User manual SHARP 13VT-CR10

TV · VCR COMBINATION MODEL 13VT-CR10 L OPERATION MANUAL L HIGH QUALITY As an ENERGY STAR ® Partner, SHARP has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered trademark. CONTENTS PAGE IMPORTANT INFORMATION ................................................ 2 Supplied Accessories ............................................................. 3 Before Operating Your TV/ VCR Combination ....................... 3 Antenna Connections ............................................................. 4 Description Of Controls .......................................................... 5 Location Of Control's Buttons (Remote Control) .................... 6 Watching A TV Program ........................................................ 7~11 1 POWER 2 VOLUME 3 CHANNEL SELECTION 4 DISPLAY CALL 5 MENU FUNCTIONS 6 TRILINGUAL ON SCREEN DISPLAY 7 EZ SETUP during First Use ......................................... 8 8 WAKE-UP TIMER ........................................................ 8 9 SLEEP TIMER ............................................................. 9 ! VIDEO ADJUST ........................................................... 9 CLOSED CAPTION ..................................................... 9~10 # PRESETTING THE CHANNELS ................................. 10~11 EZ SETUP ................................................................... 10 CH SETTING ............................................................... 11 Tamper Proof Function .......................................................... 12 Setting The Clock ................................................................... 12~13 1 AUTOMATIC CLOCK SETTING .................................. 12 2 MANUAL CLOCK SETTING ........................................ 13 PAGE Playing A Cassette ................................................................. 14~16 ENERGY SAVE BLUE SCREEN AUTO REPEAT S. PICTURE (SUPER PICTURE) INSERTING A VIDEO CASSETTE EJECTING THE CASSETTE TAPE PLAYBACK AUTOMATIC TRACKING CONTROL SYSTEM FULLY AUTOMATIC PLAYBACK FUNCTION STILL PICTURE VIDEO SEARCH FAST FORWARD AND REWIND DPSS (DIGITAL PROGRAM SEARCH SYSTEM) EZ PLAY Recording A TV Program ....................................................... 17 RECORDING SPEEDS CASSETTE ERASE PROTECTION RECORDING A TV PROGRAM TAPE COUNTER Recording With The Timer ..................................................... 18~19 Tape Dubbing ........................................................................ 20 Pre-Service Call Checklist ..................................................... 21 Specifications ......................................................................... 22 Limited Warranty .................................................................... 24 7456 PE 01 13VT-CR10[E].pm65e 1 15/5/01, 7:23 pm Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP TV/ VCR Combination ­ built for outstanding quality, reliability and performance. Every SHARP TV/ VCR Combination set is properly tuned and adjusted for a proper color picture and sound, and has passed through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference. We sincerely hope that you receive the utmost satisfaction and enjoyment from your new SHARP TV/ VCR Combination set for years to come. Please read these instructions carefully, and keep them handy for your future reference. IMPORTANT To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: IMPORTANT INFORMATION Energy efficiency is becoming increasingly important to consumers both in the US and in Canada. ENERGY STAR is a US registered trademark to indicate that a product meets its guidelines for energy efficiency. WHAT IS ENERGY STAR ® TVs and VCRs use energy both when they are on and when they are off. North Americans spend more than $1 billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY STAR ® models will reduce that energy "leakage" by up to 75 percent. Ultimately, this will mean more than $500 million a year in energy savings for consumers. The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution that contributes to global ® warming. If every North American family replaced their TVs and VCRs with ENERGY STAR models, it would reduce carbon dioxide emissions by five million tons every year -- equivalent to eliminating the pollution from more than one million cars. By using ENERGY STAR ® products, you will save money on your electric bills and use less energy. That makes good economic sense and it's good for our environment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO WET LOCATIONS. WARNING OF DEW FORMATION Whenever your TV is moved from a cold to a warm environment, it is important that you plug the unit in, turn the power on and allow it to sit for about 2 hours before attempting to play a tape. This period will allow any dew formation to evaporate. Failure to do so may result in tape and/or video head damage. After the 2 hours evaporation period, you may witness a "snowy" picture for the first few minutes of VCR operation. This picture noise will disappear shortly thereafter. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN. 2 02-03 13VT-CR10[E].pm65e 2 15/5/01, 7:23 pm Supplied Accessories e d PAUSE/STILL TR · · · · TAMPER PROOF PROG MUTE d DPSS e FF MENU VOL CH FLASHBACK POWER REW Infrared Remote Control/Part Number RRMCG1330PESA CONFIRM TIMER ON/OFF 1 4 7 REC TV · VCR COMBINATION DISPLAY TAPE SPEED 100 3 6 9 PLAY COUNTER RESET STOP RETURN INPUT 2 8 ·5 0 ­ SET + Size AA Dry Batteries Before Operating Your TV/ VCR Combination Location · For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not place the back of the television set in a place where free airflow will be restricted. · Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using magnets or any other magnetic substance, such as iron are kept well away from the TV set. Power Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of the polarized plug. Note: · If the set will not be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the POWER BUTTON in the OFF position.) · Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off either the TV or the radio. · If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received due to interference from the TV. L Before using the television, prepare the Remote Control To use the remote control, insert batteries first. Insert the batteries Pull up Battery Cover · With your thumb nail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries (size "AA"). Be sure to match the battery e/d terminals with the e/d marks inside the compartment. 3 02-03 13VT-CR10[E].pm65e 3 15/5/01, 7:23 pm Antenna Connections Antennas · The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems: 1. A 75 ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied). F-type connector 75-ohm coaxial cable (round) 2. A 300 ohm system is a flat "twin-lead" cable that can be attached to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not supplied). 300-ohm twin-lead cable (flat) OUTDOOR ANTENNA CONNECTION · Use one of the following two diagrams if you connect an outdoor antenna. A: Using a VHF/UHF combination outdoor antenna. B: Using separate VHF and/or UHF outdoor antenna. · Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the TV set. A. Combination VHF/UHF Antennas 300/75-ohm ADAPTOR (not supplied) or VHF/UHF ANTENNA B. Separate VHF/UHF Antenna REAR OF TV 300-ohm twin-lead VHF UHF ANTENNA ANTENNA VHF/UHF ANTENNA 75-ohm coaxial cable or 300-ohm twin-lead 300-ohm twin-lead 75-ohm coaxial cable COMBINER (not supplied) IN OUT REAR OF TV CABLE TV (CATV) CONNECTION · A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR. · Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Place your TV on channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. Please note: RF switch equipped with position A/B (not provided) is required. "A" position on the RF switch (not supplied) : You can view all unscrambled channels using the TV's channel keys. "B" position on the RF switch (not supplied) : You can view the scrambled channels via the converter/descrambler using the converter's channel keys. RF switch (not supplied) Two-set signal Cable TV Line splitter (not supplied) IN OUT B IN A OUT Cable TV converter/ descrambler (not supplied) Note: · Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required. 4 04 13VT-CR10[E].pm65e 4 15/5/01, 7:23 pm Description Of Controls FRONT POWER POWER/ WAKE-UP TIMER REC PROGRAM TAMPER TIMER PROOF POWER button SENSOR AREA FOR REMOTE CONTROL VIDEO/AUDIO Input Jacks POWER/ WAKE-UP TIMER REC PROGRAM TAMPER TIMER PROOF TAMPER PROOF indicator PROGRAM TIMER indicator REC indicator POWER indicator VOLUME UP/DOWN buttons CHANNEL UP/DOWN buttons EZ REC PLAY button button PLAY button STOP/EJECT button REW (Reverse Video Search) button FF (Forward Video Search) button REAR ANT/CABLE TERMINAL (75 ) 5 05-07 13VT-CR10[E].pm65e 5 16/5/01, 1:36 pm Location Of Control's Buttons (Remote Control) Infrared Transmitter Window INPUT TV/VIDEO Select POWER ON/OFF CHANNEL SELECT FLASHBACK Returns to previously viewed channel. COUNTER RESET · Used to reset the tape counter. TAPE SPEED · Used to select the recording tape speed. PLAY · Used for tape playback. · Used to cancel the PAUSE/STILL mode and return to normal playback operation. REW · Used to rewind the tape or to conduct Reverse Video Search during playback mode. REC · Used to record a program. ­, + TIMER ON/OFF CONFIRM · Used to confirm the program setting. RETURN SET TV · VCR COMBINATION TIMER ON/OFF DISPLAY · Used to change the On Screen Display. MUTE Press Mutes sound. Press again Restores sound to previous level. Press the MUTE button to enter the CLOSED CAPTION mode automatically if the signal contains CC information. VOLUME UP/DOWN CH POWER INPUT DISPLAY MUTE VOL 1 4 7 FLASHBACK 2 ·5 3 6 9 100 TAPE SPEED TAMPER PROOF 8 0 COUNTER RESET e TR · · · · d CHANNEL UP/DOWN (TRACKING e / d) · Used to select the CHANNEL. · Used to adjust the TRACKING while playing the tape. TAMPER PROOF · Used to block changes to current operating mode. FF · Used to fast forward the tape or to conduct Forward Video Search during playback mode. STOP · Used to stop the tape. PAUSE/STILL · Used to temporarily stop the tape during recording mode. · Used to display a still picture during playback mode. DPSS (e / d) · Press the (e / d) button to search for the index signal and begin playback automatically. PROGRAM · Press the button to enter the Timer Recording mode. MENU · Used to select the menu screen. PLAY REW STOP FF REC PAUSE/STILL d DPSS e ­ + PROG CONFIRM RETURN SET MENU 6 05-07 13VT-CR10[E].pm65e 6 15/5/01, 7:24 pm Watching A TV Program 1 POWER · Press the POWER button to turn on the TV. (The POWER indicator will be lit in RED.) Sound will start instantly and picture will appear 5 to 10 seconds later. · Press the POWER button again to turn off the TV. (The POWER indicator will be turned off.) Press Once* · · · · · · · · · DISPLAY Time and Date Channel Number (Tape Operation Display) (Tape Speed Mode -- SP, LP, EP) (Tape Counter) Channel Number (Tape Operation Display) (Tape Speed Mode -- SP, LP, EP) (Tape Counter) 2 VOLUME · Press the VOL UP (8) button to increase the sound to the desired level, and then release. · Press the VOL DOWN (9) button to decrease the sound level. L To turn the sound off temporarily · Press the MUTE button on the Remote Control to turn the sound off. "MUTE" will appear on the screen to confirm that this feature is in effect. · Press the MUTE button again to restore the sound to its previous level. After about 3 seconds Press Twice Items in ( VCR. · Cleans Display ) will be displayed when a cassette is loaded in the 5 MENU FUNCTIONS L Calling up the Functions (1) Press the MENU button on the Remote Control to call the MENU screen. (2) Press the + or ­ button on the Remote Control to select the desired function mode. Each time that you press the + or ­ button, the " :" mark moves down or up. (3) Press the SET button on the Remote Control to access desired function mode. · To leave the MENU screen, press the MENU button on the Remote Control. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU 3 CHANNEL SELECTION · The desired channel can be selected instantly by pressing the CHANNEL SELECT buttons (0 ~ 9, 100) on the Remote Control, or CHANNEL UP (8)/DOWN (9) buttons on the Remote Control or on the TV. · To select cable channel numbers greater than " 99 ". First press " 100 " button on the Remote Control; then the two other numbers buttons to complete your total channel number selection. · The selected channel number will appear on the screen. Example: (1) To select channel 2 : Press the " 0 " and " 2 " buttons. To select channel 69 : Press the " 6 " and " 9 " buttons. To select channel 125 (CATV mode only) : Press the " 100 ", " 2 " and " 5 " buttons. (2) The memorized channel selection will change in sequence from the low preset channel to the high preset channel when the CH UP (8) button is pressed, and vice versa when the CH DOWN (9) button is pressed after you preset the desired channels into the memory. (MENU screen) 6 TRILINGUAL ON SCREEN DISPLAY L The language for this unit's ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH. L Setting the ON SCREEN DISPLAY Language (1) Select "LANGUAGE" from the MENU screen by pressing + or ­ button, then press the SET button. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU Note: · For channel memory, please refer to page 11. 4 DISPLAY CALL · Pressing the DISPLAY button on the Remote Control will change the display on the screen in the following sequence. (2) Press the + or ­ button to select the language (English, Spanish or French) you wish to display, then press the SET button. LANGUAGE ENGLISH ESPANOL FRANCAIS Note: · When CLOSED CAPTION is turned ON, the ON SCREEN DISPLAY turns off automatically after about 3 seconds. · For CLOSED CAPTION information, please refer to pages 9 ~ 10. SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU 7 05-07 13VT-CR10[E].pm65e 7 15/5/01, 7:51 pm Watching A TV Program (Continued) 7 EZ SETUP during First Use When you turn on the TV for the first time, it will automatically memorize the broadcast channels. Please perform the following before pressing the power button. 1) Insert the batteries into the remote control. (See page 3) 2) Connect the antenna cable to the TV set. (See page 4) 3) Plug in the AC POWER cord to the wall outlet. (1) Press the POWER button on the TV set or on the Remote Control to turn on the TV. The SELECT LANGUAGE mode will be displayed. SELECT LANGUAGE ENGLISH ESPANOL FRANCAIS 8 WAKE-UP TIMER L Setting the Wake-up Timer automatically turns on the TV or VCR at a preset time. (1) Press the MENU button on the Remote Control to call up the MENU screen. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU SELECT +/­ : SET SET (SELECT LANGUAGE mode) (2) Press + or ­ button on the Remote Control to select "ENGLISH", "SPANISH" (ESPAÑOL) or "FRENCH" (FRANÇAIS). Then press + or ­ button to SET LANGUAGE. (3) Press the SET button on the Remote Control to access EZ SETUP mode. SELECT LANGUAGE ENGLISH ESPANOL FRANCAIS (2) Press the + or ­ button on the Remote Control to select "TIMER", and press the SET button. If the clock is not set, the clock set menu will appear. Please set the clock first. (3) Press the + or ­ button to select "WAKE-UP", and press the SET button. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU TIMER WAKE-UP SLEEP 12:00AM OFF OFF SELECT +/­ : SET SET CONNECT ANTENNA OR CABLE. START EZ SETUP? SELECT PREVIOUS 10:00AM SEP.15(FRI) +/-- : SET SET RETURN : QUIT MENU YES NO SET MENU (EZ SETUP mode) (4) Press the SET button on the Remote Control. PLEASE WAIT AUTO PROGRAMMING AIR 2 STOP SET (4) Press the Remote's + or ­ button to select the "hour", then press the SET button. The yellow position will move to the "minute" portion. Again, press the Remote's + or ­ button to select the "minute", then press the SET button. (5) Press the + or ­ button to select turning on the TV or VCR. (6) Press the SET button, then press the MENU button. TIMER WAKE-UP SLEEP 10:20AM OFF OFF SELECT PREVIOUS 10:00AM SEP.15(FRI) +/-- : SET SET RETURN : QUIT MENU TIMER WAKE-UP SLEEP 10:20AM VIDEO ON OFF The tuner will automatically search for the broadcast and cable TV channels. (The CH No. will automatically increase when it appears.) To cancel EZ SETUP, press the SET button on the Remote Control. If you want to SETUP again, please refer to page 10 on SETUP. (5) The "CLOCK SET" screen will be displayed, then set the clock same as step (2), (3) on page 12. CLOCK SET AUTO CLOCK EDS CH MONTH DAY YEAR TIME SELECT PREVIOUS SELECT PREVIOUS 10:00AM SEP.15(FRI) +/-- : SET SET RETURN : QUIT MENU ON AUTO --------:---- The Wake-up Timer indicator changes from red to orange. The Wake-up Timer indicator changes to green in standby mode. Note: · If EZ SETUP does not memorize all the channels in your region, please refer to page 10 for more information on manual memorizing the channels using CHANNEL SETTING. · It may be difficult to use the PRESET function when the broadcast signals are weak, the channel cycle frequency is incorrect or frequency jamming is occuring in the area. Please refer to page 11 for more information on manual memorizing the channel using CHANNEL SETTING. +/­ : SET RETURN : QUIT SET MENU Note: · To clear the Wake-up Timer setting, select "OFF" in step (5). · After the TV and/or VCR is on, and no operation is activated and none of its functions here been used for 2 hour period, the power will shut off as a safety feature. · When you have selected "VIDEO ON" in step (5) and no cassette is loaded the TV turns on instead of the VCR. 8 08-11 13VT-CR10[E].pm65e 8 15/5/01, 7:24 pm Watching A TV Program (Continued) (2) Press the + or ­ button on the Remote Control to select the item you wish to adjust, then press the SET button. (Pressing the + or ­ button moves the " :" mark.) VIDEO ADJUST PICTURE TINT COLOR BRIGHT SHARP F.COLOR RESET SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU PLAY REW STOP FF REC PAUSE/STILL d DPSS e +/­ button TIMER ON/OFF ­ + PROG CONFIRM RETURN SET MENU MENU button RETURN button TV · VCR COMBINATION (3) Press the + or ­ button to Example: adjust the "brightness" to Adjusting the "brightness". a favorite picture. (4) Press the SET button. The screen will return to the (2) above. · To continue any additional adjustment, repeat the steps from (2) to (4) above. (5) Press the MENU button anytime to exit VIDEO ADJUST. < Description of Adjustment Items > Selected Item PICTURE + button To increase contrast For more color intensity For more brightness For more sharpness ­ button To decrease contrast For less color intensity For less brightness For less sharpness Cooler picture (Whites bluish) SET button 9 SLEEP TIMER L Setting the Sleep Timer automatically turns off the power at a preset time. (1) Select "TIMER" from the MENU screen, and press the SET button. If the clock is not set, the clock set menu will appear, set the clock first (refer to page 12) (2) Press the + or ­ button to select "SLEEP", and press the SET button. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU BRIGHT + TINT COLOR BRIGHT Skin tones become greenish Skin tones become purplish TIMER WAKE-UP SLEEP 10:20AM VIDEO ON OFF SHARP F. COLOR Warmer picture (Favorite color) (Whites reddish) RESET SELECT PREVIOUS 10:00AM OCT.15(FRI) +/-- : SET SET RETURN : QUIT MENU All Video Adjustments are returned to the factory preset level. (3) Select the desired timer by pressing the + or ­ button, and press the SET button. Each time you press the + or ­ button, the display changes as follows: + button; OFF 30 M. REMAIN 60 M. REMAIN 90 M. REMAIN 120 M. REMAIN ­ button; OFF 120 M. REMAIN 90 M. REMAIN 60 M. REMAIN 30 M. REMAIN CLOSED CAPTION L How to set Closed Caption · Your TV is equipped with an internal closed caption decoder. "Closed Caption" is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subscript on your TV screen as shown below. · Not all the programs and videos will offer closed caption. Please look for the " " symbol to ensure that captions will be shown. · Closed Caption broadcast can be viewed in two modes: CAPTION and TEXT. For each mode, two channels are available, CH1 and CH2: The [CAPTION] mode subscripts dialogues and commentaries of TV dramas and news programs while allowing clear view of the picture. The [TEXT] mode displays over the picture other various information (such as TV program schedule, weather forecast, etc.) that is independent of the TV programs. Note: · The Sleep Timer function is cancelled if "OFF" is selected in the operation step (2). · The Sleep Timer function is cancelled if you turn the set off by pressing the POWER ON/OFF button on the Remote Control or the front panel. ! VIDEO ADJUST (PICTURE, TINT, COLOR, BRIGHT, SHARP, FAVORITE COLOR) (1) Select "VIDEO ADJUST" from the MENU screen and press the SET button. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU 9 08-11 13VT-CR10[E].pm65e 9 15/5/01, 7:24 pm Watching A TV Program (Continued) (1) Press the Remote's MENU button to access the MENU screen. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU d DPSS e +/­ button TIMER ON/OFF ­ + PROG CONFIRM RETURN SET MENU MENU button RETURN button TV · VCR COMBINATION SET button (2) Press + or ­ button to move the " :" mark to "CLOSED CAPTION". MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU # PRESETTING THE CHANNELS L EZ SETUP By operating the channel preset functions, you can preset your TV to the desired channels for viewing. (1) Press the Remote's MENU button to access the MENU mode. (2) Press + or ­ button to move the " :" mark to the "CH SETTING" mode. SET MENU (3) Press the SET button. CLOSED CAPTION MODE DATA CAPTION CH2 MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU SELECT PREVIOUS +/-- : SET RETURN : QUIT (4) Press + or ­ button to move the " :" mark to either "MODE" or "DATA", then press the SET button. CLOSED CAPTION MODE DATA CAPTION CH2 (3) Press the SET button on the Remote Control to access CH SETTING mode. (4) Press the + or ­ button on the Remote Control to move the " :" to "EZ SETUP" mode. CH SETTING EZ SETUP AIR/CABLE CH SEARCH CH MEMORY SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU (CH SETTING mode) (5) Press + or ­ button to change the "CLOSED CAPTION" setting. MODE : CAPTION CLOSED CAPTION MODE DATA CAPTION CH2 (5) Press the SET button on the Remote Control to access EZ SETUP mode. SET MENU CONNECT ANTENNA OR CABLE. START EZ SETUP? TEXT OFF DATA : CH 1 CH 2 (6) Press the SET button. (7) Press the MENU button to exit. SELECT PREVIOUS +/-- : SET RETURN : QUIT YES NO SET MENU (EZ SETUP mode) Note: · When receiving closed caption signals, a white line may appear in place of the captions. This is due to poor signal conditions or problems at the broadcast source, and does not indicate a problem with your TV. · When viewing in TEXT mode, if no TEXT broadcast is being received the screen may become dark and blank. Should this occur, set the Closed Caption mode to "OFF". · If a TV program has Closed Caption and the MUTE button is pressed, the set enters Closed Caption mode automatically. Pressing MUTE again will return the set to its previous condition. · If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the closed captions will disappear momentarily. (6) Press the SET button. The tuner will automatically search for the broadcasting and cable TV channels. (The CH No. will automatically increase when it appears.) To cancel EZ SETUP. Press SET button on the Remote Control. (7) Once EZ SETUP is completed, the smallest channel number memorized will be displayed. PLEASE WAIT AUTO PROGRAMMING AIR 2 STOP SET 2 AIR 10 08-11 13VT-CR10[E].pm65e 10 15/5/01, 7:24 pm Watching A TV Program (Continued) L CH SETTING If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 Selecting the TV Signal mode. (1) Select "CH SETTING" in the MENU screen by pressing + or ­ button, then press the SET button. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU 3 Adding weak or additional channels from TV memory. (1) Select "CH MEMORY" CH MEMORY from the CH SETTING AIR 54 screen by pressing + or ­ ADD button, then press the START SET button. (2) Use either the CH UP/DOWN -- : SET SET (8/9) buttons or the CHA- S E L E C T U S + E / U R N : Q U I T M E N U PREVIO RT NNEL SELECT buttons (0~9, 100) to select the desired channel. The selected channel number will appear on the screen. · If any channel is stored in the memory, the "ADD" is displayed. · If any channel is not stored in the memory, the "ERASE" is displayed. (3) Use the + or ­ to select CH MEMORY "ADD"; confirm that the AIR 54 "ADD" is displayed. If additional channels are to ADD be preset, repeat step (2). START SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU (2) Select "AIR/CABLE" from the CH SETTING screen by pressing + or ­ button, then press the SET button. CH SETTING EZ SETUP AIR/CABLE CH SEARCH CH MEMORY SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU (3) Press the + or ­ button on the Remote Control to select the TV signal mode, then press the SET button. VHF/UHF antenna Cable TV AIR CABLE STD CABLE HRC CABLE IRC AIR/CABLE AIR CABLE STD CABLE HRC CABLE IRC SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU (TV signal mode) (4) Press the SET or MENU key to exit CH MEMORY. Use the CH UP/DOWN (8/9) buttons to assure channel presetting is correct. 4 Erasing unwanted channels from TV memory. 2 Auto-programming broadcast TV channels into memory. (1) Select "CH SEARCH" from the CH SETTING screen by pressing + or ­ button, then press the SET button. CH SETTING EZ SETUP AIR/CABLE CH SEARCH CH MEMORY SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU (2) Press the SET button. The tuner will automatically cycle through available channels in your area and preset them into the memory. If all available channels are of reasonable signal strength and you prefer not to add or erase any channels from memory, presetting is completed. CH SEARCH AIR START 2 PREVIOUS START RETURN : QUIT SET MENU (1) Select "CH MEMORY" from the CH SETTING screen. (2) Select the channel to be erased. (3) Use the + or ­ to select "ERASE"; confirm that the "ERASE" is displayed. If additional channels are to be erased, repeat step (2). (4) Press the SET or MENU key to exit CH MEMORY. Use the CH UP/DOWN (8/9) buttons to assure channel(s) are erased. CH MEMORY AIR ERASE START 54 SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU Note: · Receivable channels of your TV set are: AIR channels -- VHF; 2 through 13, UHF; 14 through 69. CABLE channels -- 1 (HRC and IRC mode only) 2 through 125 (STD, HRC, and IRC) 11 08-11 13VT-CR10[E].pm65e 11 15/5/01, 7:24 pm Tamper Proof Function L Operation Mode Lock · If the TAMPER PROOF Lock is on during operation of this product, the current operation mode will not change until the TAMPER PROOF Lock is released, even if another operation button is pressed. L Power-Off Mode Lock · If the TAMPER PROOF button is pressed to engage the TAMPER PROOF Lock while the POWER button is set to off, the power cannot be turned on even if the POWER button is pressed. Example: Engaging the Tamper Proof Lock during playback. 1 Press and hold down the TAMPER PROOF button on the Remote Control for about 3 seconds. The " TAMPER PROOF" indicator on the front panel of this product will flash, and then remain lit to indicate that the lock is engaged. 2 Regardless of any operation buttons pressed, the current operation mode will not change. The TAMPER PROOF Lock can be disengaged by the following method: · Press the TAMPER PROOF button on the Remote Control for about 3 seconds. The " TAMPER PROOF" indicator on the front panel of this product will flash, and then go out to indicate that the lock is disengaged. POWER INPUT DISPLAY MUTE POWER button VOL 1 4 7 FLASHBACK 2 ·5 3 6 CH 8 0 COUNTER RESET 9 100 TAPE SPEED TAMPER PROOF e · TR · · · d CHANNEL UP/DOWN buttons TAMPER PROOF button PLAY REW STOP FF REC PAUSE/STILL d TIMER ON/OFF DPSS e ­ + PROG CONFIRM RETURN SET MENU MENU button RETURN button TV · VCR COMBINATION SET button Setting The Clock 1 AUTOMATIC CLOCK SETTING · To set the clock automatically, follow the procedure below: (1) Press the MENU button on the Remote Control. Press the +/­ button to move " :" mark to "CLOCK", then press the SET button. (2) The "CLOCK SET" screen will be displayed. Press the +/­ button to select "AUTO CLOCK ON" and press the SET button. MENU TIMER VIDEO ADJUST CLOSED CAPTION FUNCTION CLOCK LANGUAGE CH SETTING SELECT PREVIOUS +/-- : SET RETURN : QUIT SET MENU