Detailed instructions for use are in the User's Guide.
5
INSTALLATION IS COMPLETE!
SAFETY WARNINGS 1 Select a well-ventilated location. 2 Avoid exposing this set to direct sunlight, dust, heat sources or moisture. 3 Do not place objects containing liquids on top of the TV. 4 Never open the back cover. 5 Never insert objects into the TV. 6 Take care not to damage the power cord. 7 Keep the TV from strongly magnetic objects.
56FW-53H
COLOUR TELEVISION
SHARP ELECTRONICA ESPAÑA, S. A.
QUICK S TA R T GUIDE
for easy installation
q q
NOW LET'S GET STARTED
Refer to the Operation Manual for: Channel selection .................................. Picture adjustments............................... Audio adjustments.................................. Timer settings (ON/OFF Timer)............... Child lock................................................ Menu structures...................................... Teletext mode......................................... P.11 P.12 P.16 P.20 P.22 P.24 P.25
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester M40 5BE
Fitting the batteries into the remote control Connecting the aerial cable Tuning the TV channels
q
A scart lead (not supplied) is recommended for use with this TV, to obtain the best communication between your TV and VCR, please refer to page-37 of the operation manual.
Using this installation guide should enable you to set up your TV in less than 15 minutes - - - - - Please refer to your operation manual for more tips and advice
PRINTED IN SPAIN TINS-6774BMN3 5/01 If problems persist contact the SHARP (office hours) Helpline on tel:08705 274277 (or (01) 676 0648 if telephoning from Ireland) and/or WEB-SITE: www.sharp.co.uk/support
1
SUPPLIED ACCESSORIES
2
TYPICAL CONNECTIONS
Back of TV
4
AUTO INSTALLATION
The AUTO INSTALLATION function will tune all available TV stations into your TV. The TV is ready to preset automatically all local channels for you. If you do not intend to use your TV with a VCR then please proceed to stage 4.2
56FW-53H
COLOUR TELEVISION OPERATION MANUAL
VCR 1 If the TV is being used with a VCR, turn on the VCR and play back a p re - re c o rd e d t a p e .
Printed on recycled paper
Operation Manual Remote control
2 Now, press any button on the TV remote control and follow the instructions on the screen, to start Auto Channel Preset. This tuning process may take several minutes to perform.
Pr 01
Automatic searching and sorting Press the menu button to cancel
Type-AA Dry Batteries
Check List:
q
Is the TV connected to the mains? the aerial connected to the TV?
3 After searching has finished the channels will be stored in the following order: Pr01 - BBC1 Pr02 - BBC2 Pr03 - ITV Pr04 - CH4 The "Stored programmes" menu will appear on screen and you can change the order of the channels and change or give the channels a four letter name. If you wish to rename the channels, or change the order, refer to the pages 9 and 10, chapter Stored programmes in the Operation Manual
Fitting the batteries
1. With your thumb nail, pull up the slit as shown.
q Is
3
TURN TV ON FOR THE FIRST TIME
TV set
1 Press the main power button (®) to start the AUTO INSTALLATION.
2. Insert the two batteries as shown.
2 The red power indicator will light.
Power indicator Main power button
3 The AUTO INSTALLATION message will appear on your TV screen.
If you wish exit from the menu, press the BLUE button. Note: If you need to repeat the "AUTO INSTALLATION", please refer to the relevant section on page 29 of the operation manual.
3. Replace the cover.
...
