User manual SEGA THE HOUSE OF THE DEAD 4

TABLE OF CONTENTS E0-0511 420-6908-01 INTRODUCTION This manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. for the product, "The House of the Dead 4." This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufficiently understanding the instructions. In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the outlet, and contact the office listed below or the point-of-purchase for this product. Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special attention are indicated by thick underlining, the word "IMPORTANT" and the symbol below. Indicates important information that, if ignored, may result in the mishandling of the product and cause faulty operation or damage to the product. SPECIFICATIONS This product can use GPL/LGPL software, which is open source software. This means that customers who purchase this product can freely obtain, alter and pass-on the source code for this software (hereafter referred to as "the source code"). Downloading this software is an indication of the customer's agreement to the GPL/ LGPL contract of use and thus the download and all subsequent use of the source code is the full responsibility of the customer. Furthermore this source code and the download service is provided totally as-is, with no guarantees of effectiveness, completeness, usefulness or reliability, and our company offers no support concerning this source code. Customers using this product who with to obtain this source code should enter the following password on the website below to download it. URL: http://amproduct-softlicense.sega.jp/ ID: amsoftwebdl Password: segaamhd1 GPL/LGPL Contract Site URL: http://www.fsf.org/licenses/gpl.html URL: http://www.fsf.org/licenses/lgpl.html Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel or other qualified professionals. This manual includes directions that potentially dangerous procedures should only be carried out by professionals with the appropriate specialized knowledge. The "site maintenance personnel or other qualified professionals" mentioned in this manual are defined as follows: Site maintenance personnel: Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the supervision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable parts. Activities to be carried out by site maintenance personnel: Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable parts. Other qualified professionals: Persons employed by amusement equipment manufacturers, or involved in design, production, testing or maintenance of amusement equipment. The individual should have either graduated from technical school or hold similar qualifications in electrician/electronics/mechanical engineering. Activities to be carried out by other qualified professionals: Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/ mechanical parts. 1. HANDLING PRECAUTIONS This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and Electrical Specifications. It also has a Sticker describing where to contact for repair and for purchasing parts. When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker. The Serial Number indicates the product register. Identical machines could have different parts depending on the date of production. Also, improvements and modifications might have been made after the publication of this manual. In order to ensure you order the correct parts, mention the Serial No. when contacting the applicable places. This SEGA product has warning displays on stickers, labels and/or printed instructions adhered/attached to or incorporated in the places where a potentially hazardous situation could arise. The warning displays are intended for accident prevention for customers and for avoiding hazardous situations relating to maintenance and servicing work. Some portions of the cabinet contain high voltage and may cause accidents if touched. When performing maintenance, be very careful of the warning displays. It is especially important that any complex repair and replacement work not mentioned herein should be performed by those technical personnel who have knowledge of electricity and technical expertise. In order to prevent accidents, caution any customer ignoring the warnings to stop immediately. 2. PRECAUTIONS REGARDING INSTALLATION LOCATION 3. PRECAUTIONS REGARDING PRODUCT OPERATION 4. PART DESCRIPTIONS 5. ACCESSORIES NOTE: When you order the DVD-ROM disc only, specify the part number 610-0726-0003 (DVD SOFT HDF). 6. ASSEMBLY AND INSTALLATION How to Hold a Disc With both hands: With one hand: INPUT TEST PLAYER1 PLAYER2 START OFF OFF GUN TRIGGER OFF OFF GUN BUTTON OFF OFF GUN SPEED X 7f 7f GUN SPEED Y 7f 7f GUN X 00 00 GUN Y 00 00 SCREEN IN OUT OUT SERVICE OFF TEST OFF PRESS TEST AND SERVICE TO EXIT OUTPUT TEST START1 LAMP OFF START2 LAMP OFF -> EXIT SELECT WITH SERVICE AND PRESS TEST GUN MARK CHECK OUT OF SCREENP1 OUTOFSCREENP2 PRESS TEST TO EXIT 7. PRECAUTIONS WHEN MOVING THE MACHINE 8. GAME DESCRIPTION NOTE: The maximum number of credits that can be counted at once is "24." Any coins inserted after 24 credits have been counted will not be counted as credits, nor will they be refunded. However, they will be counted as inserted coins on the data display and by the coin meter.