User manual SITECOM CN-521

USB Bluetooth Adapter CN-512 Bluetooth 2.0+EDR klass 2 CN-520 Bluetooth 2.0+EDR klass 2 CN-521 Bluetooth 2.0+EDR klass 1 Full Manual Copyright © 2005 Toshiba Corporation All rights reserved Contents 1. 2. 3. 4. 5. 6. Installation of the Bluetooth Software........................................................3 Configuring Bluetooth services .................................................................7 Device properties and Security settings .....................................................8 Remote Camera ................................................................................... 10 Wireless File Transfer ............................................................................ 16 Bluetooth Information Exchanger............................................................ 20 6.1 Object Push Profile (OPP) ............................................................... 33 6.2 File Transfer Profile (FTP) ............................................................... 34 6.3 Basic Imaging Profile (BIP) ............................................................. 37 7. Bluetooth Settings ................................................................................ 39 7.1 Configure a connection to a BT Mouse and/or Keyboard ...................... 43 7.2 Configure a connection to a BluetoothTM enabled printer ..................... 49 7.3 Configure a Dial-up connection........................................................ 60 7.4 Configure a Stereo Headset connection ............................................ 66 7.5 Configure a Headset connection ...................................................... 72 7.6 Configure a FAX connection ............................................................ 78 7.7 Configure a Network connection ...................................................... 92 8. FAQ.................................................................................................... 98 9. Glossary ............................................................................................. 98 Copyright © 2005 Toshiba Corporation All rights reserved 1. Installation of the Bluetooth Software · · Place the installation CD-ROM into the PC. Setup should start automatically. If setup does not start go to Windows File Explorer, locate the CD-ROM and run `setup.exe' Choose `Install (v3.03.13(C))'. · · The InstallShield Wizard will start. On the Welcome screen click Next to continue. Copyright © 2005 Toshiba Corporation All rights reserved · Read the License Agreement and select `I accept the terms in the license agreement'. Click Next. · On the next screen click Install to continue. Copyright © 2005 Toshiba Corporation All rights reserved · Installation is in progress...wait a few seconds. · You will get a dialogue box indicating that the Installation process may take up to 15 minutes. Click Yes to proceed. · You will get a prompt to insert the USB-BT device. Do so and click OK. If your PC has an integrated BT module, this dialogue box will not appear. Copyright © 2005 Toshiba Corporation All rights reserved · To complete Installation click Finish. · In order to use the Bluetooth Software you have to reboot the PC. Click Yes to proceed. Copyright © 2005 Toshiba Corporation All rights reserved 2. Configuring Bluetooth services · Right click the ICON in the tray bar and select Service Properties... from the menu to open the `Service Properties' window · Now you are able to toggle the following BluetoothTM-services Bluetooth Information Exchange Service: ... enables a (server) function that allows files, images and business cards to be transferred from a remote device using Bluetooth Information Exchanger. I.e. Send a business card from a mobile phone to the PC PAN Networking Service: ... enables a (server) function that allows networking to be performed from a remote device using the PAN Networking Service. I.e. BluetoothTM Network connection from a PDA to the PC Bluetooth COM Port Service: ... enables a (server) function that allows COM Service to be performed from a remote location using the Serial Port Profile. I.e. ActiveSync from a PC<->PDA via SPP AV Remote Control Service: ... enables a (server) function that allows remote control to be performed from a BluetoothTM device supporting the AV Remote Control Service. I.e. Control Microsoft Media Player from a stereo headset Copyright © 2005 Toshiba Corporation All rights reserved 3. Device Properties and Security settings · · Open the `Device Properties and Security' window ICON in the tray bar and select Device Properties and Right click the Security... from the menu. · You will get a general overview of your BluetoothTM Hardware properties You can get useful information, such as Device Name, Device Address or the Manufacturer Name of your Bluetooth chipset. The LMP Version indicates which BluetoothTM version your Hardware supports. BluetoothTM v1.1 -> LMP Version 01 BluetoothTM v1.2 -> LMP Version 02 BluetoothTM v2.0 + EDR -> LMP Version 03 Copyright © 2005 Toshiba Corporation All rights reserved · The Security Tab allows you to configure your BluetoothTM device security Discoverability mode: Set whether your device is visible to other BluetoothTM devices or not. Other devices will be still able to establish a connection to your device as long as your Connectability mode is set to `Connectable mode' Connectability mode: Set whether you allow remote BluetoothTM devices to connect to the local device or not. Even if the local device is not discoverable, incoming connections are still accepted. Pairing mode: Set whether you allow pairing or not. If `Pairable mode' is set and encryption is required by one of the BluetoothTM devices a passkey will be requested on both devices once upon first connection. Security mode: You can set whether the connection to the remote device will be encrypted or not. This security feature enforces an encrypted connection. The connection can also be encrypted even if Security mode is set to `Nonsecure' if the remote device requests encryption i.e. mobile phones Copyright © 2005 Toshiba Corporation All rights reserved 4. Remote Camera · · Launch the `Remote Camera' application Right click the ICON in the tray bar and select Remote Camera. · Activate Bluetooth on the Remote Camera and click the `Camera Search...' button. Device Discovery will be performed...this may take a few seconds. Copyright © 2005 Toshiba Corporation All rights reserved · · All available BluetoothTM cameras will be listed. Right click the camera and select `Connect' or just double click the camera ICON · A green/yellow connected chain will be displayed if the BluetoothTM connection is established. A second window appears which shows an almost live preview of the camera picture. It is possible to change the size of the preview window. The resolution of the preview window is much smaller than the real resolution of the picture that will be taken by the camera. Copyright © 2005 Toshiba Corporation All rights reserved Basically you will take one picture by clicking on the right trigger button. [Camera ICON] It is also possible to take consecutive pictures by clicking the left trigger button. [Camera ICON] The pictures will be automatically transferred to the PC. · A progress bar indicates the status of the image transfer Copyright © 2005 Toshiba Corporation All rights reserved · You will see a small preview of the transferred pictures in Remote Camera" application. Just double click a picture to open it in your default picture viewer. · You can easily disconnect the Camera by right clicking on the camera ICON and selecting Disconnect from the context menu. A dialogue box appears and asks whether the BluetoothTM connection to the remote camera should be registered or not. The connection to the remote camera will be stored if Yes is selected. Every time you open the Remote Camera application the BT connection will be established. If you click No, you have to search for a BuetoothTM camera again, every time you launch the the Remote Camera application. Copyright © 2005 Toshiba Corporation All rights reserved · It is possible to change some default settings in the Remote Camera application. Choose [Bluetooth]->[Properties]->[...] from the menu. · Device detection filter The Remote Camera application may discover devices other than digital cameras, depending on which profiles are supported. Adjusting the setting to "Loose filtering" will increase the chance that devices other than cameras will be detected. The further you slide the setting towards "Tight filtering," the stricter the criteria determining device detection, and the lower the chance that unwanted devices will be included. · Change number of consecutive images Allows you to set the number of consecutive images captured by your digital camera. Copyright © 2005 Toshiba Corporation All rights reserved · Settings for size of captured image Images will be sent to your PC after having been automatically converted to the size specified in the dialog box above, regardless of the size of the original image data. · Inbox settings Opens Browse folders..." dialog box and allows you to select the folder where you would like your captured images to be saved. Copyright © 2005 Toshiba Corporation All rights reserved 5. Wireless File Transfer · · Launch the `Wireless File Transfer' application Right click the ICON in the tray bar and select Wireless File Transfer. There is a second way to launch the Wireless File Transfer application. A right click a file allows you to select `to Bluetooth' -> `Search other devices' A third way would be to launch the Wireless File Transfer application from the Start menu: [START]->[All Programs]->[Bluetooth]->[Wireless File Transfer] Copyright © 2005 Toshiba Corporation All rights reserved · The Wireless File Transfer application starts and Device Discovery is performed. Note: If the desired device does not appear in the list, please check that the device is switched on. Copyright © 2005 Toshiba Corporation All rights reserved · After device discovery, select the BluetoothTM devices to which you want to send the file. You can also add more than one File or Folder to the list. Finally click `Send' and the Files/Folders will be transferred to the selected BluetoothTM devices. Note: When sending files, a message requesting permission to receive the files may appear on the destination (receiving) device. The content of the message will vary with the BluetoothTM software installed. Please be sure to follow the instructions provided. Copyright © 2005 Toshiba Corporation All rights reserved · A progress bar indicates transfer status · After the File/Folder is transferred a dialogue box appears and confirms successful transfer. Copyright © 2005 Toshiba Corporation All rights reserved 6. Bluetooth Information Exchanger · · Launch the `Bluetooth Information Exchanger' application Double click the ICON on the Desktop or open Explorer. This feature is fully integrated into Explorer · FTP: File Transfer This is mainly used to handle files and folders in the same way as it exist locally. BIP: Image Transfer This is mainly used to transfer Images from one device to another. Both devices can negotiate the picture resolutions they can handle. OPP: Object Push This is mainly used to exchange business cards (*.vcf). · · Copyright © 2005 Toshiba Corporation All rights reserved