User manual SHARP 14J1-GF/SF/21J1-GF/SF

E1 Damage SAFETY PRECAUTIONS Servicing To reduce the risk of electric shock, do not remove the back of the cabinet. This TV set contains dangerous voltage. COLOUR TELEVISION 14J1-GF 21J1-GF 14J1-SF 21J1-SF OPERATION MANUAL Turn off the power and unplug the power cord from the wall outlet immediately if the TV set begins to make any unusual noises or gives off smoke or an unusual smell. Then call your dealer for service. Unstable surface and shocks Do not place this TV set on an unstable cart, stand, shelf, or table. The TV set may fall, causing serious injury to a child or adult, and serious damage to the set. Sharp recommends securing the TV set to a stable surface or wall to prevent the set from falling due to sudden shocks or impact. Power-cord protection To prevent electrical shock, do not subject the AC power cord to damage by bending or twisting it, or by placing heavy items on top of it and do not place the AC power cord under the TV set. If the AC power cord becomes damaged, unplug it from the wall outlet immediately and call your dealer for service. POWER MENU/ PRESET CH VIDEO AUDIO AV-2 IN (21J1-GF/21J1-SF) Please read this operation manual carefully before using the colour television. Moisture To prevent electrical shock, do not use the TV set in an excessively damp place. Water To prevent fire or electrical shock, do not place the TV set near a bathroom, swimming pool or other area where it may become wet. ENGLISH Contents E1 E2 E3 [ SAFETY PRECAUTIONS ] [ ACCESSORIES ] [ BEFORE OPERATING TELEVISION ] · Connecting to an antenna · Connecting to an antenna via a VCR · Rod antenna connection Liquid entry E5 [ BASIC OPERATION ] · Turn on the power · On-screen display language selection · Channel selection · Adjusting volume Object entry Never insert or drop any metallic or inflammable objects into the ventilation openings of the TV set, as this can cause fire, electrical shock, or electrical failure. E9 [ FEATURES ] · Blue screen Do not place a flower vase or anything else containing liquid on the TV set, as liquid spilt on the TV set can cause electrical shock or failure. E10 [ USEFUL FEATURES ] · · · · Channel/Timer display Mute Channel recall TV/Video selection TV Set position Do place the TV set onto an even stand, table or rack which size is bigger than the TV set. If the TV set is put onto a smaller size or uneven stand, table or rack may cause the TV cabinet to distort. Do not put or insert anything between TV set and the stand, table or rack. E6 [ PRESETTING CHANNELS ] · Auto channel tuning · Manual channel tuning Uneven surface and excessive force Television equipment and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn. E11 [ CONNECTIONS ] · Connecting to video equipment E7 [ SETTING AND ADJUSTMENT ] · Channel setting · Picture adjustment E12 [ TROUBLESHOOTING ] E13 [ SPECIFICATIONS ] E4 [ PART NAMES ] · · · · TV set Using headphone Remote control Installing batteries in the remote control unit E8 [ TIMER SETTING ] · Off timer · On timer · Reminder on-screen timer Ventilation Do not place this TV set in a confined area, such as on a bookshelf or in a built-in case. Leave adequate space behind the TV for proper ventilation. Fire prevention To prevent fire, never place any type of candle or naked flames on the top or near the TV set. TINS-C088WJZZ 05P11-MSF E2 ACCESSORIES E4 TV set PART NAMES The following accessories are included with this television. Remote Control Size-AA batteries Operation manual Rod antenna (dipole) with ribbon feeder 300-75 impedance converter (only for 14J1-GF/14J1-SF) E3 BEFORE OPERATING TELEVISION Connecting to an antenna via a VCR TV TV Connecting to an antenna 300-ohm twin-lead flat feeder (not supplied) 75-ohm impedance converter (not supplied) This operation manual is for 14J1-GF, 14J1-SF, 21J1-GF and 21J1-SF. The illustration of 21J1-GF/21J1-SF are used in this operation manual. POWER MENU/ PRESET CH VIDEO AUDIO AV-2 IN (21J1-GF/21J1-SF) Bottom CH VCR 75-ohm coaxial cable (round cable) (not supplied) Standard DIN45325 plug (IEC169-2) Antenna in AV-1 IN OUT AUDIO CAUTION : DANGEROUS VOLTAGE INSIDE AV-1 IN OUT AUDIO TO PREVENT ELECTRIC SHOCK. DO NOT REMOVE COVER. NO UBER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONAL. VIDEO CAUTION : DANGEROUS VOLTAGE INSIDE TO PREVENT ELECTRIC SHOCK. DO NOT REMOVE COVER. NO UBER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONAL. POWER VIDEO To antenna in terminal To RF out terminal Antenna in POWER switch Turns on and off the main power. Power indicator Power can be turned on by the remote control when the indicator is dimly. Infrared sensor window Receives the infrared wave from the remote control. MENU/PRESET CH Headphone jack Use to listen to the audio with headphone. Audio input terminal (AV-2 IN) Connects to a camcorder, video game, etc. Video input terminal (AV-2 IN) Connects to a camcorder, video game, etc. If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325 plug (IEC 169-2), plug it into the antenna jack at the rear of the set. If your outdoor antenna uses a 300-ohm twin-lead flat feeder, connect a 300-ohm to 75-ohm impedance converter and plug it into the antenna jack at the rear of the set. / CH Rod antenna connection Antenna mounting socket Rod Antenna Feeder (1) Insert the rod antenna's base post into the antenna mounting socket until it clicks into position. (2) Connect the feeder to the impedance converter. (3) Plug the impedance converter into the antenna jack at the rear of the set. Antenna jack Impedance Converter · Rod antenna and impedance converter are only included in model 14J1-GF/14J1-SF. MENU/PRESET button Tunes the channels. Used for MENU setup. Channel up/down buttons Selects the channels. Tunes or sets the channels. / Volume up/down buttons Adjusts the volume. Makes adjustments in PRESET. Using headphone Insert headphone plug into headphone jack to listen to audio with headphone. · The audio from the speakers is turned off. [ TV set (Bottom) ] CAUTION : DANGEROUS VOLTAGE INSIDE TO PREVENT ELECTRIC SHOCK. DO NOT REMOVE COVER. NO UBER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONAL. AV-1 IN OUT AUDIO VIDEO (14J1-GF/14J1-SF) · When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR. · If you are using a rod antenna and the signal from TV station is weak or not clear, the picture may not display clearly or properly. In this case, we recommend that you use an outdoor antenna. · To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone jack and before the power is turned on. E4 PART NAMES (Continued) Infrared transmitter window Aim this window at the infrared sensor window on your TV set. TV/VIDEO E5 BASIC OPERATION [ TV Set (Bottom) ] Remote control Turn on the power · When the power indicator is off, press POWER . · When the power indicator lights up dimly, press on the remote control. The power indicator changes to bright and a picture appears. POWER Turns the TV on or to Standby mode. TV/VIDEO Switches between TV broadcasts and A/V input programmes. Power indicator On-screen display language selection TV set [ TV set (Bottom) ] ENGLISH CH Returns to previously viewed channel. 1 4 2 5 8 0 3 6 9 Number buttons / Adjusts the volume. Used for MENU setup. TIMER 7 Switches between one- or two-digit mode channel selection. CH · Press MENU/PRESET for more than two seconds, the language select mode appears. · Press CH / CH to select desired language. · Pressing MENU/PRESET changes the screen as shown below. Language AUTO MANUAL Normal screen MENU/PRESET CH CH CH CH / CH · Press MENU/PRESET until normal screen appears. Calls the TIMER screen. FEATURE Selects the channel. Used for MENU setup. TV/VIDEO Channel selection FEATURE CH-SET TIMER NORMAL PICTURE 1 4 2 5 8 0 3 6 9 1 5 Calls the FEATURE screen. Mutes the sound and restores sound to previous level. ! Using CH / CH 7 CH-SET PICTURE Calls the CH-SETTING screen. TV NORMAL Calls the PICTURE screen. · Press CH and channels change as shown below. 1 / 2 / ... / 98 / 99 / AV1 / AV2 / 0 / 1 / 2 ... · Press CH and channels change as shown below. 1 / 0 / AV2 / AV1 / 99 / 98 / ... / 2 / 1 / 0 ... CH CH CH CH FEATURE CH-SET TIMER NORMAL PICTURE @ With the number buttons (on remote control) Displays the channel and timer settings on the screen. 5 · To select a one-digit channel, such as 5, press . If "5-" is indicated, press to select one-digit input, 5 and then press again. · To select a two-digit channel, such as 15, press 1 to select the two-digit input. Press , and then 5 press . TV Resets all settings. -115 PAL B/G Installing batteries in the remote control unit a With your thumbnail, pull up at the slit to open the battery cover. b Insert two batteries (size AA). c Replace the battery cover. Adjusting volume ! Adjust volume using / . · The volume bar disappears approximately three seconds after the volume has been adjusted. VOLUME 10 · When the power indicator lights up dimly, either CH / CH · Channels that have been skipped cannot be selected by CH · The AV1, AV2 input channels cannot be selected using CH these channels. on the TV can be pressed to turn on the power. CH . / CH on the remote control. Use TV/VIDEO to select / E6 PRESETTING CHANNELS E7 SETTING AND ADJUSTMENT Auto channel tuning Automatically tunes in and presets receivable TV stations. Channel setting Enables individual channel setting. AUTO(B/G) VHF 1 48.25MHz ! Press @ Press MENU/PRESET for more than two seconds. again to display AUTO mode screen. changes the screen as shown below. MANUAL Normal screen AUTO ! Press @ Press CH-SET to call CH-SETTING screen. / CH CH-SETTING POSITION COLOUR SOUND SKIP FINE CH :SELECT :ADJUST CH27 AUTO B/G OFF 168.25MHz TV/VIDEO MENU/PRESET CH to select desired setting. 1 4 2 5 8 0 3 6 9 · Pressing Language MENU/PRESET # Each time you press PAL B/G CH CH # Press / on TV set. 1 [ TV set (Bottom) ] CH / , setting for individual items changes as follows: 7 CH CH · All the TV stations in your area that can be received by the TV set are automatically preset between channels 1 to 99. · The screen shows whatever is on channel 1 when auto channel preset is finished. · POSITION The channel position changes to the higher or lower number. · COLOUR AUTO PAL SECAM N443 FEATURE CH-SET TIMER NORMAL PICTURE CH-SET TV MENU/PRESET · SOUND B/G I D/K Manual channel tuning Enables manual channel tuning to a desired TV station. 1 4 2 5 8 0 TV/VIDEO 3 6 9 ! Press @ Press MENU/PRESET for more than two seconds. twice to display MANUAL mode changes the screen as shown below. MANUAL Normal screen MANUAL(B/G) VHF 1 48.25MHz 7 Number buttons · SKIP ON OFF Channel numbers with a " " mark on the left are set to SKIP. To turn off SKIP, press the number buttons to select the desired channel and then set "SKIP" to "OFF". · FINE The frequency changes to allow fine tuning. CH MENU/PRESET CH CH screen. · Pressing Language MENU/PRESET CH FEATURE CH-SET TIMER NORMAL PICTURE $ Press CH-SET to return to normal screen. CH-SETTING POSITION COLOUR AV1 AUTO AUTO TV # Press $ Press / CH or number buttons to select channel position. CH · When you select AV1, AV2 for the channel position, the CH-SETTING menu changes as shown on the right and the colour mode changes in the following order: AUTO PAL SECAM N443 N358 CH :SELECT :ADJUST / channel position. on TV set to locate channel you wish to preset to current · Search is initiated and when a TV signal is received during the search, the search stops. % Repeat steps 3 and 4 above, to preset channel positions for other broadcasts. ^ Press MENU/PRESET again to display normal screen. · AUTO PRESET stores all receivable channels including those which may be very weak and not clearly visible. To preset only those channels designated for the local viewing region, use MANUAL PRESET. · Switching COLOUR system: Set the system to "AUTO" for normal TV reception. The AUTO mode automatically detects the receiving signal system and changes the reception system of the TV set. When the picture is not stable, switching to an appropriate system may improve the picture quality. · When using FINE, the channel number changes from green to yellow. E7 ! Press @ Press SETTING AND ADJUSTMENT (Continued) PICTURE E8 TIMER SETTING Picture adjustment PICTURE Off timer Automatically turns power off after a set length of time has passed. 50 0 +10 -10 CONTRAST COLOUR BRIGHTNESS TINT SHARPNESS WHITE TEMP to call PICTURE screen. / CH CH to select adjustment items. / . # Adjust using ! Press @ Press # Press off. 50 + TIMER CH to call TIMER screen. / / CH TIMER to select "OFF ". OFF ON POSITION VOLUME --:---:-OFF 0:05 --:-OFF 0:04 to set time for TV to turn TIMER OFF ON POSITION VOLUME 2:30 --:---:-- · Wait for approximately three seconds to return to PICTURE menu. $ Repeat steps 2 and 3 above to adjust other items. % Press PICTURE CONTRAST - · Maximum time that can be preset is 12 hours and 50 minutes. Timer start to count down after setting. OFF 0:03 OFF 0:02 to return to normal screen. $ Press TIMER to return to normal screen. OFF 0:01 OFF 0:00 The following table lists the adjustment items shown in the PICTURE menu and how they change as you press / . TV/VIDEO · Five minutes before the preset length of time expires, the remaining time appears on the screen. · A flashing display of the remaining time appears during the last few seconds. When the preset length of time has passed, the TV set enters the Standby mode. 1 4 2 5 8 0 3 6 9 Flashing Selected item CONTRAST COLOUR BRIGHTNESS TINT SHARPNESS WHITE TEMP Press To decrease contrast For less colour intensity For less brightness To move tint toward red For less sharpness To more reddish background + + + + Press To increase contrast For more colour intensity For more brightness CH TV/VIDEO 7 CH On timer Automatically turns power on after a set length of time has passed. 1 4 7 2 5 8 0 3 6 9 CH CH CH CH FEATURE TIMER NORMAL PICTURE PICTURE To move tint toward green For more sharpness CH-SET NORMAL TV ! Press @ Press # Press on. TIMER to call TIMER screen. / / CH TIMER CH CH to select "ON ". OFF ON POSITION VOLUME --:-8:00 ----:-- CH FEATURE CH-SET TIMER NORMAL PICTURE to set time for TV to turn TIMER OFF ON POSITION VOLUME --:-8:00 CH28 ---:-- To more bluish background TIMER TV *: TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only) · WHITE TEMP can only be adjusted on PICTURE menu. · Maximum time that can be preset is 12 hours and 50 minutes. Timer start to count down after setting. $ Press CH / CH to select "POSITION". % Press / to set the channel. ^ Repeat step 4 to 5 above to select and set the "VOLUME". TIMER OFF ON POSITION VOLUME --:-8:00 CH28 20 --:-- [ TV Set (Bottom) ] & Press * Press TIMER to return to normal screen. to put TV set into Standby mode. Power indicator (Flashing) · Power indicator will flash to indicate On Timer is set. · When the preset length of time setting has passed, the power turns on and a picture appears on the screen. · The ON TIMER speaker volume gradually increases from zero to preset volume. · Pressing NORMAL while a PICTURE selection is displayed, only the selected mode is reset to the standard (factorysetting) position. · Pressing NORMAL while a PICTURE menu screen is displayed will reset all the item of PICTURE menu to the standard (factory-setting) position. · The Off timer is cancelled if the power is turned off or set to the Standby mode using on the remote control or POWER on the TV set, or if the power is otherwise interrupted. · The On Timer is cancelled if the power is turned off using POWER . · If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if no buttons are pressed on the TV set or remote control. E8 TIMER SETTING (Continued) E10 USEFUL FEATURES Reminder on-screen timer Lets you know when a preset length of time has passed by displaying a countdown timer on the screen. This is useful for timer cooking while you watch TV. Channel / Timer display Displays the current channel number, the timer, and other settings on the screen. ! Press @ Press # Press ! Press . TIMER to call TIMER screen. / / CH TIMER OFF ON POSITION VOLUME --:---:---:-1 4 2 5 8 0 TV/VIDEO CH to select " ". to set time. · The time remaining on the Off timer, On timer, and Reminder appears on the screen. CH CH 3 6 9 OFF ON 7 TIMER OFF ON POSITION VOLUME --:---:-1:50 FEATURE CH-SET · When no timer is set, the channel number, colour and sound system appear on the screen. again to clear these current settings · Press display on the screen. 2:30 8:00 1:50 · Maximum time that can be preset is 12 hours and 50 minutes. · The right example shows that the Reminder will be activated after one hour and 50 minutes. CH CH PAL B/G 5 FEATURE TIMER NORMAL PICTURE TIMER $ Press @ Press TIMER to return to normal screen. 0:05 0:04