly from the actual product. · The contents of this manual are subject to change without notice. 2 Table of Contents Features and Design . . . . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . 3 To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Instructions . . . . . . . . . . . . . . . . . . . . 5 Air Circulation Installing the Projector in Proper Position Moving the Projector 6 6 6 Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Input Source and System Selection 24 Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Image Mode Selection 27 Image Adjustment . . . . . . . . . . . . . . . . . . . 28 Image Mode Adjustment 28 Picture Adjustment . . . . . . . . . . . . . . . . . . 33 Picture Position and Screen Adjustment 33 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Part Names and Functions . . . . . . . . . . . . . . 8 Front Back Bottom Rear Terminal Top Control Remote Control Remote Control Operating Range Remote Control Battery Installation 8 8 8 9 10 11 12 12 Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Screen Size Adjustment 34 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Setting 36 Information . . . . . . . . . . . . . . . . . . . . . . . . . .41 Input Source Information Display 41 Maintenance and Cleaning . . . . . . . . . . . . 42 Warning Indicator Cleaning the RGB panels Cleaning the Air Filters Cleaning the Projection Lens Cleaning the Projector Cabinet Lamp Replacement Lamp Replacement Counter 42 43 45 46 46 47 48 Installation . . . . . . . . . . . . . . . . . . . . . . . . . 13 Positioning the Projector Adjustable Feet Connecting the AC Power Cord Moving the Lens Connecting to Video Equipment (Video, S-Video) Connecting to Video Equipment (Component) Connecting to a Computer 13 13 14 15 16 16 17 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Troubleshooting Indicators and Projector Condition Menu Tree System Mode Chart Technical Specifications Configurations of Terminals Optional Parts Dimensions 49 50 51 53 54 55 55 56 Connecting to Video Equipment (HDMI, RGB Scart) 17 Basic Operation . . . . . . . . . . . . . . . . . . . . . 18 Turning On the Projector Turning Off the Projector How to Operate the On-Screen Menu Menu and its Functions Zoom and Focus Adjustment Remote Control Operation 18 19 20 21 22 22 TRADEMARKS Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. Each name of corporations or products in this owner's manual is either a trademark or a registered trademark of its respective corporation. 3 To the Owner Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. Safety Precaution WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ­ This projector produces intense light from the projection lens. Avoid staring directly into the lens as much as possible, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam. ­ Install the projector in a proper position. Otherwise it may result in fire hazard. ­ Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimensions shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained. ­ Do not cover the ventilation slot on the projector. Heat buildup can reduce the service life of your projector, and can also be dangerous. SIDE and TOP 1.5' (50 cm) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT. REAR 3' (1 m) 1.5' (50 cm) 1.5' (50 cm) ­ If the projector is unused for an extended time, unplug the projector from the power outlet. CAUTION ON HANGING FROM THE CEILING When hanging the projector from the ceiling, clean the air intake vents, air filters, and the top of the projector periodically with a vacuum cleaner. If you leave the projector unclean for a long time, the cooling fans can be clogged with dust, and it may cause a breakdown or a disaster. DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED. NOTE: This symbol and recycle system are applied to EU countries only and not to the countries in the other area of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in! CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. Ne peut être utilisé dans une salle d'ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment. READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. 4 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection to the projector during lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges. This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it. Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation. e. If the projector has been dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance, this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition. Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc... Do not use attachments not recommended by the manufacturer as they may cause hazards. Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating. The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register. This projector should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector. Do not install the projector near the ventilation duct of airconditioning equipment. Voor de klanten in Nederland Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. NL 5 Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. Installing the Projector in Proper Position Install the projector properly. Improper installation may reduce the lamp life and cause fire hazard. 20° CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. ­ Do not put any flammable objects or spray can near the projector. Hot air is exhausted from the ventilation holes. ­ Keep the exhaust vent at least 3' (1 m) away from any objects. ­ Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used. ­ Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also cause fire hazard by heat. Cooling fans are provided to cool down the projector. The fan's running speed is changed according to the temperature inside the projector. Do not tilt the projector more than 20 degrees from side to side. 20° Do not point the projector down to project an image. NO DOWNWARD Do not put the projector on either side to project an image. NO SIDEWARD Moving the Projector When moving the projector, make sure that the automatic slide shutter is closed, retract the adjustable feet, and lock the lens with the Lens Shift Lock to prevent damage to the lens and cabinet. When the projector is unused for an extended period, put it into a suitable case. Care must be taken when handling the projector; do not drop, bump, subject it to strong forces, or put other things on the cabinet. CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR Air Intake Vents Exhaust Vent (Hot air exhaust) ­ Do not drop or bump the projector, otherwise damages or malfunctions may result. ­ When carrying the projector, use a suitable carrying case. ­ Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer. ­ Do not put the projector in a case before it is cooled enough. 6 Compliance Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number(s) Trade Name Responsible party Address Telephone No. : PLV-Z5, PLV-Z5BK : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician. GROUND AC Power Cord for the United Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted. ASA WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET. The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow ············ Earth Blue ································· Neutral Brown ······························ Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. WARNING: THIS APPARATUS MUST BE EARTHED. THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE. 7 Part Names and Functions Front q Air flow q Exhaust Vent CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. w Top Controls and Indicators e r t y Automatic Slide Shutter Projection Lens Focus Ring Zoom Lever u Infrared Remote Receiver i Vertical Lens Shift Ring (Up/Down) o Horizontal Lens Shift Ring (Left/Right) !0 Lens Shift Lock w e r ty u io !0 Back !1 !1 !2 !3 !4 SERVICEPORT S-VIDEO COMPONENT 1 HDMI 1 HDMI 2 COMPUTER VIDEO Y Pb/Cb Pr/Cr COMPONENT 2 Terminals and Connectors Power Cord Connector Main On/Off Switch Air Intake Vents/Air Filters Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands Corporation. !2 !3 !4 Bottom !5 !5 Adjustable Feet !6 Lamp Cover !7 RGB Panel Cleaning Hole Cover !6 !7 8 Part Names and Functions Rear Terminal q we r S-VIDEO COMPONENT 1 HDMI 1 HDMI 2 COMPUTER VIDEO Y Pb/Cb Pr/Cr COMPONENT 2 SERVICEPORT t y q COMPUTER Connect the computer output signal, or RGB Scart 21pin video output to this connector (p.17). r SERVICE PORT This jack is used to service the projector. t HDMI 1/HDMI 2* Connect the HDMI output signal from video equipment to these terminals (p.17). w S-VIDEO Connect the S-Video output signal from video equipment to this jack (p.16). e COMPONENT 1 or COMPONENT 2 Connect the component video output signal to these jacks (p.16). y VIDEO Connect the composite video output signal from video equipment to this jack (p.16). *Note on the HDMI connector: Use the HDMI connector less than the size shown below. Otherwise you cannot connect use HDMI 1 and HDMI 2 terminals at the same time. Maximum dimensions of the HDMI connectors 0.94" (24 mm) 0.59" (15 mm) WIDTH THICKNESS 9 Part Names and Functions Top Control r e w q t y ui q POWER ON/STAND-BY button Turn the projector on or off (pp.18, 19). w POWER indicator ­ Lights red while the projector is in stand-by mode. ­ Lights green during operations. ­ Blinks red during the cooling-off period. ­ Blinks green in the Power management mode (p.39). ­ Blinks orange when the automatic slide shutter is closed during operations (p.50). e WARNING indicator ­ Lights red light when the projector detects an abnormal condition. ­ Blinks red when the internal temperature of the projector exceeds the operating range (pp.42, 50). r LAMP REPLACE indicator Lights yellow light when the projection lamp reaches its end of life (pp.47, 50). t MENU button Open or close the On-Screen Menu (p.20). y OK button Execute the item selected or use it to access the submenu items (p.20). u POINT ed7 8 buttons Select an item or adjust the setting values in the OnScreen Menu, or use them to pan the image in the Normal through mode (p.35). i INPUT button Select an input source (p.24). 10 Part Names and Functions Remote Control q POWER ON/STAND-BY button Turn the projector on or off (pp.18, 19). w NO SHOW button Temporarily turn off the image on the screen (p.23). e LIGHT button Light up the remote control buttons for about 10 seconds (p.22). r LAMP CONTROL button Select a lamp mode (pp.22, 29). t MENU button Open or close the On-Screen Menu (p.20). e w q ON/STAND-BY LIGHT LAMP CONTROL r LAMP MENU NO SHOW FREEZE RESET !8 t !7 y POINT ed7 8 buttons Select an item or adjust the setting values in the On-Screen Menu, or use them to pan the image in the Normal through mode (p.35). u SCREEN button Select a screen size (pp.23, 34). OK y u !6 i BRIGHTNESS button Adjust the brightness of a projected image (pp.23, 28). o LENS IRIS button Adjust the lens iris (pp.23, 29). SCREEN IMAGE ADJ. BRIGHTNESS CONTRAST IMAGE !5 !4 !0 INPUT buttons Select an input source (p.24). !1 INFO. button Display the input source information (p.41). !2 IMAGE buttons Select an image level (pp.23, 27). !3 COLOR button Adjust the color intensity of a projected image (pp.23, 28). !4 CONTRAST button Adjust the contrast of a projected image (pp.23, 28). i BRIGHT LENS IRIS CONT. COLOR !3 IMAGE PRESET COMPONENT USER HDMI H1/H2 INFO. o IRIS !2 VIDEO C1/C2 !0 S-VIDEO INPUT PC !1 !5 IMAGE ADJ. button Display the Image adj. Menu items one at a time and directly adjust its image level (pp.23, 28). !6 OK button Execute the selected item or access the sub-menu items (p.20). !7 RESET button Reset to the previous figure. This function is limited to when selecting the Image Adjustment (pp.28 ­ 31), Picture Adjustment (p.33) and the Keystone function in the Setting (p.36). !8 FREEZE button Freeze the picture on the screen (p.22). To ensure safe operation, observe the following precautions: ­ Do not bend, drop, or expose the remote control to moisture or heat. ­ For cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any other chemicals. CXVT 11 Part Names and Functions Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing any buttons. Maximum operating range for the remote control is about 16.4' (5 m) and 60 degrees in front of the projector. 16.4' (5 m) 60° Remote control Remote Control Battery Installation 1 Open the battery compartment lid. Pull up the lid and open it. 2 Install new batteries into the compartment. Two AA size batteries For correct polarity (+ and ­), be sure battery terminals are in contact with pins in the compartment. 3 Replace the compartment lid. * When the batteries of the remote control are replaced, the remote control code automatically returns to the initial code (Code 1) (p.39). To insure safe operation, please observe the following precautions: Use two (2) AA or LR6 type alkaline batteries. Always replace batteries in sets. Do not use a new battery with a used battery. Avoid contact with water or liquid. Do not expose the remote control to moisture or heat. Do not drop the remote control. If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 12 Installation Positioning the Projector This projector is designed to project on a flat projection surface having a focus range of 3.9' (1.2 m) to 30.2' (9.2 m) at maximum zoom and 7.9' (2.4 m) to 30.2' (9.2 m) at minimum zoom. Refer to the figure and table below for the screen size and distance between the projector and screen. 30.2' (9.2 m) (Inch Diagonal) 300" 15.1' (4.6 m) 9.8' (3.0 m) 7.9' (2.4 m) Max. Zoom 150" 3.9' (1.2 m) 150" Min. Zoom 100" 80" 50" 75" 40" 40" (Center) Screen Size (W x H) mm 16 : 9 aspect ratio 40" 886 x 498 7.9' (2.4 m) 3.9' (1.2 m) 80" 1771 x 996 16.0' (4.9 m) 7.9' (2.4 m) 100" 2214 x 1245 20.0' (6.1 m) 9.8' (3.0 m) 150" 3321 x 1868 30.2' (9.2 m) 15.1' (4.6 m) 300" 6641 x 3736 ­­-­­ 30.2' (9.2 m) Zoom (min) Zoom (max) Notes: · The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. · All measurements are approximate and may vary from the actual sizes. Adjustable Feet Projection angle can be adjusted up to 7.7 degrees with the adjustable feet. 1 2 Rotate the adjustable feet and tilt the projector to the proper height; to raise the feet, rotate the both feet clockwise. To lower or to retract the adjustable feet, rotate the both feet counterclockwise. Keystone distortion of the projected image can be corrected by menu operation (p.36). Adjustable Feet 13 Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100 ­ 120 V or 200 ­ 240 V AC and it automatically selects a correct input voltage. It is designed to work with the single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on. S-VIDEO CO HDMI 1 HDMI 2 COMPUTER VIDEO Y Pb/Cb Pr/Cr CO CAUTION For safety, unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with the AC power cord and the Main On/Off switch is on, it is in stand-by mode and consumes a little electric power. Turn the Main On/Off switch off when the projector is not in use. Connect the AC power cord (supplied) to the projector. The AC outlet must be near this equipment and must be easily accessible. NOTE ON THE POWER CORD AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and a proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer. Projector side For the U.S.A. and Canada Ground AC outlet side For Continental Europe For the U.K. To power cord connector on your projector. To the AC outlet. (120V AC) To the AC outlet. To the AC outlet. (200 ­ 240V AC) (200 ­ 240V AC) 14 Installation Moving the Lens The projection lens can be moved up and down or left and right manually with the Lens Shift Rings, enabling you to adjust the position of a projected image. After adjusting the position, lock the lens with the Lens Shift Lock. Move the projection lens to the left or right with the Horizontal Lens Shift Ring. Move the projection lens up or down with the Vertical Lens Shift Ring. Horizontal Lens Shift Ring (Left/Right) Lens Shift Lock Vertical Lens Shift Ring (Up/Down) Horizontal Lens Shift (Left/Right) 1/2W W 1/2W W Before using the Lens Shift Rings, make sure that this lock is released. leftmost rightmost Vertical Lens Shift (Up/Down) V V V V uppermost downmost Notes: · The best image is generally obtained at the central axis of the lens shift. · With maximum lens shift in each direction, image distortion may be observed at the edge of the screen. · With the maximum horizontal lens shift, the maximum vertical lens shift cannot be obtained, and vice versa. · The Lens Shift Rings are locked at the factory. Make sure that the Lens Shift Lock is released before using the Lens Shift Rings. 15 Installation This projector can be connected up to six equipment at one time. See the figures below for the connections. Connecting to Video Equipment (Video, S-Video) Video, S-video Use a video cable or a S-video cable (commercially available). Video Equipment Composite Video Output S-VIDEO Output Video Cable (RCA x 1) S-video Cable VIDEO S-VIDEO S-VIDEO COMPONENT 1 SERVICEPOR HDMI 1 HDMI 2 COMPUTER VIDEO Y Pb/Cb Pr/Cr COMPONENT 2 Connecting to Video Equipment (Component) Component Use a component cable (optional). Video Equipment Component Video Output (Y, Pb/Cb, Pr/Cr) Component Cable (RCA x 3) Notes: · To order the optional cables, see page 55. · When connecting HDTV equipment to the projector's COMPONENT 1/2 terminals, horizontal line noise may be noted only occasionally. Then adjust the value of Fine sync. The factory default value of Fine sync is "10." The setting can be adjusted from 0 to +31 (see page 33). Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the cables. COMPONENT S-VIDEO COMPONENT 1 HDMI 1 HDMI 2 COMPUTER VIDEO Y Pb/Cb Pr/Cr COMPONENT 2 SERVICEPORT 16 Installation Connecting to Video Equipment (HDMI, RGB Scart) HDMI Use a HDMI cable (optional) for HDMI output. RGB Scart Use a Scart-VGA cable (optional). Video Equipment Video Equipment HDMI Video Output RGB Scart 21-pin Output HDMI Cable Scart-VGA Cable HDMI COMPUTER S-VIDEO S-VIDEO COMPONENT 1 HDMI 1 HDMI 2 COMPUTER VIDEO Y Pb/Cb Pr/Cr COMPONENT 2 SERVIC COMPONENT 1 HDMI 1 HDMI 2 COMPUTER VIDEO Y Pb/Cb Pr/Cr COMPONENT 2 SERVICEPORT Connecting to a Computer Computer (Analog) Use a VGA cable (commercially available) or a DVI-VGA cable (commercially available). IBM-compatible or Macintosh computer Monitor Out DVI-VGA Cable VGA Cable COMPUTER S-VIDEO COMPONENT 1 SERVICEPORT Note: · To order the optional cables, see page 55. HDMI 1 HDMI 2 COMPUTER VIDEO Y Pb/Cb Pr/Cr COMPONENT 2 Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the cables. 17 Basic Operation Turning On the Projector 1 2 3 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. Connect the projector's AC power cord into an AC outlet and turn the Main On/Off switch on. The POWER indicator lights red. Press the POWER ON/STAND-BY button on the top control or on the remote control. The POWER indicator turns green and the cooling fans start to operate. As the automatic slide shutter opens, a preparation display appears on the screen and the countdown starts. POWER indicator POWER ON/STAND-BY button ON/STAND-BY NO SHOW Top Control FREEZE Remote Control 4 After the countdown, the input source that was selected the last time appears on the screen. Main On/Off switch Notes: · If the automatic slide shutter does not open properly, the projector will not be turned on and the POWER indicator will blink orange. Press the POWER ON/STAND-BY button again to restart. · When "Countdown off" or "Off" is selected in the Display function, the countdown will not be displayed on the screen (p.38). · During the countdown period, all operations are invalid. OFF ON Selected Input Source Automatic Slide Shutter Use this tab when handling manually. Do not touch the slide shutter while it is moving, as this could cause injury or the projector to malfunction. 18 Basic Operation Turning Off the Projector 1 Press the POWER ON/STAND-BY button on the top control or on the remote control. "Power off?" appears on the screen. Press the POWER ON/STAND-BY button again to turn off the projector. When the Power off confirmation function is set to "Off," the projector can be turned off without the confirmation message. (See "Power off confirmation" on page 38.) "Power off?" disappears after 4 seconds. The automatic slide shutter closes and the POWER indicator starts to blink red. The blinking continues for about 60 seconds while the cooling fans are running. 2 When the projector is cooled down enough to be turned on again, the POWER indicator becomes red. Then you can turn the Main On/Off switch off and unplug the AC power cord. TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST FIVE (5) MINUTES BEFORE TURNING IT OFF. DO NOT UNPLUG AC POWER CORD WHILE COOLING FANS ARE RUNNING OR BEFORE POWER INDICATOR STOPS BLINKING. OTHERWISE IT WILL RESULT IN SHORTENING LAMP LIFE. Notes: · If the automatic slide shutter is closed during operation, the projector is automatically turned off for safety. Be sure to turn off the projector by pressing the POWER ON/STAND-BY button on the top control or on the remote control after use. · While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator becomes red to be turned on again. · Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and let stand for about an hour in every 24 hours. · The running speed of cooling fans is changed according to the temperature inside the projector. · If the WARNING indicator blinks or emits red light, see "Warning Indicator" on page 42. · Do not put the projector in a case before it is cooled enough. 19 Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Top Control 1 2 3 4 5 Press the MENU button on the top control or on the remote control to display the On-Screen Menu. Use the Point ed buttons to highlight or select a main menu item. Press the Point 8 or OK buttons to access the submenu items. (The selected item is highlighted in ORANGE.) Use the Point ed buttons to select the desired submenu item and press the Point 8 or OK buttons to access the selected item. Use the Point 7 8 or OK buttons to adjust the setting or switch between each option and press the OK or Point 8 buttons to activate it and return to the submenu. Press the Point 7 button to return to the main menu; press the MENU button again to exit the On-Screen Menu. SCREEN IMAGE ADJ. POINT buttons (arrowhead) OK button MENU button Remote Control LAMP MENU NO SHOW FREEZE RESET MENU button POINT buttons (arrowhead) OK IMAGE OK button On-Screen Menu (Main Menu) Point Right or OK buttons The selected item is highlighted in ORANGE. On-Screen Menu (Submenu) 20