Detailed instructions for use are in the User's Guide.
Model 5207 Fire Alarm Built-in Touchpad Operating Instructions
These instructions must be framed and displayed next to the Model 5207 panel in accordance with NFPA 72 fire code for Local Protected Fire Alarm Systems. Basic Operation of Built-in Touchpad Function System test* Reset alarms (or smoke detectors)* Clear alarm memory* Reset dialer Start download Alarm memory display Display troubles Silence troubles or alarms* Disable/Enable zones Begin fire drill
0 ENTER 1 ENTER 2 ENTER 3 ENTER + code 0 or 1 4 ENTER + code 0 or 1 5 ENTER 6 ENTER 7 ENTER + code, or SILENCE + code
Keystrokes
Function Set date* For example, to set the date of Jan. 13, 1995, enter: 011395 Set time* For example, to set the time of Wed., 4:30 p.m., enter: 310430
Keystrokes 8 ENTER + 6-digit date Use mmddyy format for date, where: mm = Month (enter leading 0 for 1-digit months) dd = Day (enter leading 0 for 1-digit days) yy = Year 9 ENTER + 6-digit date Use wdhhmm format for time, where: w = Day of week (0=Sun., 1=Mon., 2=Tue., 3=Wed., 4=Thu., 5=Fri., 6=Sat.) d = Time of day (0=AM, 1=PM) hh = Hour (enter leading 0 for 1-digit hrs.) mm = Minutes (enter leading 0 for 1-digit min.)
Zone # + DISABLE
2 0 ENTER + code 0 or 1
To exit download, set date, and set time modes, press CLEAR CLEAR . * These functions do not require you to enter a valid operating code unless the NEED CODE AT PANEL option is selected during programming. For service call:
The system sounds an alarm and reports a fire test when you exit fire drill mode. End fire drill Walk test Zone Troubleshooting mode Step Programming mode
SILENCE + code 0 or 1 2 2 ENTER + code 2 5 ENTER + code 2 7 ENTER + code 0
Form # 150486
...
