O587-Sendo-UK-12pp-insert 17/10/01 1:10 pm Page 1 Your phone 2 3 1 4 2 Making a call Dialling a number 1 Key in the area code and number that you want to call then press , Call, to dial. To delete the entire number and return to the main screen, press and hold . 2 You can adjust the earpiece volume in a call by using the front keys . 3 To end the call, press , End. Answering a call Making an emergency call 1 Enter 112 (or the local emergency number). Press , Call, to dial. Ringer tone composer In call options When you are in a call, you can press , Options, these could be: Contacts Gives you access to the contact list. Hold/Unhold Puts the active call on hold/reactivates the held call. Mute/Unmute Switches the microphone off/on. Send message Allows you to send a text message. SIM Toolkit Gives you access to the SIM Toolkit. Swap Swaps between the current call and the call on hold. End all Ends all calls. Go into the Sounds menu and press Composer. Change your ringer tones to personalise your phone. Create your own tones with our ring tone composer. You have 2 entry methods. Text Graphic notes are entered textually notes are entered on a musical score , Changes the duration of the note. Each press decreases the duration of the note between the range: full note, half note, quarter note, eighth note, sixteenth note and thirty-second note. Changes a normal note to a sharp and a sharp back to a normal note. Changes a normal note to a dotted, double dotted or 2/3 note. Erases the previous note. A long press will clear all notes. A short press of the Tip: move you between notesandeitherkeys will in entry mode. Useful tips Once you have composed the tone press , Options to enter the menu screen. The available options are: Tempo: Allows you to choose from a list of tempos at which to play your tone. Play: Allows you to play your melody. Save: Allows you to save your melody. Delete: Allows you to delete the tone. Send: Allows you to send your tone to one of your friends. Making a call from the calls list The phone stores a list of your recent incoming, outgoing and missed calls. The list stores up to 30 entries. An icon on the left of the screen indicates the type of call: Incoming call Missed call Outgoing call To dial a number from the redial/calls list: Press to access the list. Scroll and find the one that you want and press , Call, to dial. Answering a call To answer a call, press To reject a call, press , Accept. , Reject. Setting time and date Enter the Settings menu to set the time and date. Go to Set date and press Select. Enter the date, Press , OK, , Equalizer Enter the Sounds menu and select Equalizer. This menu allows you to alter the earpiece audio settings of your phone. Choose from these 3 settings for optimum audio quality: · Treble · Normal · Bass Call waiting This feature means you are informed of a second incoming call by an audible tone in the earpiece. Press , Reject, to reject the second call. Press , Accept, to put the current call on hold and activate the second call. To end the active call and return to the held call, press , End. To switch between calls, press , Options, then select the Swap option. Making calls from the contact list 1 Press from the main screen, you can also press , Contacts then select the Search option. 2 Type in the first letters of the name or scroll and find the one that you want. 3 Press , Call, to dial. Go to Set time and press , Select. Enter the time in 24 hour format, Press , OK. The date and time will be stored. Alarm clock You can use your phone as an alarm clock. Enter the Settings menu and press , Alarm. Set the alarm to On and enter the time (in 24hr format) when you require the phone to ring. When it rings press , Off, to switch it off, or , Snooze, to stop the alarm for ten minutes. The alarm will then sound again. Making an international call 1 Up and down keys Located on the front of your phone - these can increase volume or scroll through menus and options. Soft keys These keys perform the function indicated by the text immediately above them on the display. Quick Access key The function of this key will vary depending on the model of your phone. It provides quick access to a certain function such as SIM Toolkit or messaging. Clear key This erases characters or text or takes you back to your previous step, depending on the context. A long press on this key takes you back to the main screen. 2 1 Press and hold until the plus sign "+" is displayed. This replaces the international access code. 2 Enter the country code, area code, and phone number. 3 Press , Call, to dial. Both entry methods use the same key presses unless stated. In this menu the keys represent the following notes: C D E F Enters a rest (text mode) Enters a rest (graphic mode) Changes the scale of the note between the range 1-4 G A B Shortcuts To lock/unlock the keypad, press then from the main screen. To enter/exit silent mode press from the main screen. , then Speed dialling Allows you to dial a number simply by pressing and holding the assigned key from the main screen. To assign a contact list entry to a key: Press , then press and hold one of the keys to until the key number appears on the left of the screen, beside the name. This indicates that the speed dial is successfully assigned. Receiving a ringer tone If you have received a ringer tone press , Options to enter the menu from where you can play, save or delete the tone. If you press the ring tone and message will be deleted. Note: Your network may not support call waiting. If it does not, accepting a second call will end the first call. You will not be able to switch. Note: It is only possible to save 5 ringer tones whether you have composed them yourself or received them as a message. To save more you will have to overwrite an existing ringer tone. Note: The alarm will sound even if the phone is switched off. The phone will power on but you will not be able to receive or make calls. Once the alarm finishes the phone will switch off. To enter a pause while dialling press and hold until the letter p appears. This will insert a pause of 3 seconds. Declaration of conformity We: Of: Sendo International Ltd 10th Floor AIA Plaza, 18 Hysan Avenue, Causeway Bay, Hong Kong. 3 Declare under our sole responsibility that the product: SND200, Known as S200 Identified by IMEI numbers in the range: Messages Calling your voice mail When you have a new message in your voice mailbox, your phone displays either the voice mail icon in the main screen or a text message sent from the network. This depends on your service provider. Press and hold . If the phone asks for the voice mailbox number, enter it and press , Call. The number can be obtained from your service provider. Extras Sending a text message You can send messages of up to 160 characters to another GSM phone. 1 Enter the Messages menu and select the option Send. 2 Type in a new message or select a message from a list of saved messages. 3 When you have entered the text, press , Send. 4 Enter the destination phone number, or press , Contacts, and select a name from your contact list. 5 Press , Send, to send the message. Note: If you reply to a message, you do not have to re-enter the number. This is done automatically. TAC: 350156 FAC: 01 SNR: From: 000001 To: 499999 4 Predictive Text Input To save time when you are writing a text message, your phone has a feature which guesses the letters that you are typing and tries to complete the word. This input method allows you to simply press each key once. For example, to write the name "Ross", press , then , then , then just once each. The word may change as you type, but don't worry about what is on the screen until you have finished the word. Sometimes different words share the same sequence of key presses. If the finished word is wrong, press to scroll through other possibilities. If the word that you are looking for is still not there, press repeatedly to change the text mode to and enter the word again. After you have completed a word, press the space key to enter the next word. Press and hold to pick a symbol to insert from the character table. Some intelligent punctuation (including full stops, hyphens and apostrophes) are also available on . The punctuation mark is completed when you enter the next keystroke. Changing the editing mode The current editing mode is indicated at the bottom of the screen by one of these icons: Lower case text mode Upper case text mode Numeric mode T9 Text Input (lower case) T9 Text Input (upper case) You can switch between upper case, lower case, and numeric modes by repeatedly pressing . You can switch to predictive T9 Text Input by repeatedly pressing . These are the characters which come on to the screen when you press the numeric keypad. They are featured in the table below: Key 1 2 3 4 5 6 7 8 9 0 # List of characters available 1. , @ ` ? ! " : ; ¿ ¡ abc2àäåæç def3éè ghi4ì jkl5 mno6ñòöø6 pqrs7ß tuv8üù wxyz9 0 space To enter 2 characters on the same key, enter the first one and then wait for the cursor to reappear before entering the second. Example: To enter the name "Ross" when you are in lower case mode: Press to enter upper case mode, Press three times, to display "R", you will then return to lower case mode, Press three times, to display "o", Press four times, to display "s", Then press four times, to display "s". Sending a Smiley SMS Send a picture with your text message to compatible phones. All other phones will display an Internet style Smiley. Choose , Smiley. 1. Emotions 2. Celebrations 3. Sports 4. Animals 5. Others Select the Smiley you would like to use from one of these categories and press , Select. The text is restricted to 156 characters to allow space for the Smiley. FlippIT Go into the Extras menu and select FlippIT. There are 6 levels; 3x3 is the easiest. The objective of the game is to change the white discs to black discs. You do this by selecting one of the white discs by pressing the key. This turns the white disc to black, but also turns all of the discs directly above, below, to the left and to the right of the selected discs to black. You can move the cursor from one to another using the keys in the grid below. On the right of the screen you will see the number of moves that you have made so far, and also the smallest number of moves that it is possible to complete the level in. With each higher level the grid gets bigger and bigger, and harder! Scizzors Go into the Extras menu and select Scizzors. You will see an animated display. In order to select the stone, press . To select the paper press . To select the scissors press . The object of the game is to try to beat the computer by selecting one of the 3 objects. When you do this the computer also selects one of the 3 objects. The rules are simple: Scissors (2 fingers out) cuts paper, therefore scissors wins, Paper (flat palm) wraps stone, therefore paper wins, Stone (fist) blunts scissors, therefore stone wins, Two of the same result in a draw. To which this declaration relates, is in conformity with the following standards: EN60950 (Electrical Safety Standard, IT equipment) ETS 300 342-1 (Product standard for EMC) ETS 300 607-1 (GSM Phase 2 MS test specification) as defined in: TBR19 (as interpreted by GT01 version 4.6) TBR20 (as interpreted by GT01 version 4.6) TBR31 (as interpreted by GT01 version 4.6) TBR32 (as interpreted by GT01 version 4.6) ES 59005 (European Council recommendation 1999/519/EC) We hereby declare that the above named product is in conformity to all the essential requirements of Directive 1999/5/EC. The conformity assessment procedure referred to in Article 10 Reading a text message When you receive a text message, the envelope icon is displayed at the top of the main screen. 1 Press , Read, to display the new message directly from the main screen. 2 To read old messages select read from the messages menu. 3 Use the up and down keys and to scroll through the message. 4 Press , Options, to access the following message options: Removes the message. Sends a text message to the sender. Calls the sender (or, if there is a number in quotes in the message, this number is called instead). Save no. Adds the sender's phone number to your contact list. Time/date Displays the date and time of the message. Forward Sends the message to someone else. Delete Reply Call Reading a Smiley SMS When you choose a message that has a Smiley in it, the Smiley appears on the screen for 3 seconds or until a key is pressed. Then the message appears. After this time the message reads as normal. A message with a smiley attached has a icon if new and a if read. Entering symbols A long press on displays a table showing all the symbols available to you. Scroll down the table to display more symbols. 1 . & * § é ö 2 , ' = è ø 3 " < C ¿ Splash Go into the Extras menu and select Splash. You will see a ...