User manual SILENT KNIGHT SK-5208

SK-5208 Basic Operating Instructions P/N 151214 Rev. A These instructions must be framed and displayed next to the panel in accordance with NFPA 72 fire code for Local Fire Alarm System. How To Do This Press Display Message Press Enter Code Enter Code Enter Code Enter Code Enter Code Comments The system will perform a display lamp test and a communication test. Resets system. Resets the dialer and aborts the call to central station. Displays the panel history, which includes alarms, supervisories, troubles, reports, time and date changes, etc. View existing system status. List Alarms first, supervisories and then troubles. Test the system Reset Alarms Reset the Dialer Display History Events Show Status 0 1 3 5 6 7 or 6\VWHP 7HVW (QWHU &RGH 5HVHW $ODUP (QWHU &RGH 5HVHW 'LDOHU (QWHU &RGH +LVWRU\ (YHQWV (QWHU &RGH 6KRZ 6WDWXV (QWHU &RGH 6LOHQFH (QWHU &RGH 'LVDEOH =RQH (QWHU &RGH NAC # + Silence Troubles or Alarms Enter Code Disable/Enable a Zone Zone # + Disable/Enable NAC Enter Code Enter Code Repeat the process to enable the zone. Repeat the process to enable the NAC. 1 0 'LVDEOH 1$& (QWHU &RGH )LUH 'ULOO (QWHU &RGH 5VW 6PN 3ZU (QWHU &RGH :DON 7HVW (QWHU &RGH Cut Along the Dotted Line Conduct a Fire Drill Reset Detectors Walk Test the System 2 2 2 Press 0 1 2 or Enter Code Enter Code Enter Code Enter Installer Code To End the Fire Drill press Resets all smoke detector power. then code. To End the Walk Test press . Menu of Options to scroll trough list. To exit press or wait 15 seconds. Events can be acknowledged by pressing the button. No code is required to acknowledge events. The status LEDs (Alarm, Supervisory and Trouble) will flash when an un-acknowledged alarm, supervisory, or trouble condition exists. After each event has been acknowledged its associated LED (Alarm, Supervisory, or Trouble LED) stop flashing and turn on Acknowledge Events steady. When viewing system status the LCD displays "Acked" for each individual event once it has been acknowledged. The control panel piezo will silence after all alarms have been acknowledged. Note: The control panel piezo will continue to sound for Supervisories and Troubles even after the event has been acknowledged. Supervisories and troubles will silence once the event is restored. After the event is acknowledged an event is added to the event history buffer. Acknowledged events in the history buffer will be preceded with an asterisk "*". LEDs Meaning LED ALARM (red) Status Off On Flashing Off On Flashing Off On Flashing Off On On Off Flashing Condition Normal condition System in alarm. LED will flash when a alarm condition exists that has not been acknowledged. Normal condition If a supervisory condition exist on the system. LED will flash when a supervisory condition exists that has not been acknowledged. Normal condition Trouble condition exists LED will flash when a trouble condition exists that has not been acknowledged. Normal condition. Alarm or trouble condition has been silenced but condition still exists. Panel is running on AC (normal condition); standby battery fully charged. Panel has lost all power. Panel is running on battery power only or AC power only. SUPERVISORY (yellow) TROUBLE (yellow) SILENCED (yellow) AC (green) For Service Contact: