User manual SIMA SZM-2

Microphone care and handling · · · · · Remember to turn off the microphone (use setting switch) to save battery power. Store in a clean, dry place. Avoid moisture, dampness or immersion in water. Avoid hitting or striking the top of the microphone. Do not blow direcly into the microphone. Remember to remove the battery if the microphone will not be used for an extended period of time. 90 Day Limited Warranty from Sima Products Corporation Sima Products Corp. ("Sima") warrants that if the accompanying product proves to be defective to the original purchaser in material or workmanship within 90 days from the original retail purchase, Sima will, at Sima's option, either repair or replace same without charge (but no cash refund will be made). What you must do to enforce Warranty You must deliver, mail or ship the product, together with both the original bill of sale and this limited Warranty statement as proof of warranty coverage to: Sima Products Corp. Attn: Customer Service 140 Pennsylvania Ave. Bldg. #5 Oakmont, PA 15139 It is recommended that you call Sima Customer Service at 800-345-7462 to obtain a return authorization number. Limitation of Liability and Remedies Sima shall have no liability for any damages due to lost profits, loss of use or anticipated benefits, or other incidental, consequential, special or punitive damages arising from the use of, or the inability to use, this product, whether arising out of contract, negligence, tort or under any warranty, even if Sima has been advised of the possibility of such damages. Sima's liability for damages in no event shall exceed the amount paid for this product. Sima neither assumes nor authorizes anyone to assume for it any other liabilities. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Model SZM-2 Zoom Microphone for use with Camcorder (camcorder not included) Troubleshooting Tips SZM-2 does not work 1. May not be turned on. Turn on by setting switch to Normal or Zoom. 2. May not be connected properly to camcorder or audio board. Check connections 3. Battery may be dead. Replace if needed. 140 Pennsylvania Ave. Bldg #5 Oakmont, PA 15139 800-345-7462 www.simacorp.com ©2004 Sima Products Corporation PN21698 Congratulations on your purchase of Sima's new Zoom Microphone, Model SZM2. This high quality electret condenser microphone is designed for super-directive telescopic use with high sensitivity and extreme low noise. It can pick up a sound source clearly and naturally at both short and long distances, even in noisy environments. It has two custom sound/distance settings to maximize the audio effect you want to achieve. The SZM-2 is designed for outdoor sports broadcasts, stage, video and/or movie productions. It can be mounted on a camcorder, a tripod, a traditional stand or handheld. Cables The SZM-2 comes with a 2.5' coiled cable and a 25' straight cable. Each has a screw-on connector for connection to the SZM-2. Mounting The mounting handle includes an adjustable shoe mount that threads into the bottom. By removing the shoe mount, the handle will screw directly onto a standard microphone stand. With the shoe mount in place, the handle can either be screw-mounted onto a standard video tripod or mounted onto your camcorder. This package contains: 1 SZM-2 microphone 1 Straight 25' cable 1 Coiled 2.5' cable 1 Camera mount / mic holder 1 User manual 1 Windscreen Mic stand threads Shoe mount with tripod threads SZM-2 polar response in "Normal" mode Settings - On the side of the SZM-2 is a switch that performs 3 functions. 1. Off (Remember to turn off before storing.) 2. Normal - a closer, wider audio range. 3. Zoom ­ a longer, narrower audio range. Operation Install battery according to the polarity markings in the battery compartment. 1. Connect the screw-on end of the cable to the bottom of SZM-2. 2. Slide mike holder on to camcorder and snap SZM-2 into holder. For best results, aim SZM-2 towards sound source. 3. Connect the other end to the camcorder or audio board as desired 4. Set switch to Normal or Zoom as desired. Turn off when finished. Battery Slot Bottom cover Battery Installation The SZM-2 requires 1 AA battery (not included). To install, unscrew the bottom cover and slide off. Insert the battery according to the markings inside. Replace cover before using. Specifications Type System Sensitivity Freq. Response Output Impedance Power Source Sound Pressure level Signal to Noise Ratio Accessories Battery life Super Cardioid Electret Condenser Switchable, uni-directional, variable range Normal: -70 dB (1V/µ bar 1KHz) Zoom: -51 dB (1V/µ bar 1KHz) 80 Hz ~ 12,000 Hz 560 ohm (normal ) 2.3K (telescopic) DC 1.5 AA battery (not included) 120 dB Maximum 40 dB or more Windscreen and mike holder 500-2000 hours (alkaline ­ not included) SZM-2 polar response in "Zoom" mode