SilverCrest DPF-710A User manual and service information Digital Photo Frame DPF-710A Package contents Front View English Accessories A B C D Photo frame Power adapter DC Power cord Pedestal 1 English Back view Digital Photo Frame DPF-710A 1 2 3 4 5 6 7 8 9 10 11 12 13 Navigation up Navigation down Navigation right Navigation left Enter - Confirm Menu on/off Power adapter receptacle Pedestal mount Wall mounting holes Card reader On/Off button Flat-shaped plug (figure see page 1) Round-shaped plug (figure see page 1) 2 Digital Photo Frame DPF-710A English Table of Contents PACKAGE CONTENTS................................................................................1 IMPORTANT SAFETY INSTRUCTIONS ......................................................4 Operating Environment .................................................................................4 Power supply ................................................................................................5 Cables...........................................................................................................5 Maintenance and Care..................................................................................6 Children ........................................................................................................6 Intended Use ................................................................................................7 Disposal of Old Devices................................................................................7 CE Declaration of Conformity .......................................................................7 GETTING STARTED ....................................................................................8 Mounting .......................................................................................................8 Wall-Mounting ...........................................................................................8 Pedestal Mounting.....................................................................................8 Connecting....................................................................................................9 Control Panel ................................................................................................9 Inserting the Memory Card .........................................................................10 OPERATION...............................................................................................11 Powering the Device On/Off .......................................................................11 Starting the Picture Playback......................................................................12 Picture Menu ...........................................................................................13 Displaying the Clock and Calendar .............................................................14 Setting Date and Time.............................................................................15 Preferences ................................................................................................16 Notes for Picture Editing .............................................................................17 APPENDIX..................................................................................................19 Technical Specifications .............................................................................19 Important Warranty Information ..................................................................20 3 English Digital Photo Frame DPF-710A Thank you for choosing a SilverCrest product. This digital photo frame allows you to play pictures stored on a digital camera memory card as well as display the integrated calendar. The package includes a pedestal that can be used optionally and the possibility for wall-mounting provides maximum flexibility for this photo frame. Important Safety Instructions Before you use this device for the first time, please read the following notes in this manual and heed all warnings, even if you are familiar with handling electronic devices. Keep this manual in a safe place for future reference. If you sell or pass this device on to another person, it is imperative that you also hand over this manual. Operating Environment Position the device on a stable, even surface and do not place any objects on the device. The device is not for use in environments with a high temperature or humidity (e.g. bathrooms), and must be kept free of dust. Operating temperature and humidity: 5 °C to 35 °C, max. 85 % RH. Always make sure that there is free circulation of air (do not place the device on shelves, on a thick carpet, on a bed, or anywhere that obstructs the ventilation slots, and leave at least 10cm clearance on all sides); no direct heat sources (e.g. heating) can affect the device; no direct sunlight or bright artificial light reaches the device; contact with spray and dripping water and abrasive liquids is avoided and the device is never operated near water, and it must especially never be immersed (do no place any objects filled with liquids such as vases or drinks near the device); the device is never placed in the immediate vicinity of magnetic fields (e.g. loudspeakers); no fire sources (e.g. burning candles) are placed on or near the device; no foreign bodies are introduced into the device; 4 Digital Photo Frame DPF-710A English the device is not subject to any great temperature changes as this may cause moisture through condensation and short-circuit; the device is not subject to excessive shocks and vibrations; Power supply Use only the supplied power adapter model Targa KSUFB0500100W1EU to avoid overheating, deformation of housing, fire, electric shock, explosions and other dangers. Never connect this power adapter to other devices. Warning! Notice on Mains Separation: In order to completely disconnect the device from the mains, the power adapter must be pulled out from the wall outlet. For this reason, the device should be positioned in a way that assures unobstructed access to the power outlet so that the power adapter can be immediately pulled out in an emergency situation. To avoid the danger of fire if the power adapter is not going to be used for a long while (e.g. during holidays), it should always be disconnected from the power socket. Before stormy weather when there is the danger of lightning, disconnect the device from the power supply. Cables Always hold all cables by the plug and never pull on the cable itself. Never hold the power adapter with wet hands as this may cause a short circuit or electric shock. Never place the device, heavy objects or furniture on the cable and take care that the cord does not become trapped, especially at the plug and sockets. Never make knots in the cable and do not tie it together with other cords. All cables should be positioned so that nobody can trip over them or be obstructed by them. A damaged power adapter can cause a fire or an electric shock. Inspect the power adapter from time to time. Never use adapter plugs or extension cables that do not comply with the current safety regulations in your country, and do not modify any of the power adapter or cables yourself. 5 English Maintenance and Care Digital Photo Frame DPF-710A Servicing is required when this device has been damaged in any way, for example, when the power adapter or housing is damaged, when liquid or objects have entered the device, when the product has been exposed to rain or moisture, when the product does not work normally or if the product has been dropped. If you notice any smoke, unusual noise or strange smells, switch off the device immediately and pull the mains cable from the power supply. In this case the device should not be used further and should be inspected by authorized service personnel. Please contact qualified personnel when servicing is needed. Never open the housing of the device, or the power adapter. If the housing is opened, your life is in danger due to electric shock. Only use a clean, dry cloth for cleaning. Never use any abrasive liquids. Do not attempt to open the housing of the device otherwise you will void your warranty. Children Electrical appliances do not belong in the hands of children! Do not allow children to play with electrical devices when not under supervision. Children may not be able to comprehend the presence of potential risks. Small parts can represent choking hazards. Keep the packaging away from children to avoid the danger of suffocation. 6 Digital Photo Frame DPF-710A Intended Use English This is an information technology electronics device. It may only be used for private use, not industrial or commercial purposes. In its default configuration, this product has not been designed for medical, lifesaving, rescue or life-maintaining purposes. Furthermore, the device may not be used outdoors or in tropical climates. Only connection cables and external devices may be used that comply with safety standards and the electromagnetic compatibility and shielding quality of this device. This device fulfils all that relates to CE Conformity, relevant norms and standards. Any changes to the equipment other than the recommended changes by the manufacturer may lead to the result that these directives are not met any more. Only use accessories recommended by the manufacturer. If you are not using the device within the Republic of Germany, you must observe the regulations and laws in the country of use. Disposal of Old Devices If the product is labelled with a struck-out waste bin, it is subject to the European Guideline 2002/96/EC. All electric and electronic devices must be disposed of separately from household waste at established bodies. Avoid damaging the environment and danger to your personal health by disposing of the device properly. For further information about proper disposal, contact your local government, disposal bodies or the shop where you bought the device. CE Declaration of Conformity This device has been tested and approved for compliance with the basic and other relevant requirements of the EMC Directive 2004/108, as well as the Low-voltage Directive 73/23/EEC. 7 English Getting Started Mounting Wall-Mounting Digital Photo Frame DPF-710A If you wish to mount the digital photo frame onto the wall, use the wall mounting holes (9) on the back panel of the device to orientate the photo frame either horizontally or vertically. Use one screw for vertical or two screws for horizontal mounting with a head diameter of max. 5 mm in order to support the photo frame weight safely. Please bear in mind that a suitable wall outlet should be located near the wall mount location. Pedestal Mounting In order to place the digital photo frame onto a table you will need to attach the supplied pedestal (D) onto the back panel of the device. Insert the pedestal into the hole (8) and turn it 90 degrees clockwise until it clicks into place. The asymmetrical shape of the pedestal makes it impossible to mount it in inverted direction. Once the pedestal is attached you can choose whether to place it horizontally or vertically on the table. i 8 Please note that the digital photo frame does not detect whether the pictures have been recorded in portrait (vertical) or landscape (horizontal) format. It might be necessary to optimise the picture by using a suitable image-editing programme on a computer. Digital Photo Frame DPF-710A Connecting English Insert the round-shaped plug (13) of the cable into the connection port (7) of the photo frame and the flat-shaped plug (12) of the cable (C) into the power out receptacle of the power adapter (B). Plug the power adapter into a wall outlet. Control Panel 1 2 3 4 5 6 Navigation up Navigation down Navigation right Navigation left Enter - Confirm Menu on/off 9 English Inserting the Memory Card Digital Photo Frame DPF-710A The built-in card reader can read the following memory cards (alphabetical order): Without adapter card MMC MMC Plus MS MS-Pro SD SD HC xD With adapter card Micro SD Mini SD MMC micro MMC mobile RS-MMC RS-MMC DV Insert a memory card (see table) into the card reader (10) at the bottom of the device until it fits in place. The memory card can only be inserted when its contacts point towards the photo frame front panel. To remove the memory card, simply pull it out. i 10 You can insert and remove the memory card while the device is powered on. If you insert a memory card while the unit is powered on, a summary of the pictures contained on the card will be displayed immediately. Digital Photo Frame DPF-710A Operation Powering the Device On/Off English Slide the On/Off switch (11) to the "On" position to power on the device or slide it to the "Off" position to power it off. After powering the digital photo frame on, after a few seconds the following image will appear: Memory card type indicator (description sta ...