Detailed instructions for use are in the User's Guide.
3-273-475-42(1)
K
LCD Digital Colour TV
Operating Instructions
GB
Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference.
RU
" " . .
KDL-40P30xx KDL-37P30xx KDL-32P30xx KDL-26P30xx KDL-26S30xx KDL-26S28xx
Printed in EU
KDL-40U30xx KDL-37U30xx KDL-32U30xx KDL-26U30xx KDL-26T28xx KDL-26T26xx
KDL-40P30xx KDL-37P30xx KDL-32P30xx KDL-26P30xx KDL-26S30xx KDL-26S28xx
KDL-40U30xx KDL-37U30xx KDL-32U30xx KDL-26U30xx KDL-26T28xx KDL-26T26xx
3-273-475-42(1)
For useful information about Sony products
K
© 2008 Sony Corporation
Introduction
Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.
Disposal of the TV set
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents
Trademark information
· is a registered trademark of the DVB Project · Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. · Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. · HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
DIGITAL
~
Notice for Digital TV function
· Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive a DVB-T signal where you live. · Although this TV set follows DVB-T specifications, compatibility with future DVB-T digital terrestrial broadcasts cannot be guaranteed. · Some Digital TV functions may not be available in some countries.
· The illustrations used in this manual are of the KDL-26S28xx unless otherwise state. · The "xx" that appears on the model name, corresponds to two numeric digits related to colour variation.
2 GB
Table of Contents
Start-up Guide Start-up Guide 4
Safety information .....................................................................................................................8 Precautions ...............................................................................................................................9 Overview of the remote ........................................................................................................10 Overview of the TV buttons and indicators ........................................................................11
4
Watching TV
Watching TV............................................................................................................................12 Checking the Digital Electronic Programme Guide (EPG) .............................................14 Using the Digital Favourite list .......................................................................................16
Using Optional Equipment
Connecting optional equipment...............................................................................................17 Viewing pictures from connected equipment ..........................................................................18 Using HDMI control .................................................................................................................19
GB
Using MENU Functions
Navigating through menus ......................................................................................................20 Picture Adjustment menu ........................................................................................................21 Sound Adjustment menu.........................................................................................................23 Features menu ........................................................................................................................25 Set-up menu............................................................................................................................27 Digital Set-up menu .......................................................................................................30
Additional Information
Specifications ..........................................................................................................................32 Troubleshooting ......................................................................................................................34
: for digital channels only
3 GB
Start-up Guide
1: Checking the accessories
Remote RM-ED009 (1) Size AA batteries (R6 type) (2) Stand (1) Screws for stand (3) Screws for stand (4) (KDL-40P30xx, KDL-37P30xx, KDL-40U30xx, KDL-37U30xx)
Stand
2: Attaching the stand
1
Open the carton box and take out the stand.
To insert batteries into the remote
Push and lift the cover to open.
~
· Observe the correct polarity when inserting batteries. · Do not use different types of batteries together or mix old and new batteries. · Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority. · Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. · Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.
2
Release the protection bag and take out the TV set.
4 GB
3
Place the TV set on the stand. Take care not to interfere with cables.
3: Connecting an aerial/ VCR/ DVD recorder
Connecting an aerial only
Coaxial cable
Start-up Guide
4
Take out the screws from the accessory bag.
KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx
Connecting an aerial/ VCR/ DVD recorder
KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx
Coaxial cable
5
Fix the TV to the stand using the supplied screws.
KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx
Scart lead
Coaxial cable
KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx
VCR
~
If using an electric screwdriver, set the tightening torque at approximately 2 N·m (20 kgf·cm)
Continued
5 GB
4: Preventing the TV from toppling over
6: Selecting the language, country/region and location
3,4,5 1 2 3
Install a wood screw (4 mm in diameter, not supplied) in the TV stand. Install a machine screw (M5 x 12, not supplied) into the screw hole of the TV. Tie the wood screw and the machine screw with a strong cord.
1 2 3
Connect the TV to your mains socket (220-240V AC, 50Hz). Press 1 on the TV (top side).
When you switch on the TV for the first time, the Language menu appears on the screen.
5: Bundling the cables
Press F/f to select the language displayed on the menu screens, then press
.
Auto Start Up Language Country Location
Select:
Confirm:
6 GB
4
Press F/f to select the country/region in which you will operate the TV, then press .
Auto Start Up Language Country Location
If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial connections and press to start auto-tuning again.
Start-up Guide
3
When the Programme Sorting menu appears on the screen, follow the steps of "Programme Sorting" (page 27).
If you do not change the order in which the analogue channels are stored on the TV, go to step 4.
Back:
Select:
Confirm:
4
~
Press MENU to exit.
The TV has now tuned in all the available channels.
If the country/region in which you want to use the TV does not appear in the list, select "-" instead of a country/region.
5
Press F/f to select the location type in which you will operate the TV, then press .
When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts in step 4 (page 7), the time must be set after performing step 4.
Auto Start Up Language Country Location
Home Shop
Detaching the TableTop Stand from the TV
~
Do not remove the Table-Top Stand for any reason other than to wall-mount the TV.
KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx
Back:
Select:
Confirm:
This option selects the initial picture mode appropiate for the typical lighting condition in these enviroments.
7: Auto-tuning the TV
1
Before you start auto-tuning the TV, insert a pre-recorded tape into the VCR connected to the TV (page 4) and start play back.
The video channel will be located and stored on the TV during auto-tuning. If no VCR is connected to the TV, skip this step.
2
Press
.
Do you want to start automatic tuning?
Back:
Start:
Cancel:
MENU
The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding.
7 GB
Installed with stand
Safety information
Installation/Set-up
Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation
· The TV set should be installed near an easily accessible mains socket. · Place the TV set on a stable, level surface. · Only qualified service personnel should carry out wall installations. · For safety reasons, it is strongly recommended that you use Sony accessories, including:  KDL-40P30xx/ KDL-37P30xx/ KDL-32P30xx/ KDL-40U30xx/ KDL-37U30xx/ KDL-32U30xx: Wall-mount bracket SU-WL500.  KDL-26P30xx/ KDL-26U30xx/ KDL-26S30xx/ KDL-26S28xx/ KDL-26T28xx/ KDL-26T26xx: Wall-mount bracket SU-WL100.
30 cm 10 cm 10 cm 6 cm
Leave at least this space around the set.
· To ensure proper ventilation and prevent the collection of dirt or dust:  Do not lay the TV set flat, install upside down, backwards, or sideways.  Do not place the TV set on a shelf, rug, bed or in a closet.  Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc.  Do not install the TV set as shown below.
Air circulation is blocked.
Air circulation is blocked.
Transporting
· Before transporting the TV set, disconnect all cables. · Two or three people are needed to transport a large TV set. · When transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel and the frame around the screen. · When lifting or moving the TV set, hold it firmly from the bottom. · When transporting the TV set, do not subject it to jolts or excessive vibration. · When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.
Wall
Wall
Mains lead
Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries:
    Use only Sony mains leads, not those of other brands. Insert the plug fully into the mains socket. Operate the TV set on a 220-240 V AC supply only. When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables.  Disconnect the mains lead from the mains socket before working on or moving the TV set.  Keep the mains lead away from heat sources.  Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.
Ventilation
· Never cover the ventilation holes or insert anything in the cabinet. · Leave space around the TV set as shown below. · It is strongly recommended that you use a Sony wallmount bracket in order to provide adequate air-circulation.
Installed on the wall
30 cm 10 cm 10 cm
Notes
· Do not use the supplied mains lead on ...