Accessories MODEL QT-V5E DVD/CD SYSTEM This Quick Start Guide will help you to correctly install and operate your system. Remote control 1 AC power lead 1 "AAA" size battery (UM-4, R03, HP-16 or similar) 2 If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0301 Yellow "AA" size battery (UM/SUM-3, R6, HP-7 or similar) 2 Video cable 1 Audio cable 1 Connecting to a TV To video input socket TV To audio input sockets Video cable (supplied) Video signal Audio cable (supplied) Audio signal Inserting memory batteries 1 Open the battery compartment. 2 Insert the 2 supplied "AA" size batteries (UM/SUM-3, R6, HP-7 or similar) into the battery compartment. 3 Close the battery compartment. 1 2 Using with the AC power lead After checking all the connections, connect the AC power lead to the AC power input socket, then to the wall socket. Before connecting the AC power lead, remove the cardboard from the AC power plug. Battery installation for the remote control 1 2 3 Remove the battery cover. Insert the 2 supplied "AAA" size batteries (UM-4, R03, HP-16 or similar) according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them toward the battery terminals. Replace the cover. Wall socket (AC 230 - 240 V, 50 Hz) 9HX8043210003A 04F Z AO 1 To turn the power on 1 2 Set the ON/STAND-BY switch on the main unit to ON. When the ON/STAND-BY switch on the main unit is set to ON, you can also turn the power on or put the unit in the stand-by mode using the ON/STAND-BY button on the remote control. After use: When not using this unit, set the ON/STAND-BY switch on the main unit to . DVD operation DVD playback 1 2 3 4 Press the OPEN/CLOSE open the disc tray. button to Place the disc on the disc tray, label side up. Press the OPEN/CLOSE close the disc tray. button to Label side Disc tray Discs supporting auto start will start to play once you close the disc tray even if you do not press the PLAY/PAUSE button. If playback does not start, press the PLAY/PAUSE button. To interrupt playback Press the PLAY/PAUSE button. To locate the beginning chapter/track (skip) Whilst a disc is playing, press the or button. of a To stop playback Press the STOP button twice. Resume play 1. Whilst the disc is playing, press the STOP button. 2. To resume playback, press the PLAY/PAUSE button. Fast forward/Fast reverse (search) 1. Whilst a disc is playing, press the or button. 2. Press the PLAY/PAUSE to return to normal playback. button Listening to the radio 1 2 Press the TUNER/BAND button repeatedly to select the desired frequency band (FM or AM). Press the or button to tune in to the desired station. When the or button is pressed for more than 0.5 seconds, scanning starts automatically and the tuner stops at the first receivable broadcast station. FM Stereo Receiving Indicator If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the ON/STAND-BY switch on the main unit to and turn the power on again. 2 If the unit is not restored to normal operation, unplug it for a while, then reconnect the power. Maintenance Routine maintenance is required for continued optimum performance, refer to the operation manual (page 39). 9HX8043210003A ...