User manual SIEMENS GIGASET AS150

EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. We hope you enjoy your Gigaset. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschäft der Siemens AG fortführte. Etwaige Erklärungen der Siemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklärungen der Gigaset Communications GmbH zu verstehen. Wir wünschen Ihnen viel Freude mit Ihrem Gigaset. Chère Cliente, Cher Client, la société Gigaset Communications GmbH succède en droit à Siemens Home and Office Communication Devices GmbH & Co. KG (SHC) qui poursuivait elle-même les activités Gigaset de Siemens AG. Donc les éventuelles explications de Siemens AG ou de SHC figurant dans les modes d'emploi doivent être comprises comme des explications de Gigaset Communications GmbH. Nous vous souhaitons beaucoup d'agrément avec votre Gigaset. Gentile cliente, la Gigaset Communications GmbH è successore della Siemens Home and Office Communication Devices GmbH & Co. KG (SHC) che a sua volta ha proseguito l'attività della Siemens AG. Eventuali dichiarazioni della Siemens AG o della SHC nei manuali d'istruzione, vanno pertanto intese come dichiarazioni della Gigaset Communications GmbH. Le auguriamo tanta soddisfazione con il vostro Gigaset. Geachte klant, Gigaset Communications GmbH is de rechtsopvolger van Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), de onderneming die de Gigaset-activiteiten van Siemens AG heeft overgenomen. Eventuele uitspraken of mededelingen van Siemens AG of SHC in de gebruiksaanwijzingen dienen daarom als mededelingen van Gigaset Communications GmbH te worden gezien. Wij wensen u veel plezier met uw Gigaset. Estimado cliente, la Gigaset Communications GmbH es derechohabiente de la Siemens Home and Office Communication Devices GmbH & Co. KG (SHC) que por su parte continuó el negocio Gigaset de la Siemens AG. Las posibles declaraciones de la Siemens AG o de la SHC en las instrucciones de uso se deben entender por lo tanto como declaraciones de la Gigaset Communications GmbH. Le deseamos que disfrute con su Gigaset. SCaros clientes, Gigaset Communications GmbH é a sucessora legal da Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), que, por sua vez, deu continuidade ao sector de negócios Gigaset, da Siemens AG. Quaisquer declarações por parte da Siemens AG ou da SHC encontradas nos manuais de utilização deverão, portanto, ser consideradas como declarações da Gigaset Communications GmbH. Desejamos que tenham bons momentos com o seu Gigaset. DA Kære Kunde, Gigaset Communications GmbH er retlig efterfølger til Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), som fra deres side videreførte Siemens AGs Gigaset-forretninger. Siemens AGs eller SHCs eventuelle forklaringer i betjeningsvejledningerne skal derfor forstås som Gigaset Communications GmbHs forklaringer. Vi håber, du får meget glæde af din Gigaset. Arvoisa asiakkaamme, Gigaset Communications GmbH on Siemens Home and Office Communication Devices GmbH & Co. KG (SHC)-yrityksen oikeudenomistaja, joka jatkoi puolestaan Siemens AG:n Gigaset-liiketoimintaa. Käyttöoppaissa mahdollisesti esiintyvät Siemens AG:n tai SHC:n selosteet on tämän vuoksi ymmärrettävä Gigaset Communications GmbH:n selosteina. Toivotamme Teille paljon iloa Gigaset-laitteestanne. Kära kund, Gigaset Communications GmbH övertar rättigheterna från Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), som bedrev Gigaset-verksamheten efter Siemens AG. Alla förklaringar från Siemens AG eller SHC i användarhandboken gäller därför som förklaringar från Gigaset Communications GmbH. Vi önskar dig mycket nöje med din Gigaset. Kjære kunde, Gigaset Communications GmbH er rettslig etterfølger etter Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), som i sin tur videreførte Gigaset-geskjeften i Siemens AG. Eventuelle meddelelser fra Siemens AG eller SHC i bruksanvisningene er derfor å forstå som meddelelser fra Gigaset Communications GmbH. Vi håper du får stor glede av din Gigaset-enhet. , , Gigaset Communications GmbH Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), Gigaset Siemens AG. Siemens AG SHC Gigaset Communications GmbH. Gigaset. Postovani korisnici, Gigaset Communications GmbH pravni je sljednik tvrtke Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), koji je nastavio Gigaset poslovanje tvrtke Siemens AG. Zato sve izjave tvrtke Siemens AG ili SHC koje se nalaze u uputama za upotrebu treba tumaciti kao izjave tvrtke Gigaset Communications GmbH. Nadamo se da sa zadovoljstvom koristite svoj Gigaset ureaj. Spostovani kupec! Podjetje Gigaset Communications GmbH je pravni naslednik podjetja Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), ki nadaljuje dejavnost znamke Gigaset podjetja Siemens AG. Vse izjave podjetja Siemens AG ali SHC v prirocnikih za uporabnike torej veljajo kot izjave podjetja Gigaset Communications GmbH. Zelimo vam veliko uzitkov ob uporabi naprave Gigaset. FI DE FR SV NO IT EL NL HR ES SL PT Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a trademark licensee of Siemens AG © Gigaset Communications GmbH 2008 All rights reserved. Subject to availability. Rights of modifications reserved. www.gigaset.com CS Vázení zákazníci, spolecnost Gigaset Communications GmbH je právním nástupcem spolecnosti Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), která dále pejala segment produkt Gigaset spolecnosti Siemens AG. Jakékoli prohlásení spolecnosti Siemens AG nebo SHC, které naleznete v uzivatelských píruckách, je teba povazovat za prohlásení spolecnosti Gigaset Communications GmbH. Doufáme, ze jste s produkty Gigaset spokojeni. Vázený zákazník, Spolocnos Gigaset Communications GmbH je právnym nástupcom spolocnosti Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), ktorá zasa pokracovala v cinnosti divízie Gigaset spolocnosti Siemens AG. Z tohto dôvodu je potrebné vsetky vyhlásenia spolocnosti Siemens AG alebo SHC, ktoré sa nachádzajú v pouzívateských príruckách, chápa ako vyhlásenia spolocnosti Gigaset Communications GmbH. Veríme, ze budete so zariadením Gigaset spokojní. Stimate client, Gigaset Communications GmbH este succesorul legal al companiei Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), care, la rândul su, a continuat activitatea companiei Gigaset a Siemens AG. Orice afirmaii efectuate de Siemens AG sau SHC i incluse în ghidurile de utilizare vor fi, prin urmare, considerate a aparine Gigaset Communications GmbH. Sperm ca produsele Gigaset s fie la înlimea dorinelor dvs. Postovani potrosacu, Gigaset Communications GmbH je pravni naslednik kompanije Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), kroz koju je nastavljeno poslovanje kompanije Gigaset kao dela Siemens AG. Stoga sve izjave od strane Siemens AG ili SHC koje se mogu nai u korisnickim uputstvima treba tumaciti kao izjave kompanije Gigaset Communications GmbH. Nadamo se da ete uzivati u korisenju svog Gigaset ureaja. , Gigaset Communications GmbH Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), Siemens AG. , Siemens AG SHC, , Gigaset Communications GmbH. Gigaset. Tisztelt Vásárló! A Siemens Home and Communication Devices GmbH & Co. KG (SHC) törvényes jogutódja a Gigaset Communications GmbH, amely a Siemens AG Gigaset üzletágának utódja. Ebbl következen a Siemens AG vagy az SHC felhasználói kézikönyveiben található bármely kijelentést a Gigaset Communications GmbH kijelentésének kell tekinteni. Reméljük, megelégedéssel használja Gigaset készülékét. PL SK Szanowny Kliencie, Firma Gigaset Communications GmbH jest spadkobierc prawnym firmy Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), która z kolei przejla segment produktów Gigaset od firmy Siemens AG. Wszelkie owiadczenia firm Siemens AG i SHC, które mona znale w instrukcjach obslugi, naley traktowa jako owiadczenia firmy Gigaset Communications GmbH. yczymy wiele przyjemnoci z korzystania z produktów Gigaset. Sayin Müterimiz, Gigaset Communications GmbH, Siemens AG'nin Gigaset iletmesini yürüten Siemens Home and Office Communication Devices GmbH & Co. KG (SHC)'nin yasal halefidir. Kullanma kilavuzlarinda bulunan ve Siemens AG veya SHC tarafindan yapilan bildiriler Gigaset Communications GmbH tarafindan yapilmi bildiriler olarak algilanmalidir. Gigaset'ten memnun kalmanizi ümit ediyoruz. ! Gigaset Communications GmbH Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), , , Gigaset Siemens AG. , Siemens AG SHC , Gigaset Communications GmbH. , Gigaset . TR RO RU SR BG HU Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a trademark licensee of Siemens AG © Gigaset Communications GmbH 2008 All rights reserved. Subject to availability. Rights of modifications reserved. www.gigaset.com 1 Gigaset AS150 AS15 1 2 2 3 4 5 3 6 / 4 7 / 5 ( ) 8 6 ( ) 9 R - (Flash) - ( ) 7 10 11 8 1 1 22-35 Þ Ü INT V / (paging) (. 5/ . 6) : . Þ Ü INT MENU 9 10 11 t s u v ß O (. 4). (. 4). (. 5). /. / . / . . . W . . . , ! ( ) , . (. 7). . (. . ). . , ( ). .. . (. 8). (. . ). Gigaset . $ , . 2002/96/ . . . , , . (. 3), ! . 2 1: . W 1 2 1 (230 V) 2, . . . (. ) . , : 3-4 /EURO CTR37. , . , , . , , , . . . / ' . 3: . . . . 5. 2: , . , . / . . , . . . . , (. 10). . , (" ", . 8) (Customer Care, . 8). , ( ) . . ( ). , 3 / a. , . : 1 2 (CLIP) . (CLI). / "" , . : R . Ø. : R . , . , ! , , , , . . . . INT . "" ( ). : a . / . : h. : : 20 . : 8 ( 12 ), . . , ("Call-by-Call") .. h C, MENU. : / . ~ ( ) . ( c [ ] .) t s. / : a. () (. , , . 10). ¢c. C. , : c. " " (. 6) / . / / , , . : h/C¢MENU¢L ¢OK. 4 / h/C¢ MENU ¢ / M Û (. , . 10). : 30 . Û . . . : 02/08 A , ~O ~O . : . : (2­9), . ( ). a /: . . 7. : . . 1. . h ~ s c . . . . Û s . . . OK . .. I ¢c. s MENU. . Þ ( ) MENU. : Û ¢ E (. )¢ : . ¢ / : Þ ¢MENU¢L ¢OK. ¢ : Þ E c. ¢ : Û E c. ¢ ¢ 5 . Gigaset AS15 . . INT¢ OK¢ PIN ( : 0000) ¢ OK ¢ ? ¢ OK ¢ a. ¢ ¢ MENU ¢ . . : Gigaset AS15 Gigaset AS15, . , . , . (1­4). , , . . "2". 1 4 ( ), 4 . . INT . "<". : , . . 2. : . : . ... ~ ... : Gigaset AS15 1. : MENU PIN ( : 0000) OK. ¢ ¢ ¢ P ... . a 2. : 60 PI , /paging (. 1) 3 . . / . : INT ( )¢ c ( ). : MENU OK. . : INT c ( ) a . ( ) a. , . : : 1. : . 2. : / paging (. 1) 3 . . ¢ ¢ ¢ ¢ ¢ ¢ Gigaset AS15 : 6 . ( ). : . . MENU O2 (. . Q1 ): ¢ ¢ / MENU (= ). ¢ ¢ ¢ . . c . . . : a . a, . . . Q Q Q Q Q 1 2 I 4 5 I Q Q Q Q L M N O T / , , c. : MENU O 1 1. : MENU O 1 Q. ¢ ¢ ("Paging") , . ( 2 ) / paging (. 1). . : / paging ( ) c . /paging 2 , . . / , , . : MENU O 4 Q. : MENU O 4 1. ¢ ¢ , , , . MENU i ¢ OI ¢ ? ¢ OK. 7 , c : MENU NO1L : 1 = 1 , 2 = 3 , 3 = 7 , 4 = 2,5 OK. : 2 Watt. : 3 Watt. : 2 Watt. ¢ ¢ / / / / DECT GAP 300 , 50 230 V ~/50 Hz +5 °C +45 °C 155 x 56 x 28 ( ) 85 x 113 x 68 ( x x ) 116 ( ) 94 NiMH, 2xAAA V30145-K1310-X383 410 mAh 10 , 5 9 130 (5) ¢ ¢ R ( ) , (. ): MENU NO12 : 1 = 800 ms, ¢ ¢ 2 = 1600 ms, 3 = 3200 ms ¢ OK. ¢ : S 2 . "P". . 1x 2x 0 1 3x - 4x | 5x ? 6x _ Q 1 R P + ¤ , ( ) . . . # ( : j) * / ( ) , 8 ! : 1 . / . . (. 2) PIN 0000. , Paging, , 2 Paging, . . . . 2. . 3. 72 , (: , , ). 4 PIN . PIN . PIN , . . , , www.siemens.com/gigasetcustomercare , . . (Customer Care) ! online Internet : http://www.siemens.com/gigasetcustomercare 24 . , ( ). . vik u SIEMENS. 801 11 11 11 6 (0,026 Euro) . , . a . 5 . . / (. 2). R . 2 , (. 3). " ". , . . . . (. 5). . (. 2). (. 2). 9 . . Siemens Home and Office Communication Devices GmbH & Co. KG 1999/5/EC. 1999/ 5/EC Internet: http://www.siemens.com/gigasetdocs. Siemens Home and Office Communication Devices GmbH & Co. KG, Schlavenhorst 66, D-46395 Bocholt, Germany. , ' , , . ( Siemens , , "" . , , . , , , , , , . , , , , ' , , , .) . ' , Siemens . , , , . , Siemens. . , () , : , / 24 , Siemens, ' , , , . , (.. , , ), . , / . (.. , , ). , , , , . . . Siemens, Siemens. . 10 . . MENU ( ), OK. 1 1-2 1-4 : a. : t s, E , . .: MENU I 1 2 . . , . . , . MENU : , . 2 3 2-2 2-3 3-1 -/IA 5 + "Crescendo" + 10 3-1-1 3-1-2 3-1-3 3-2 3-3 3-4 PIN : : 12 24 PIN ( : 0000) ( PIN , ) 3-4-1 3-4-2 3-4-3 -FLASH / / () , . M s 3-5 3-5-1 4 4-1 --> ( , 1 ). : , . , . 5 1 Gigaset AS150 english Handset AS15 Base 1 Charge status of the battery pack 2 Internal number of the handset 3 Display keys 4 Talk key 5 Directory key 6 End call and On/Off key 7 Ringer on/off (long press) 8 keypad lock (long press) 9 Recall key - Confer (Flash) - Dial pause (long press) 10 Microphone 11 Speed dial list key 1 2 V 22-35 Þ Ü INT MENU 1 Register/Paging key (page 4/page 5) Display keys: Pressing the keys launches whichever function appears above them in the display. Display icon Meaning when pressed Open the last number redial list (page 4). Open the calls or network mailbox list (page 4). Open the list of registered handsets (page 5). Open main menu/submenu. Scroll up/down, or adjust volume. Move cursor to the left/right. Backspace deletes one character at a time. Confirm menu function or store an entry. 3 4 5 6 Þ Ü INT MENU t 7 8 9 10 11 u and s ß OK and v Safety precautions W Read this manual and the safety precautions carefully before use. Explain their contents to your children, and the potential hazards associated with using the telephone. Only use the mains unit supplied. Do not use the telephone in environments subject to explosion hazard (e.g. auto paint shops). If you give your Gigaset to someone else, make sure you also give them the operating manual. $ Fit only the approved rechargeable battery pack! Never use a conventional (non-rechargeable) battery pack as this could damage your health and cause injury. Use the battery pack as directed in these instructions (page 6). The operation of medical appliances may be affected. Be aware of the technical conditions within the particular environment (e.g. doctor's practice). The handset may cause an intrusive 'hum' in hearing aids. Do not hold the handset against your ear while it is ringing (incoming call). Do not install the phone in a bathroom or shower room as the handset and base are not splash-proof. (page 6) All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2002/96/EC. The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human health. It is a precondition for reuse and recycling of used electrical and electronic equipment. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. Do not pollute the environment. Emergency numbers cannot be dialled if the keypad lock (page 3) is activated! Not all of the functions described in this manual are available in all countries. 2 Setting up the telephone for use Step 1: Connecting the base . W 1 2 Place the battery leads in the cable guides so that the battery cover cannot catch on the leads and damage them when it is closed. Only insert the recommended rechargeable battery pack, i.e. never use a normal battery pack as this could damage your health and cause injury. Never use non-Siemens battery chargers as this could damage the battery pack. Only place the handset in the base/ charging cradle that is intended for it. Connect the phone jack with the phone cord 1 and the mains units (230 V) with the power cord 2 as shown. Place the cords in the cord recesses. The two cords must be plugged in at all times. Only use the supplied mains unit (see the bottom of the base) and the supplied telephone cable. If you ever purchase another phone cord from a store, ensure that the phone conductors are correctly connected: 3-4 connection of the telephone conductors/EURO CTR37. Step 3: Registering the handset to the base and charging the battery pack Place your handset in the base with the display facing forwards. The handset will now register automatically to the base. For procedure see page 4. Charging the battery pack To charge the battery pack, leave the handset in the base for approx. ten hours. The battery pack is now fully charged. The charge status of the battery pack is correctly displayed only after uninterrupted charging/discharging. You should not therefore interrupt the charging process. Charging is electronically controlled to prevent overcharging. The battery pack heats up during charging; this is normal and not dangerous. After a time the charge capacity of the pack will decrease for technical reasons. You must set the date and time to ensure that the times of calls are logged correctly (page 9). Your telephone is now ready to use. If you have any queries about the use of your telephone, please read the tips under "Questions and answers" (page 7) or contact our service (Customer Care, page 7). Step 2: Setting up the handset Fitting the battery pack To open the battery compartment, push the tongue on the battery cover inwards (see picture on left) and lift off the cover. Fit the left side of the battery pack under the clips then press down on the right side so that the pack snaps home. Plug the jack firmly into the socket (see picture on right). To close the battery compartment, position the cover and press until it snaps home. 3 Activating/deactivating the handset Press the 'end call' key a and hold. If you place a deactivated handset in the base station or charger, it will automatically activate. Muting You can mute you handset when making external calls. The other party hears a wait melody. You do not hear your caller either. Press the display key INT. The call is 'held' (wait melody). To cancel the function: Press a briefly. Activating/deactivating the keypad lock You can "lock" the keys on the handset to protect the keypad against inadvertent activation. To activate: press the hash key R and hold. The display shows the icon Ø. To deactivate: press the hash key R and hold. The keypad lock deactivates automatically when you receive a call and activates again after the call. When the keypad lock is active you cannot even call emergency numbers! Using the directory and other lists Directory and speed dial list These two lists are used in the same way. To open the directory: Press h. To open the speed dial list: Press C. Directory: Can store up to 20 numbers and associated names. Speed dial list: Can store up to 8 numbers (12 digits max.), e.g. private phone numbers, prefixes of network providers ("Call-by-Call") etc. Press the h or C key to open the required list then press MENU. The following functions are available: EDIT ENTRY NEW ENTRY SHOW ENTRY DELETE Making calls Making external calls/Ending a call External calls are calls using the public telephone network. ~ (Enter the number) The number is dialled. (Or you can first press c [dial tone] and then enter the number.) During the call you can adjust the earpiece volume with t and s. End the call/cancel dialling: Press the end call key a. You can automatically insert a network provider prefix before any number (see Menu Tree, PRESELECT, page 9). ¢c. Add/edit number and use to dial Save new phone number Show/edit number Delete a single entry Answering a call Your handset rings and you wish to take the call: Press the talk key c. If "Auto Answer" is active (page 5) just lift the handset out of its base/charging cradle. Clear the list: h/C¢MENU¢L ¢OK. Storing a number in the directory/speed dial list h/C¢ MENU ¢ NEW ENTRY ~OK ~OK Enter phone number and confirm. Directory: Enter name and confirm. Speed dial: Enter the digit of the required speed dial key (2­9), then enter the name and confirm. Long press (back to idle status). Calling Line Identification When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory . Requirements: 1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). The display shows if you have not requested CLIP, WITHHELD if the caller has withheld CLI, or UNAVAILABLE if it has not been requested. a Table for text/numerical entry: see page 6. Cursor control: see page 1. Dialling with the directory h ~ s c Open the directory. Enter the first letter of the name. If there is more then one entry, select the name. Press the talk key. 4 Speed dialling Example: Press key I long ¢c. Last number redial list This list contains the five last dialled numbers. Þ (open the list) MENU. The following functions are available: Registering and de-registering handsets You can register up to four handsets on your base station. A Gigaset AS15 handset that is not yet registered on a base is registered automatically. Other handsets must be registered manually. ¢ EDIT ENTRY COPY TO DIR Add/edit number and use to dial Clear the list: Þ ¢MENU¢L ¢OK. ¢ Store number in directory Automatic registering: Gigaset handset AS15 Any Gigaset AS15 handset that is not registered to a base can be registered automatically. To register a handset for the first time, place it in the base with the display facing forward. Registering takes about 1 minute; a number of icons flash in the display. The handset is automatically assigned the next available internal number (1­4). This number appears in the top left of the display after successful registering, e.g. "2". If all of the internal numbers 1 to 4 are used up (i.e. four handsets have been registered), handset number 4 is de-registered and overwritten. Dialling a number You can select a number from the last number redial list: Þ Select an entry c. ¢ Calls list/Select services list Press the display key Û to open the caller list and select services list (see Menu Tree, page 9). Calls list: The number of the last 30 missed calls are stored. When the phone is in idle status, new missed calls are indicated by a flashing Û . Example of how the calls list appears: CALLS 02/08 Number of old, read entries Number of new entries Manual registering: Gigaset handset AS15 Opening the calls list and selecting an entry You can view entries you have already read. 1. On the handset: MENU REGISTER HS enter your system PIN (default is 0000) OK. The display shows REGISTER HS during the registration procedure. 2. On the base: Within 60 sec. of entering the system PIN, press the register/paging key on the front of the base (page 1) and hold for approx. 3 sec. The registration process starts. ¢ ¢ ¢ Û s CALLS s Open calls list. OK Manual registering: Other handsets Other handsets are registered as follows: 1. On the handset: Start to register your handset as described in its operating instructions. 2. On the base: Press the register/paging key on the front of the base (page 1) for approx. 3 sec. The registration process starts. Confirm. The last incoming call is displayed. Select entry. Û Select an entry (see above)¢ MENU. The following functions are available: DELETE COPY TO DIR TIME STATUS DELETE LIST Using the calls list ¢ De-registering handsets Delete an individual number Store a number in the directory. Enter name Establish date and time of a call Read or not read Delete complete calls list Calling back a caller from the calls list: Û Select an entry c. ¢ ¢ The internal number disappears from the de-registered handset. Handsets that have not been deregistered retain their internal number. ¢ ¢ ¢ OK¢ Enter the system PIN (default is 0000) ¢ OK ¢ DE-REGISTER? ¢ OK ¢ a. DE-REG H/SET You can de-register another handset from any registered Gigaset AS15 handset as follows: INT¢ Select handset MENU 5 Using several handsets Internal calls Internal calls are no-cost calls to other handsets that are registered to the same base. INT If one of the internal parties presses the end call key a, a signal tone sounds. This does not affect the connection between the other handset and the external caller. Looking for a handset ("paging") If you have mislaid your handset you can page it with the help of the base. To do this, briefly (2 seconds max.) press the register/paging key on the front of the base (page 1). All handsets will ring at the same time. End paging: Briefly press the registration/paging key (on the base) or the talk key c on any handset. Press the display key. Your own handset is marked "<". Call a single handset: Enter number of handset, e.g. 2. Calling all handsets: Press the star key. Ending the call: Press the end call key. either ... ~ or ... P ... then a i Pressing the registration/paging key for more than 2 seconds puts the base into registration mode. The handsets will not ring in this case. Internal conference/Call connecting You are in conversation with an external caller. To confer: INT (the external party hears the wait melody)¢ Select a handset c (confer with internal party). End: MENU GO BACK OK. You are reconnected with the external caller. Or to connect the call: INT Select a handset c (announce the call if required) a Press the end call key. You can also press the end call key a immediately (without announcing the call). If the internal party does not answer or is busy the call will come back to you automatically. Handset settings Changing the display language You can view the display texts in different languages. MENU O2 Select language (e.g. digit combination Q1 for German): ¢ ¢ ¢ ¢ ¢ ¢ ¢ ¢ Q Q Q Q Q 1 2 I 4 5 German English French Italian Dutch Q Q Q Q L M N O Spanish Portuguese Turkish Greek Barging in on an external call You are conducting an external call. An internal party can 'barge in' on your call and join in the conversation (all parties hear a beep). Requirement: The BARGE IN function is activated. Activating/deactivating Auto Answer When you get a call you can simply lift the handset out of the base or charger without having to press the talk key c. To activate: MENU O 1 1. To deactivate: MENU O 1 Q. Activating/deactivating internal barge-in MENU BASE SET BARGE IN ( = on). ¢ ¢ ADD FEATURES ¢ ¢ ¢