www.seuservice.com 1st PRINTING OCT 01 DELUXE VERSION OWNER'S MANUAL SEGA ENTERPRISES, INC. USA MANUAL NO. 4201-6545-01 VISIT OUR WEBSITE! TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER'S MANUAL 1. HANDLING PRECAUTIONS ......................................................................... 1 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ................. 2 ~ 3 3. OPERATION .................................................................................................... 4 ~ 6 4. NAME OF PARTS ............................................................................................ 7 5. ACCESSORIES ................................................................................................ 8 ~ 10 6. ASSEMBLING AND INSTALLATION .......................................................... 11 ~ 29 7. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE ....... 30 ~ 31 8. CONTENTS OF GAME ................................................................................... 32 ~ 37 9. EXPLANATION OF TEST AND DATA DISPLAY ....................................... 38 ~ 48 9 - 1 SWITCH UNIT AND COIN METER .................................................... 39 9 - 2 SYSTEM TEST MODE .......................................................................... 40 9 - 3 GAME TEST MODE .............................................................................. 41 ~ 48 10. CONTROL PANEL(HANDLE MECHA) ........................................................ 49 ~ 56 10 - 1 REMOVING THE HANDLE MECHA .................................................. 49 ~ 54 10 - 2 VOLUME ADJUSTMENT/REPLACEMENT ...................................... 55 ~ 56 11. SHIFT LEVER .................................................................................................. 57 ~ 58 11 - 1 REMOVING THE SHIFT LEVER ........................................................ 57 11 - 2 SWITCH REPLACEMENT ................................................................... 58 12. ACCELERATOR & BRAKE ........................................................................... 59 ~ 61 12 - 1 REMOVING THE ACCELERATOR AND THE BRAKE ................... 59 12 - 2 ADJUSTING OR REPLACING THE VOLUME .................................. 60 ~ 61 12 - 3 GREASING ............................................................................................. 61 13. COIN SELECTOR ............................................................................................ 62 ~ 65 14. PROJECTOR ..................................................................................................... 66 ~ 79 14 - 1 CLEANING THE SCREEN ................................................................... 66 14 - 2 ADJUSTMENT OF TOSHIBA PROJECTOR ....................................... 67 ~ 76 14 - 3 ADJUSTMENT OF MITSUBISHI PROJECTOR ................................. 76 ~ 79 15. REPLACING THE FLUORESCENT LAMP,AND LAMPS ........................... 80 ~ 83 16. PERIODIC INSPECTION TABLE .................................................................. 84 17. TROUBLESHOOTING .................................................................................... 85 ~ 87 18. GAME BOARD ................................................................................................ 88 ~ 92 18 - 1 REMOVING THE BOARD ................................................................... 88 ~ 89 18 - 2 COMPOSITION OF GAME BOARD .................................................... 90 18 - 3 ERROR DISPLAY(DRIVE CONTROL BOARD) ................................ 91 ~ 92 19. DESIGN RELATED PARTS ............................................................................ 93 20. PARTS LIST ..................................................................................................... 94 ~139 21. WIRE COLOR CODE TABLE ......................................................................... 140 22. WIRING DIAGRAM ........................................................................................ XXX SPECIFICATIONS 1,580 mm (W) X 2,460 mm (D) (62.2 in. X 96.9 in.) Height : 2,230 mm (1045.0 in.) Weight : Approx.474 kg. (743.0 lbs.) Power, maximum current : 680 W 7.63 A (AC 110V 50 Hz AREA) 660 W 7.39 A (AC 110V 60 Hz AREA) 650 W 6.79 A (AC 120V 60 Hz AREA) 700 W 3.90 A (AC 220V 50 Hz AREA) 690 W 3.89 A (AC 220V 60 Hz AREA) 720 W 3.94 A (AC 230V 50 Hz AREA) 700 W 3.80 A (AC 230V 60 Hz AREA) 690 W 3.61 A (AC 240V 50 Hz AREA) 660 W 3.44 A (AC 240V 60 Hz AREA) For TAIWAN (MITSUBISHI PROJECTION DISPLAY TYPE) Power, current : 680 W 8.00 A (MAX.) 300 W 3.40 A (MIN.) For TAIWAN (TOSHIBA PROJECTION DISPLAY TYPE) Power, current : 705 W 8.10 A (MAX.) 310 W 3.60 A (MIN.) MONITOR : 50 TYPE PROJECTION DISPLAY Installation space : INTRODUCTION OF THE OWNER'S MANUAL This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards the product, EIGHTEEN WHEELER DELUXE. This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufficiently understanding the instructions. If the product fails to function satisfactorily, nontechnical personnel should under no circumstances touch the internal system. Please contact where the product was purchased from. Use of this product is unlikely to cause physical injuries or damages to property. However, where special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in this manual. STOP Indicates that mishandling the product by disregarding this display can cause the product's intrinsic performance not to be obtained, resulting in malfunctioning. IMPORTANT SEGA ENTERPRISES, INC. (U.S.A.)/CUSTOMER SERVICE 45133 Industrial Drive, Fremont, California 94538, U.S.A. Phone : (415) 701-6580 Fax : (415) 701-6594 DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's maintenance man or a serviceman to carry out, or work which is not explained in this manual. Failing to comply with this instruction can cause a severe accident such as electric shock. Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work should be performed by the serviceman who has technical expertise and knowledge. The location's maintenance man and serviceman are herein defined as follows: "Location's Maintenance Man" : Those who have experience in the maintenance of amusement equipment and vending machines, etc., and also participate in the servicing and control of the equipment through such routine work as equipment assembly and installation, servicing and inspections, replacement of units and consumables, etc. within the Amusement Facilities and or locations under the management of the Owner and Owner's Operators of the product. Activities of Location's Maintenance Man : Assembly & installation, servicing & inspections, and replacement of units & consumables as regards amusement equipment, vending machines, etc. Serviceman : Those who participate in the designing, manufacturing, inspections and maintenance service of the equipment at an amusement equipment manufacturer. Those who have technical expertise equivalent to that of technical high school graduates as regards electricity, electronics and or mechanical engineering, and daily take part in the servicing & control and repair of amusement equipment. Serviceman's Activities : Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of amusement equipment and vending machines. 1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine. Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit. In the case work should be performed in the status of power on, this manual always states to that effect. To avoid electric shock or short circuit, do not plug in or unplug quickly. To avoid electric shock, do not plug in or unplug with a wet hand. Do not expose Power Cords and Earth Wires on the surface, (floor, passage, etc.). If exposed, the Power Cords and Earth Wires are susceptible to damage. Damaged cords and wires can cause electric shock or short circuit. To avoid causing a fire or electric shock, do not put things on or damage Power Cords. When or after installing the product, do not unnecessarily pull the power cord. If damaged, the power cord can cause a fire or electric shock. In case the power cord is damaged, ask for replacement through where the product was purchased from or the office herein stated. Using the cord as is damaged can cause fire, electric shock or leakage. Be sure to perform grounding appropriately. Inappropriate grounding can cause an electric shock. Be sure to use fuses meeting specified rating. Using fuses exceeding the specified rating can cause a fire or electric shock. Completely make connector connections for IC BD and others. Insufficient insertion can cause an electric shock. Specification changes, removal of equipment, conversion and/or addition, not designated by SEGA are not permitted. · Failure to observe this may cause a fire or an electric shock. Non-compliance with this instruction can have a bad influence upon physical conditions of the players or the lookers-on, or result in injury during play. · SEGA shall not be held responsible for damage, compensation for damage to a third party, caused by specification changes not designated by SEGA. Be sure to perform periodic maintenance inspections herein stated. STOP IMPORTANT For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not permitted, so be careful in this regard. The Projector is employed for this machine. The Projector's screen is susceptible to damage, therefore, be very careful when cleaning the screen. For details, refer to PROJECTOR. 1 www.seuservice.com 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and or malfunctioning. Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc. Places subject to direct sunlight, or places subject to high temperatures in the proximity of heating units, etc. Places filled with inflammable gas or vicinity of highly inflammable/volatile chemicals or hazardous matter. Dusty places. Sloped surfaces. Places subject to any type of violent impact. Vicinity of anti-disaster facilities such as fire exits and fire extinguishers. The operating (ambient) temperature range is from 5° C to 40° C. Only in the case a projector is employed, the temperature range is from 5° C to 30° C. LIMITATIONS OF USAGE REQUIREMENTS Be sure to check the Electrical Specifications. Ensure that this product is compatible with the location's power supply, voltage and frequency requirements. A plate describing Electrical Specifications is attached to the product. Non-compliance with the Electrical Specifications can cause a fire and electric shock. This product requires the Breaker and Earth Mechanisms as part of the location facilities. Using them in a manner not independent can cause a fire and electric shock. Ensure that the indoor wiring for the power supply is rated at 15A or higher (AC single phase 100 ~ 120V area), and 7A or higher (AC 220 ~ 240V area). Non-compliance with the Electrical Specifications can cause a fire and electric shock. Be sure to independently use the power supply equipped with the Earth Leakage Breaker. Using a power supply without the Earth Leakage Breaker can cause an outbreak of fire when earth leakage occurs. Putting many loads on one electrical outlet can cause generation of heat and a fire resulting from overload. When using an extension cord, ensure that the cord is rated at 15A or higher (AC 100 ~ 120V area) and 7A or higher (AC 220 ~ 240V area). Using a cord rated lower than the specified rating can cause a fire and electric shock. www.seuservice.com 2 OPERATION AREA For the operation of this machine, secure a minimum area of 2.905m (W) X 2.56m (D). In order to preve ...