User manual SEIKO DM70

DIGITAL METRONOME DM70 INSTRUCTION MANUAL NAME AND OPERATION OF PARTS Volume setting (for both metronome sound and reference note) 1. Press the power button to turn on the metronome. to show the volume setting mode. 2. Press the selector button "VOLUME" will be shown on the display. 3. Press UP or DOWN button to set the volume to the desired level. With each press, the volume level changes one by one in the following order. High No sound Low Mid Reference note setting 1. Press the power button to turn on the metronome. to show the reference note setting 2. Press the selector button mode. " " will be shown on the display. or DOWN button to set the desired note. (The 3. Press UP reference pitch is A4 = 440 Hz.) With each press, the note changes one by one in the following order. Power button Press it to turn on and off the metronome. Tempo LED display It visually represents the tempo of the metronome with the flashing of the LED. (The LED will not light up in the reference note mode.) Selector button Press it to select the setting item from tempo, beat/rhythm, volume and reference note. Liquid crystal display It indicates the settings you have made. / UP/DOWN button C C# D D# E F F# G G# A A# B (d) (d#) (b) MEMORY BACKUP FUNCTION Even after the metronome is turned off, the settings you have made are stored in memory and will not be erased. If the battery is replaced with a new one, the metronome will return to the following initial settings. 1. 2. 3. 4. Tempo Beat/rhythm Reference note Volume [120] [0] [A] [High] Press it to change the setting of the item selected by pressing the . selector button Prop-up stand Set it up to prop up the metronome. Speaker It gives out the tempo sound of the metronome and the reference note. Earphone jack (monophonic type) Insert the ø2.5 mm earphone plug into it to use the earphone. No sound is given out while the earphone jack is in use. Battery hatch Open it when replacing the battery. BATTERY CHANGE When the battery nears its end, the tempo LED display and the liquid crystal display become dim, and the sound becomes weak. In that case, replace the battery with a new one immediately. Otherwise, the metronome may work improperly. How to replace the battery 1. Be sure to press the power button to turn off the metronome. 2. Loosen and remove the screw , and fixing the battery hatch open it. 3. Slide the battery to remove it. 4. Set the new battery, checking that the (+) and (­) terminals are properly set. , and 5. Close the battery hatch tighten the screw to fix it. HOW TO USE The battery included with the metronome is a monitor battery, and its life may be shorter than the specified period. 6. Press the power button repeatedly to turn on and off the metronome, and check if it operates properly. Tempo setting to turn on the metronome. 1. Press the power button to show the tempo setting mode. 2. Press the selector button "TEMPO" will be shown on the display. 3. Press UP or DOWN button to set the desired tempo. With each press, the tempo is increased or decreased by one, respectively. The digits move quickly by 10 tempos if the button is kept pressed. * Be sure to set the (+) an (­) terminals of the battery properly. Otherwise, a malfunction will result. * When the battery is replaced with a new one, tempo, beat/rhythm, reference note and volume settings you have made are all erased. Set them as desired before using the metronome. * When disposing of the old battery, observe the regulations of the authorities concerned. * Keep the old battery and the battery hatch beyond the reach of children. If a child swallows either of them, consult the doctor immediately. SPECIFICATIONS 1. 2. 3. 4. 5. 6. 7. Display Speaker Tempo range Beat/rhythm range Reference note Volume Accuracy : Liquid crystal display : Piezoelectric speaker : 30 ~ 250 times/min. : 0 ~ 7, , , , , , Beat/rhythm setting 1. Press the power button to turn on the metronome. to show the beat/rhythm setting 2. Press the selector button mode. "BEAT/RHYTHM" will be shown on the display. 3. Press UP or DOWN button to set the desired beat/rhythm. With each press, the beat/rhythm changes one by one in the following order. 01234567 30 31 · · · · · 119 120 121 · · · · · 249 250 : C4 ~ B4 (at one-semitone steps) : 4-level volume control (no sound, low, mid and high) : Metronome: ±0.2% Reference note: ±1 cent 8. Power supply : Lithium battery CR2025, 1 piece 9. Earphone jack : ø2.5 mm monophonic type 10. Battery life : Approx. 200 hours ( if the metronome is continuously used with the tempo set at "120", beat/rhythm at "0", and volume at "High") 11. Overall dimensions : 54 (W) x 86 (H) x 10 (D) mm 12. Weight : Approx. 45 g (including battery) * The design and specifications are subject to change without prior notice for product improvement.