User manual SONY CDX-S2210

2-348-467-11 (1) FM/AM Compact Disc Player Operating Instructions Mode d'emploi US FR Owner's Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CDX-S2210 Serial No. For installation and connections, see the supplied installation/connections manual. En ce qui concerne l'installation et les connexions, consulter le manuel d'installation/raccordement fourni. CDX-S2210 © 2005 Sony Corporation Welcome ! Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. · CD playback: You can play CD-DA (also containing CD TEXT*), CD-R/CD-RW (MP3 files also containing Multi Session (page 9)) and ATRAC CD (ATRAC3 and ATRAC3plus format (page 10)). Type of discs Label on the disc Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. CD-DA MP3 ATRAC CD · Radio reception: ­ You can store up to 6 stations per band (FM1, FM2, FM3, AM1 and AM2). ­ BTM (Best Tuning Memory) function: the unit selects strong signal stations and stores them. * A CD TEXT disc is a CD-DA that includes information such as disc, artist and track name. CAUTION The use of optical instruments with this product will increase eye hazard. Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. SonicStage and its logo are trademarks of Sony Corporation. ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of Sony Corporation. 2 Table of Contents Getting Started Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4 DEMO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Detaching the front panel . . . . . . . . . . . . . . . . . 4 Attaching the front panel . . . . . . . . . . . . . . . 4 Other functions Changing the sound settings . . . . . . . . . . . . . . . Adjusting the sound characteristics -- BAL/FAD/SUB . . . . . . . . . . . . . . . . . . . Adjusting the equalizer curve -- EQ3 . . . . Adjusting setup items -- SET . . . . . . . . . . . . . Using optional remote commander. . . . . . . . . . Card remote commander RM-X114 . . . . . . 7 7 7 7 8 8 Location of controls and basic operations Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Additional Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Notes on discs . . . . . . . . . . . . . . . . . . . . . . . 9 About MP3 files . . . . . . . . . . . . . . . . . . . . . 9 About ATRAC CD . . . . . . . . . . . . . . . . . . 10 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Removing the unit. . . . . . . . . . . . . . . . . . . . . . 11 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 11 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 12 Error displays/Messages . . . . . . . . . . . . . . 13 CD Display items . . . . . . . . . . . . . . . . . . . . . . . . 6 Repeat and shuffle play . . . . . . . . . . . . . . . . 6 Radio Storing and receiving stations . . . . . . . . . . . . . . 6 Storing automatically -- BTM . . . . . . . . . . 6 Storing manually . . . . . . . . . . . . . . . . . . . . . 6 Receiving the stored stations . . . . . . . . . . . . 6 Tuning automatically . . . . . . . . . . . . . . . . . . 6 3 Getting Started Detaching the front panel You can detach the front panel of this unit to prevent theft. Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. RESET button Note Pressing the RESET button will erase the clock setting and some stored contents. 1 2 Press (OFF). The unit is turned off. Press , then pull it off towards you. Setting the clock The clock uses a 12-hour digital indication. (OFF) 1 2 3 4 5 6 Press and hold (SEL). The setup display appears. Press (SEL) repeatedly until "CLOCKADJ" appears. Press (DSPL). The hour indication flashes. Press the volume +/­ button to set the hour and minute. To move the digital indication, press (DSPL). Press (SEL). The clock starts and the next setup display appears. Press and hold (SEL). The setup is complete. Notes · Do not drop or put excessive pressure on the front panel and display window. · Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Tip When carrying the front panel, use the supplied front panel case. Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. To display the clock, press (DSPL). Press (DSPL) again to return to the previous display. With the card remote commander In step 4, to set the hour and minute, press M or m. DEMO mode When the unit is turned off, the clock is displayed first, then demonstration (DEMO) mode starts the demonstration display. To cancel the DEMO mode, set "DEMO-OFF" in setup (page 7) while the unit is turned off. Note Do not put anything on the inner surface of the front panel. A B 4 Location of controls and basic operations Main unit 1 2 34 SEL 5 6 789 0 SOURCE MODE ­ GROUP + 1 2 ATT EQ3 SEEK DIM REP SHUF DSPL SENS 3 4 5 6 BTM OFF CDX-S2210 qa qs qd qf qg qh qj qk Refer to the pages listed for details. a Volume +/­ button To adjust volume. b SEL (select) button 4, 7 To select items. c SOURCE button To power on/change the source (Radio/CD). d MODE button 6 To select the radio band (FM/AM). e Disc slot Insert the disc (label side up), playback starts. f Display window g ATT (attenuate) button To attenuate the sound. To cancel, press again. h EQ3 (equalizer) button 7 To select an equalizer type (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM or OFF). i Z (eject) button To eject the disc. j SEEK +/­ button Radio: To tune in stations automatically (press); find a station manually (press and hold). CD: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); fast-forward/ reverse a track (press and hold). k (front panel release) button 4 l DSPL (display)/DIM (dimmer) button 4, 6 To change display items (press); change the display brightness (press and hold). m SENS button To improve weak reception: LOCAL/ MONO. n RESET button (located behind the front panel) 4 o Number buttons Radio: To receive stored stations (press); store stations (press and hold). CD: (1)/(2): GROUP* ­/+ To skip groups (press); skip groups continuously (press and hold). (3): REP 6 (4): SHUF 6 p BTM button 6 To start the BTM function (press and hold). q OFF button To power off/stop the source. r Receptor for the card remote commander 8 * When an MP3/ATRAC CD is played. 5 CD Display items A B Radio Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. A Source B Track number/Elapsed playing time, Disc/artist name, Group number*1, Group name, Track name, Text information*2, Clock *1 Group number is displayed only when the group is changed. *2 When playing an MP3, ID3 tag is displayed and when playing ATRAC CD, text information written by SonicStage, etc. is displayed. Storing automatically -- BTM 1 Press (SOURCE) repeatedly until "TUNER" appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. Press and hold (BTM) until "BTM" flashes. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored. 2 To change display items B, press (DSPL). Tip Displayed item will differ, depending on the disc type and recorded format. For details on MP3, see page 9; ATRAC CD, see page 10. Storing manually 1 While receiving the station that you want to store, press and hold a number button ((1) to (6)) until "MEM" appears. The number button indication appears in the display. Repeat and shuffle play 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. To play Select REP-TRACK track repeatedly. REP-GP* SHUF-GP* SHUF-DISC group repeatedly. group in random order. disc in random order. Note If you try to store another station on the same number button, the previous stored station will be replaced. Receiving the stored stations 1 Select the band, then press a number button ((1) to (6)). * When an MP3/ATRAC CD is played. To return to normal play mode, select "REPOFF" or "SHUF-OFF." With the card remote commander To select preset stations, press M or m. Tuning automatically 1 Select the band, then press (SEEK) +/­ to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. 6 Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) +/­ to locate the approximate frequency, then press (SEEK) +/­ repeatedly to fine adjust to the desired frequency (manual tuning). Other functions Changing the sound settings Adjusting the sound characteristics -- BAL/FAD/SUB You can adjust the balance, fader and subwoofer volume. With the card remote commander In step 3, to adjust the selected item, press <, M, , or m. Adjusting setup items -- SET 1 2 3 4 Press and hold (SEL). The setup display appears. Press (SEL) repeatedly until the desired item appears. Press the volume +/­ button to select the setting (example "ON" or "OFF"). Press and hold (SEL). The setup is complete and the display returns to normal play/reception mode. 1 Press (SEL) repeatedly until "BAL," "FAD" or "SUB" appears. The item changes as follows: LOW*1 t MID*1 t HI*1 t BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*2 *1 When EQ3 is activated (page 7). *2 When the audio output is set to "SUB" (page 7). "ATT" is displayed at the lowest setting, and can be adjusted up to 20 steps. Note Displayed items will differ, depending on the source and setting. With the card remote commander In step 3, to select the setting, press < or ,. 2 Press the volume +/­ button repeatedly to adjust the selected item. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. The following items can be set (follow the page reference for details): "z" indicates the default settings. CLOCK-ADJ (Clock Adjust) BEEP (page 4) To set "BEEP-ON" (z) or "BEEP-OFF." Note Adjust within 3 seconds of selecting the item. With the card remote commander In step 2, to adjust the selected item, press <, M, , or m. Adjusting the equalizer curve -- EQ3 You can adjust and store the equalizer settings for different tone ranges. SUB/REAR*1 To switch the audio output. ­ "SUB" (z): to output to a subwoofer. ­ "REAR": to output to a power amplifier. DIM (Dimmer) To change the brightness of the display. ­ "DIM-ON": to dim the display. ­ "DIM-OFF" (z): to deactivate the dimmer. DEMO*1 To set "DEMO-ON" (z) or (Demonstration) "DEMO-OFF" (page 4). A.SCRL (Auto Scroll) To scroll long displayed items automatically when the group/ track is changed. ­ "A.SCRL-ON": to scroll. ­ "A.SCRL-OFF" (z): to not scroll. To select the cut-off frequency "78HZ," "125HZ" or "OFF" (z). 1 2 3 Select a source, then press (EQ3) repeatedly to select the EQ3 type. Press (SEL) repeatedly until "LOW," "MID" or "HI" appears. Press the volume +/­ button repeatedly to adjust the selected item. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. Repeat steps 2 and 3 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold (SEL) before the setting is complete. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. LPF*2 (Low Pass Filter) *1 When the unit is turned off. *2 When the audio output is set to "SUB." 7 Using optional remote commander Card remote commander RM-X114 Location of controls The corresponding buttons on the card remote commander control the same functions as those on this unit. DSPL MENU* SOURCE