s s Issued by BenQ Mobile GmbH & Co. OHG Haidenauplatz 1 D-81667 Munich © BenQ Mobile GmbH & Co. OHG 2005 All rights reserved. Subject to availability. Rights of modification reserved. Manufactured by BenQ Mobile GmbH & Co. OHG under trademark license of Siemens AG www.siemens.com/me75 Designed for life ME75 Table of Contents Safety precautions ..................... 2 Display symbols ......................... 4 Overview of phone .................... 5 Getting started ........................... 7 Switching on/off/ entering PIN ............................. 10 General instructions ................ 11 Standard functions .................. 13 Security .................................... 14 Text entry ................................. 16 Calling ...................................... 18 Default book ............................ 20 Addressbook ............................ 21 Phonebook ............................... 23 Call records .............................. 25 Camera ..................................... 26 Message list ............................. 28 SMS .......................................... 29 1 umre ere e this / MMS ......................................... 32 Email ......................................... 36 Voice message/CB ..................... 38 Surf & fun ................................. 39 Setup ........................................ 42 Fast access key ......................... 52 Organizer .................................. 53 Extras ........................................ 55 My stuff .................................... 58 Customer Care .......................... 59 Care and maintenance ............. 61 Product data ............................. 62 SAR ........................................... 64 Limited Manufacturer's Guarantee ................................. 65 Sinirli Üretici Garantisi ............. 66 License Agreement ................... 67 Index ......................................... 70 This is a summarised version of the Operating Manual. The complete version can be found in the Internet at this address: www.siemens.com/me75 2 Safety precautions Safety precautions Information for parents Please read the operating instructions and safety precautions carefully before use. Explain the content to your children and the hazards associated with using the phone. Remember to comply with legal requirements and local restrictions when using the phone. For example, in aeroplanes, petrol stations, hospitals or while driving. Mobile phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. Keep at least 20 cm/9 inches between phone and pacemaker. When using the mobile phone hold it to the ear which is further away from the pacemaker. For more information consult your doctor. Small parts such as the SIM card, sealing stop, lens ring and lens cap can be dismantled and swallowed by small children. The phone must therefore be stored out of the reach of small children. Do not place the phone near to electromagnetic data carriers such as credit cards and floppy disks. Information stored on them could be lost. Do not look at the LED (e.g. activated infrared port, flash LED) with optical magnifiers because of radiation. This product complies with IEC/EN 60825-1 "Safety of Laser Products" for LED Class 1M products; such products are safe under reasonably foreseeable operating conditions. The mains voltage specified on the power supply unit (V) must not be exceeded. Otherwise the charging device may be destroyed. The power supply must be plugged into an easily accessible AC mains power socket when charging the battery. The only way to turn off the charging device after charging the battery is to unplug it. Ringtones (page 44), info tones (page 46) and handsfree talking are reproduced through the loudspeaker. Do not hold the phone to the ear when it rings or when you have switched on the handsfree function (page 18). Otherwise you risk serious permanent damage to your hearing. Safety precautions Only use original Siemens batteries (100% mercury-free) and charging devices. Otherwise you risk serious damage to health and property. The battery could explode, for instance. You may only open the phone to replace the battery (100% mercury-free) or SIM card. You must not open the battery under any circumstances. All other changes to this device are strictly prohibited and will invalidate the guarantee. Please dispose of unwanted batteries and phones as permitted by the laws in your country. The phone may cause interference in the vicinity of TV sets, radios and PCs. Use only Siemens original accessories. This will avoid potential risks to health or property and ensure compliance with all relevant regulations. Improper use will invalidate the guarantee! These safety instructions also apply to Siemens original accessories. This mobile phone offers various functions and can therefore be used in various positions other than being held to the ear, e.g. elsewhere on the body. In this case, a minimum distance of 1.5 cm must be kept between your body and phone to enable data transfer (GPRS). 3 4 Display symbols Display symbols Display symbols (selection) Events (selection) Z W L P O Q M R S N T Signal strength Battery charge level, e.g. 50% Phonebook/Addressbook Call records Surf & fun/Service supplier portal Organizer Messages Camera Extras My stuff Setup All calls are diverted Ringing tone off Short ring (beep) only Ringtone only if the caller is stored in the Phonebook Alarm set Keypad locked Auto answer feature on Activated and available Browser connecting Infrared transmission ã ä å Æ Â Ê p q s w y z { À SIM card memory full MMS memory full Phone memory full No network access Missed call Delete assistant Unread Read Sent MMS received MMS with DRM contents (page 11) E-mail forwarded E-mail with attachment Voice mail received Message symbols (selection) Ç ¿ ¾ ¼ ¹ Ä Å £ ² ® Overview of phone 5 Overview of phone 1 Joystick Press the joystick down vertically to start an application or function (page 12). In standby mode C Open main menu. Open user profiles. Open Phonebook/Addressbook. Open Inbox. Start the camera. In lists, messages and menus C G H E D I D I E Z £ X Service provider Scroll up and down. Back one level. During a call Set volume. Call options. A Call key Dial phone number/name displayed/ highlighted, take calls. Show last phone numbers dialled in standby mode. B On/Off/End key · Switched off: Press and hold to switch on. · During a conversation or in an application: press briefly to finish. · In menus: Press briefly to go back a level. Press and hold to go back to standby mode. · In standby mode: Press and hold to switch off phone. 01.12.2005 10:10 NewMMS í Ï 2 3 6 Overview of phone 1 Integrated antenna 2 3 4 5 6 7 8 9 : * Do not obstruct the phone above the battery cover unnecessarily. This reduces the signal quality. Loudspeaker Display Infrared interface Softkeys The current functions of this key are shown in the bottom line of the display as §Text§/symbol (e.g. p). # Key lock Press and hold in standby mode: Switch key lock on/off. * Ringtone · Press and hold in standby mode: Switch all audible signals on/off (except alarm). · Press and hold on incoming call: Switch off ringtone for this call only. Connection socket For charger, headset, flash, etc. Car kit holder Connection for external antenna Camera lens Z £ X Service provider 01.12.2005 10:10 NewMMS í Ï Getting started 7 Getting started Inserting the SIM card/ battery The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges. Additional information Please switch off your phone before removing the battery! 1.8- and 3-V SIM cards are supported. Please contact your service provider if you have an older SIM card. · Place the SIM card in front of the slot with the contact surface facing downwards. Then push the SIM card in using gentle pressure 1 (ensure that the chamfered corner is in the correct position). · Insert the battery sideways into the phone 2, then press downward 3, until it engages (to remove, press the retaining tab on the side of the battery, then lift the battery out). 2 3 · Push the cover forwards until the two lugs engage in the openings 4, then push it down until it clicks into place 5. 5 4 1 8 Getting started · Insert the locking screw 6 and turn it ninety degrees to lock 7. Charging the battery The battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least three hours. As an alternative, the battery can be charged via the USB port (see Accessories: USB data cable). 6 7 · To remove the cover, undo the locking screw by turning it back ninety degrees, then use the opening lip to pull off the cover. Y Display during charging. Charging time An empty battery is fully charged after approx. 3 hours. Charging is only possible within a temperature range of +5 °C to +45 °C. If the temperature rises/falls 5 °C above/below this, the charge symbol flashes a warning. The mains voltage specified on the power supply unit must not be exceeded. Dust and splash-proof seals · Position the cover 1 correctly in the connection socket. · The camera lens and antenna socket are protected by the lens cap 2. 2 Operating time The operating time depends upon the respective conditions of use. Extreme temperatures reduce the phone's standby time. Do not leave the phone in direct sunlight or on a radiator. Talktime: 3 to 8 hours Standby time: 270 to 450 hours 1 Getting started 9 Charge icon not visible If the battery has been discharged fully, the charge icon is not immediately visible when the power supply is plugged in. It will appear after up to two hours. In this case the battery is fully charged after 3 to 4 hours. Only use the plug-in power supply included in delivery! Display while in service Charge level display during operation (empty­full): VWX A beep sounds when the battery is nearly empty. The charge level of the battery is only displayed correctly after an uninterrupted charging/discharging cycle. You should therefore not remove the battery unnecessarily and where possible not finish the charging process prematurely. Additional information The power supply unit heats up when used for long periods. This is normal and not dangerous. If the battery is removed for longer than 30 seconds, the clock must be reset. 10 Switching on/off/entering PIN Switching on/off/entering PIN Switching phone on and off Switching on your phone for the first time Time/date During commissioning, set the clock so that it displays the correct time. You will not have to make this setting again. Press this key, then select §Change§. First enter the date (day/ month/year), then the time (24 hours, including seconds). Press this key. The time and date are updated. Press and hold the On/Off/ End key. B Enter PIN The SIM card can be protected with a 4 to 8-digit PIN. Enter the PIN using the number keys. The characters **** appear to ensure nobody can read your PIN on the display. Correction with]. Confirm. Logging on to the network will take a few seconds. C J J §OK§ C Time zones Additional information Change PIN..................................page 14 Clear SIM card barring .................page 15 F I §Options§ Emergency number (SOS) Only to be used in real emergencies! By pressing the softkey §SOS§ you can make an emergency call on any network without a SIM card and without entering a PIN (not available in all countries). Set the time zone you are in. Select the city in the desired time zone. Use Set time zone to save. Copying SIM addresses The first time the SIM card is inserted, the entries on it can be copied to the Addressbook. Please do not interrupt this procedure. During this time, do not accept incoming calls. Follow the instructions in the display. You can also copy data from the SIM card at a later time (page 24). General instructions 11 General instructions Standby mode The phone is in standby mode and is ready for use when the name of the service provider appears on the display. Main menu The main menu is displayed graphically with symbols: B By pressing and holding, you can return to standby mode from any situation. Signal strength C F/I C §Options§ Call up from standby mode. Select the application symbols. Start an application. Z [ Strong receive signal. A weak signal reduces the call quality and may lead to loss of the connection. Change your location. Main menu options Open menu. Different functions are available depending on the context: Big letters Illumination Search Selection between two font sizes. Set display light brighter/ darker ...