420-6967-01 1ST PRINTING LOVE AND BERRY Dress up and Dance! OWNER'S MANUAL 420-6967-01 OWNER'S MANUAL Nissay Aroma Building, 5-37-1, Kamata, Ohta-ku, Tokyo 144-8721, Japan Phone: +81-3-5480-6582 Facsimile: +81-3-5480-6584 © SEGA IMPORTANT · Before using this product, read this manual carefully to understand the contents herein stated. · After reading this manual, be sure to keep it near the product or in a convenient place for easy reference when necessary. TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION 1. HANDLING PRECAUTIONS .............................................................................................................................................. 1 2. PRECAUTIONS REGARDING INSTALLATION LOCATION ............................................................................................. 3 2 - 1 LIMITATIONS OF USAGE .................................................................................................................................. 3 2 - 2 OPERATION AREA............................................................................................................................................. 4 3. PRECAUTIONS REGARDING PRODUCT OPERATION .................................................................................................. 5 3 - 1 BEFORE OPERATION........................................................................................................................................ 5 3 - 2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) .................................................................... 6 4. PART DESCRIPTIONS ...................................................................................................................................................... 7 5. ACCESSORIES.................................................................................................................................................................. 8 6. ASSEMBLY AND INSTALLATION ..................................................................................................................................... 9 7. MANAGEMENT CHIP AND FASHION MAGIC CARDS .................................................................................................... 17 7 - 1 INSTALLING MANAGEMENT CHIP ................................................................................................................... 17 7 - 2 MANAGEMENT CHIP ERROR CODES ............................................................................................................. 19 7 - 3 REFILLING CARDS ............................................................................................................................................ 21 7 - 4 DEALING WITH JAMMED CARDS ..................................................................................................................... 23 8. PRECAUTIONS WHEN MOVING THE MACHINE ............................................................................................................ 26 9. GAME DESCRIPTION ....................................................................................................................................................... 26 10. SystemSP BOARD ........................................................................................................................................................... 27 10 - 1 EXTERNAL VIEW ............................................................................................................................................. 27 10 - 2 MONITOR PLACEMENT AND HORIZONTAL SCANNING FREQUENCY ...................................................... 28 10 - 3 ERROR MESSAGES ........................................................................................................................................ 29 10 - 4 REMOVING THE BOOT ROM .......................................................................................................................... 31 10 - 5 REMOVING THE LITHIUM BATTERY .............................................................................................................. 32 10 - 6 INSERTION/REMOVAL OF THE LITHIUM BATTERY ..................................................................................... 33 10 - 7 SOFTWARE UPGRADE ................................................................................................................................... 34 10 - 8 KEY CHIP .......................................................................................................................................................... 36 11. EXPLANATION OF TEST AND DATA DISPLAY ............................................................................................................. 37 11 - 1 MAINTENANCE SWITCH UNIT AND COIN METER......................................................................................... 38 11 - 2 COIN/CREDIT ASSIGNMENTS ......................................................................................................................... 39 11 - 3 SYSTEM TEST MODE ....................................................................................................................................... 40 11 - 4 GAME TEST MODE ........................................................................................................................................... 54 12. CARD DISPENSER.......................................................................................................................................................... 55 13. CARD READER (CONTROL PANEL).............................................................................................................................. 56 13 - 1 HOW TO CLEAN THE CARD READER ........................................................................................................... 56 13 - 2 HOW TO REMOVE THE CARD READER ....................................................................................................... 57 13 - 3 REMOVING THE PUSH BUTTON ................................................................................................................... 59 14. POWER UNIT................................................................................................................................................................... 61 14 - 1 HOW TO REMOVE THE POWER UNIT ........................................................................................................... 61 14 - 2 COMPOSITION OF THE POWER UNIT ........................................................................................................... 62 15. COIN SELECTOR AND BILL ACCEPTOR ...................................................................................................................... 63 16. MONITOR......................................................................................................................................................................... 65 16 - 1 CAUTIONS/WARNINGS REGARDING SAFETY FOR HANDLING THE MONITOR ....................................... 65 16 - 2 CLEANING THE CRT SURFACES AND THE MONITOR COVER .................................................................. 66 16 - 3 MONITOR ADJUSTMENT ................................................................................................................................ 67 17. PERIODIC INSPECTION ................................................................................................................................................. 69 18. TROUBLESHOOTING ..................................................................................................................................................... 70 19. GAME BOARD ................................................................................................................................................................. 72 19 - 1 REMOVING THE GAME BOARD ..................................................................................................................... 72 19 - 2 COMPOSITION OF THE GAME BOARD ......................................................................................................... 73 20. DESIGN-RELATED PARTS ............................................................................................................................................. 74 21. PARTS LIST ..................................................................................................................................................................... 75 22. WIRE COLOR CODE TABLE........................................................................................................................................... 106 23. WIRING DIAGRAM .......................................................................................................................................................... 107 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 E0-0607 -- 420-6967-01 INTRODUCTION This manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product, "LOVE AND BERRY Dress up and Dance!" This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufficiently understanding the instructions. In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the outlet, and contact the office listed below or the point-ofpurchase for this product. Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special attention are indicated by thick underlining, the word "IMPORTANT" and the symbol below. STOP IMPORTANT Indicates important information that, if ignored, may result in the mishandling of the product and cause faulty operation or damage to the product. Sega Amusements U.S.A., Inc. 800 Arthur Avenue, Elk Grove Vllage, IL 60007-5215, U.S.A. TEL: TOLL FREE: FAX: 1-847-364-9787 1-888-877-2669 1-847-427-1065 SPECIFICATIONS Installation space: Height [POP assembled]: Weight: Power, maximum current: Card capacity: Monitor: 719mm (28.3 in.) [Width] × 730 mm (28.7 in.) [Depth] 1,285 mm (50.6 in.); [1,629 mm (64.1 in.)] 88 kg (194.0 lbs.) 75.5 W, 1.1 A (AC 120 V, 60 Hz Area) 600 (Max.) 14 Type Color Monitor NOTE: The contents heren descrbed are subject to change wthout notce. - - Definition of 'Site Maintenance Personnel or Other Qualified Individuals' WARNING Procedures not described in this manual or marked as 'to be carried out by site maintenance personnel or other qualified professionals' should not be carried out by personnel without the necessary skill or technology. Work carried out by unqualified persons may cause serious accidents, including electrocution. Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel or other qualified professionals. This manual includes directions that potentially dangerous procedures should only be carried out by professionals with the appropriate specialized knowledge. The 'site maintenance personnel or other qualified professionals' mentioned in this manual are defined as follows: Site maintenance personnel: Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the supervision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable parts. Activities to be carried out by site maintenance personnel: Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable parts. Other qualified professionals: Persons employed by amusement equipment manufacturers, or involved in design, production, testing or maintenance of amusement equipment. The individual should have either graduated from technical school or hold similar qualifications in electrician/electronics/mechanical engineering. Activities to be carried out by other qualified professionals: Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/ mechanical parts. - - - v - 1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 ...