11/22Mbps Wireless CardBus / PCI Adapters User Guide SMC2435W & SMC2402W V2.0 · 1 Wireless Cardbus Adapter (SMC2435W) or 1 Wireless PCI Card (SMC2402W) · 1 Driver, Utility, & Documentation CD · Manual Immediately inform your dealer in the event of any incorrect, missing or damaged parts. If possible, please retain the carton and original packing materials in case there is a need to return the product. The EZ Connect TURBO Wireless Adapters are covered by a limited lifetime warranty. SMC2435W: Installation Instructions Warning: · Network cards are sensitive to static electricity. To protect the card, avoid touching its electrical components and always touch the metal chassis of your computer before handling the card 1) Turn on your computer and insert the Driver, Utility, and Documentation CD. Run the utility software and then reboot when requested. 2) Find an available Cardbus slot in your computer. 3) With the SMC2435W Wireless Cardbus Adapters 68-pin connector facing the Cardbus slot, and the "EZ Connect TURBO"label facing up, slide the card completely into the Cardbus slot as shown below: The EZ Connect TURBO Cards are IEEE 802.11b - compliant 11/22 Mbps auto-sensing wireless network adapters. They meet the needs of small business and corporate users who require backwards compatibility with a 11 Mbps wireless connection to an existing LAN. In addition, they provide exceptional scalability to 22 Mbps through the use of Packet Binary Convolutional Code (PBCC) technology. These new adapters feature an operating range of up to 1,155 feet and true plug-and play installation in all notebook computers. English English System Requirements · SMC2435W: Available Cardbus PCMCIA Type II slot · SMC2402W: Available PCI Bus-Master slot · Windows 98/Me/2000/XP · Minimum of 1 MB available hard disk space for utility and driver installation · Another IEEE 802.11b compliant device installed in your network, such as the SMC2404WBR Barricade Turbo Wireless Cable/DSL Broadband Router, or another PC with a wireless adapter, such as the SMC2662W EZ Connect Wireless USB Adapter. Equipment Checklist After unpacking the EZ Connect TURBO 11/22 Mbps Auto-Sensing Wireless Adapter, check the contents of the box to be sure you have received the following components: 1 4) For Windows 98/Me/2000, Cardbus specification is required. Please check the documents for your Cardbus adapter driver before installing the software driver for the EZ Connect TURBO Wireless 2 Cardbus Adapter. Driver Installation Option #1 (Recommended) 5) The card will be automatically installed upon insertion. Once complete, you may take advantage of the wireless functionality this adapter has to offer. SMC2402W: Installation Instructions 1) Turn on your computer and insert the Driver, Utility, and Documentation CD. Run the utility software and then reboot when requested. 2) Switch off the computer, unplug the power cord, and remove the computer's cover. Select an unused PCI bus-master slot and remove its protective bracket. 3) Carefully insert the card and press until all edge connectors are firmly seated inside the slot. Then, screw the card's bracket securely into the PC's chassis and put the computer's cover back in place. Windows 98/Me/2000/XP NOTE: Installation processes such as these usually require the use of your original, licensed copy of Windows. Please have your Windows CD on hand BEFORE proceeding with the installation. This Installation method makes the process as simple and Plug-andPlay as possible. Simply run the driver/utility program, reboot your machine and insert your EZ Connect TURBO Wireless Card. It's as easy as 1-2-3. Step 1: Insert the Driver, Utility and Documentation CD. Step 2: Click [Start], click [Run] and type [?:\Utility\setup.exe] (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Step 3: The installation wizard will begin. English English Step 4: Click [Next >] to continue. 4) Boot up the machine. 5) The card will be automatically installed during the Operating System's boot-up process. Once complete, you may take advantage of the wireless functionality this adapter has to offer. 3 4 Step 5: You will be given the option to choose the location where the Configuration Utility will be installed. It is recommended to leave this at the default value. Click [Next >] to continue. Windows 2000: Click [Yes] if asked to continue the installation with-out a Digital Signature. Windows XP: Select [Install the software automatically] if asked and click [Next] to complete the installation. Click [Continue Anyway] if a Logo testing window appears. Continue to the Utility Configuration section for documentation on how to use the utility application for your adapter. Driver Installation Option #2 Click on the icon for your OS to view the directions: English Step 6: Please set the selection to [Yes] and click [Finish] to reboot the machine. Then shut down the computer, insert your EZ Connect TURBO Cardbus Adapter or PCI Wireless Card, and boot up your machine again. English Note: Windows 98, Me, 2000 and XP are registered trademarks of Microsoft. Step 7: Once the OS is booted up, it will find the new hardware and automatically install it. The following are OS specific options that may appear during this installation procedure: Windows 98: If you are using Windows 98, you must have your original Windows CD on hand. The system will request it near the end of the installation process. Windows Me: The installation process is fully Plug-and-Play. You will be asked to reboot when the process is complete. 5 6 Windows 98 - Driver Installation NOTE: Installation processes such as these usually require the use of your original, licensed copy of Windows. Please have your Windows CD on hand BEFORE proceeding with the installation. Step 1: After you have inserted the EZ Connect TURBO 11/22 Mbps Auto-Sensing Wireless Card in your machine, the OS will automatically recognize the adapter and prompt you for the appropriate drivers. Click the [Next >] button to begin the installation. Step 3: Clear all checkboxes except for [Specify a location:]. Then press the [Browse] button and look for the drivers on your CD-ROM. Browse to ?:\Driver. (Note: The "?" equals the letter of your CD-ROM drive. In most cases, this is D.) English Step 4: The system should find the drivers. Now click the [Next >] but-ton to continue the installation. The wizard will show "SMC2402W 22Mbps Wireless PCI Adapter" if you purchased the PCI Card or "SMC2435W 22Mbps Wireless Cardbus Adapter" if you purchased the Cardbus Adapter. Step 2: Insert the Driver CD and select the [Search for the best driver for your device] option and click [Next >]. (Note: If the system could not find the drivers, click the [< Back] but-ton, and select the [Display a list of all the drivers...] option. Select [Network Adapters] from the list of devices, press [Have Disk] and once again browse to the location of the drivers) English 7 8 Windows Me - Driver Installation Step 5: Once the system has copied the SMC drivers from the CD, it may then request files from your original Windows disk. Please insert the Windows CD at this time. NOTE: Installation processes such as these usually require the use of your original, licensed copy of Windows. Please have your Windows CD on hand BEFORE proceeding with the installation. Step 1: After you have inserted the EZ Connect TURBO Wireless Card in your machine and turned it back on, the OS will automatically recognize the adapter and prompt you for the appropriate drivers. Select the [Specify the location of the driver] option. Then click the [Next >] button to begin the installation. Step 6: The system will copy the files. Do NOT press [Cancel]. English Step 7: Once all the necessary files are copied from the Windows disk, the driver install process will be complete. Click [Finish] to exit the wizard. English Step 2: Insert the Driver CD and select the [Specify a location:] option. Clear the [Removable Media] checkbox. Then press the [Browse] button and look for the drivers on your CD. This should be located in ?:\Driver. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Then click [Next >]. Step 8: You will then be prompted to reboot the machine. Please press [Yes]. Upon reboot, the EZ Connect TURBO Wireless Card will be initialized and ready for use. 9 10 Windows 2000 - Driver Installation Step 3: The system should find the drivers. Now click the [Next >] button to continue the installation. The wizard will show "SMC2402W 22Mbps Wireless PCI Adapter" if you purchased the PCI Card or "SMC2435W 22Mbps Wireless Cardbus Adapter" if you purchased the Cardbus Adapter. (Note: If the system could not find the drivers, click the [< Back] but-ton, and select the [Display a list of all the drivers] option. Select [Network Adapters] from the list of devices, press [Have Disk] and once again browse to the location of the drivers) Step 1: After you have inserted the EZ Connect TURBO Wireless Card in your machine and turned it back on, the OS will automatically rec-ognize the adapter and prompt you for the appropriate drivers. Click the [Next >] button to begin the installation. English Step 2: Insert the Driver CD and select the [Search for a suitable driver...] option. Then click [Next >]. Step 4: Once all the necessary files have been copied, the driver installation is complete. Click [Finish] to exit the wizard. English Step 5: You will then be prompted to reboot the machine. Please press [Yes]. Upon reboot, the EZ Connect TURBO Wireless Card will be initialized and ready for use. Step 3: Clear all checkboxes except for [Specify a location]. Then click [Next >]. 11 12 Step 4: You will then be prompted to enter the location of the driv-ers. This should be ?:\Driver. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Then click [OK]. You can also click Browse] and browse to the location of the drivers on the CD for fur-ther verification. Step 6: Click [Yes] to continue the installation. Please do NOT click [No] as this will cancel the driver wizard and the card will not be installed properly. The wizard will show "SMC2402W 22Mbps Wireless PCI Adapter" if you purchased the PCI card or "SMC2435W 22Mbps Wireless Cardbus Adapter" if you purchased the Cardbus Adapter. Step 5: The system should find the drivers. Now click the [Next >] button to continue the installation. (Note: If the system could not find the drivers, click the [< Back] button, and select the [Display a list of the known drivers...] option. Select [Network Adapters] from the list of devices, press [Have Disk] and once again browse to the location of the drivers) English English Step 7: You have now completed the driver installation. Click [Finish] to initialize the adapter. 13 14 Windows XP - Driver Installation Step 1: After you have inserted the EZ Connect TURBO Wireless Card in your machine and turned it back on, the OS will automatically rec-ognize the adapter and prompt you for the appropriate drivers. Click the [Next >] button to begin the installation. Cardbus Adapter" if you pur-chased the Cardbus Adapter. Step 4: This process will be completed once the drivers are copied to the hard drive and installed. Please click [Finish] to exit the wizard. English Step 2: Insert the Driver CD and check the [Include this location in the search] option. Make sure the [Search removable media] option is not checked. Click [Browse] and find the location of the drivers. This should be ?:\Driver. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Then click [Next >]. English Step 3: Click [Continue Anyway] to continue the installation. Please do NOT click [STOP Installation] as this will cancel the driver wizard and the card will not be installed properly. The wizard will show "SMC2402W 22Mbps Wireless PCI Adapter" if you purchased the PCI card or "SMC2435W 22Mbps Wireless 15 After clicking [Finish], you will see the following message in your system tray: 16 How Do I Know the Card is Installed? This section will help you verify that the adapter is installed properly. Click on the icon for your OS to view the directions: Step 3: The Device Status shows that the "This device is working properly". If there are any error messages displayed here, you will need to click the SMC adapter and click [Remove]. Then reboot the machine and go through the installation process again. Windows Me - Verification Note: Windows 98, Me, 2000 and XP are registered trademarks of Microsoft. Windows 98 - Verification Step 1: Right-click the My Computer icon on your desktop and click [Properties]. Step 1: Right-click the My Computer icon on your desktop and click [Properties]. English English Step 2: Then go to the [Device Manager] tab and open the [Network adapters] section. You should see your EZ Connect TURBO Wireless Adapt ...