User manual SIMA SL-9X

Need additional Video Accessories? Try Sima's ST-11K mini tripod with universal clip! This pocket tripod conveniently provides the support you need for a steady camcorder or cell phone photo shoot. Clip included. 90 Day Limited Warranty Sima Products warrants this product against defects in materials and workmanship for a period of 90 days from the date of retail purchase. During the warranty period, the product will be repaired or replaced, at Sima's option. You can register your product online at www.simacorp.com 50 Lumen Xenon Video Light for Digital Camcorders Conditions Sima's Cellphone camera disposable lenses, Model SML-3, let you stick and shoot a better photo with your cell phone camera. Choose from Wide, Telephoto and Macro for the best little cell phone pics you've ever seen. Ship your unit, freight pre-paid, including reasonable proof of date and place of purchase and description of problem to: Attn: Customer Service c/o Sima Products Bldg. #5 140 Pennsylvania Ave. Oakmont, PA 15139 This warranty is void if any defects are caused by abuse, misuse, negligence or unauthorized repairs. All liability for incidental or consequential damages is specifically excluded. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal right and you may also have other rights which vary from state to state. Sima's Mini-Zoom mic, Model MZM-1, lets you zoom in on the audio your want while camcording your favorite events. Weddings, graduations and the holidays never sounded so good. Register online at www.simacorp.com and receive special offers and discounts Self-powered compact video light Model SL-9X Register online at www.simacorp.com Call 800-345-7462 for information Introduction The Sima Xenon Universal Video Light Model SL-9X can be mounted on the accessory shoe of any camcorder by sliding it into place and tightening the mounting screw. If your camcorder does not have a shoe mount, the Sima Video Bracket, (Model SVB-1) can provide a mounting platform. The SL9X also comes with a universal clip for use with camera phones. To charge the batteries: 1. Insert the jack on the power cord into the power input jack on the side of the SL-9 (Fig. A). Red LED indicator light, located below the power jack, will turn on. 2. Plug AC Fig. A transformer into standard 120 VAC wall outlet. 3. Batteries must charge 8 to 10 hours before fully charged. Note: indicator light will not turn off when charging is complete. 4. Fully charged batteries will provide approx. 20 to 25 minutes continuous run time. Note: Light does not work with AC adapter plugged in unit's power jack. Warning! Do not overcharge. Unplug after 810 hours charging. Special Notes The SL-9X video light can also be operated with two standard AAA alkaline batteries. Running time will be less than when using the rechargeable NiMH batteries included with your unit. If using non-rechargeable batteries, do not use AC charger. Supplying current to non-rechargeable batteries can cause them to leak or explode and may damage the unit. Specifications Lamp: 3W Xenon lamp Power: 2 AAA NiMH batteries Run Time: 20 to 25 min. with 600 mA hour NiMh batteries. Charger: 120V AC input; 3V DC output Weight: 2.2 oz. (with batteries). Size: 2.75" x 1.5" Batteries. The SL-9X comes with two rechargeable AAA NiMH batteries. The batteries must be charged 8 to 10 hrs. prior to use. Use the supplied AC adapter/charger to charge the batteries. Warning! Never charge alkaline batteries. Damage to AC charger or light can occur. Operation: Turn light on by sliding the on/off switch up to the ON position as shown in Fig. B Replacing the lamp: Contact Sima at 800-345-7462 for instructions on replacing the lamp. Note: Touching bulb with bare fingers will damage bulb and cause bulb failure. Installing the batteries To install the batteries ­ slide open the battery compartment located on top of the unit. Insert the two AAA size batteries according to the +/- markings on the unit. Close top. Fig. B © 2005 Sima Products Corporation P/N 21717 Made in China Printing instructions: · Manual is to be printed two-sided in black ink on white paper. · Size before folding is 4.25" x 11". · Finished size (after folding) is 2.75" x 4.25". · Manual is folded so that front cover with Sima logo and picture of SL-9 is showing. · Manual is to be inserted inside package.