3-217-695-11(1) U LCD Digital Colour TV Operating Instructions Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. KDL-40S28xx KDL-40T26xx KDL-32S28xx KDL-32T26xx For useful information about Sony products © 2007 Sony Corporation NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with a 10 AMP FUSE (KDL-32S28xx, KDL-32T26xx), 13 AMP FUSE (KDL-40S28xx, KDL-40T26xx) otherwise the circuit should be protected by a 10 AMP FUSE (KDL32S28xx, KDL-32T26xx), 13 AMP FUSE (KDL-40S28xx, KDL-40T26xx) at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Notice for Digital TV function · Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive a DVB-T signal where you live. · Although this TV set follows DVB-T specifications, compatibility with future DVB-T digital terrestrial broadcasts cannot be guaranteed. · Some Digital TV functions may not be available in some countries. Trademark information · is a registered trademark of the DVB Project · Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. · Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. · HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. FUSE How to replace the fuse Open the fuse compartment with a blade screwdriver, and replace the fuse. Disposal of the TV set Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. DIGITAL ~ · The illustrations used in this manual are of the KDL-32S28xx unless otherwise state. The "xx" that appears on the model name, corresponds to two numeric digits related to colour variation. 2 GB Table of Contents Start-up Guide Start-up Guide 4 Safety information .....................................................................................................................7 Precautions ...............................................................................................................................8 Overview of the remote ..........................................................................................................9 Overview of the TV buttons and indicators ........................................................................10 4 Watching TV Watching TV............................................................................................................................11 Checking the Digital Electronic Programme Guide (EPG) ............................................13 Using the Digital Favourite list ......................................................................................15 Using Optional Equipment Connecting optional equipment...............................................................................................16 Viewing pictures from connected equipment ..........................................................................17 Using HDMI control .................................................................................................................18 GB Using MENU Functions Navigating through menus ......................................................................................................19 Picture Adjustment menu ........................................................................................................20 Sound Adjustment menu.........................................................................................................22 Features menu ........................................................................................................................24 Set-up menu............................................................................................................................26 Digital Set-up menu .....................................................................................................29 Additional Information Specifications ..........................................................................................................................31 Troubleshooting ......................................................................................................................33 : for digital channels only 3 GB Start-up Guide 1: Checking the accessories Mains lead (1) (only for KDL-40T26xx, KDL-40S28xx) Coaxial cable* (1) (only for KDL-40T26xx, KDL40S28xx) Remote RM-ED009 (1) Size AA batteries (R6 type) (2) Support belt (1) and screws (2) 2: Connecting an aerial/ VCR Connecting an aerial Coaxial cable* To insert batteries into the remote Push and lift the cover to open. Connecting an aerial and VCR ~ · Observe the correct polarity when inserting batteries. · Do not use different types of batteries together or mix old and new batteries. · Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority. · Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. · Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. Coaxial cable* Scart lead (not supplied) Coaxial cable (not supplied) VCR 4 GB 3: Preventing the TV from toppling over 6: Selecting the language and country/region Start-up Guide 4: Connecting the cables 3,4 1 KDL-40T26xx KDL-40S28xx 2 3 Connect the TV to your mains socket (220-240V AC, 50Hz). Press 1 on the TV (top side). When you switch on the TV for the first time, the Language menu appears on the screen. Press F/f to select the language displayed on the menu screens, then press . 5: Bundling the cables Auto Start Up Language Country Select: Confirm: Continued 5 GB 4 Press F/f to select the country/region in which you will operate the TV, then press . ~ When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts in step 4 (page 6), the time must be set after performing step 4. Auto Start Up Language Country Detaching the TableTop Stand from the TV ~ Select: Confirm: Back: If the country/region in which you want to use the TV does not appear in the list, select "-" instead of a country/region. Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. 7: Auto-tuning the TV 1 Before you start auto-tuning the TV, insert a pre-recorded tape into the VCR connected to the TV (page 4) and start play back. The video channel will be located and stored on the TV during auto-tuning. If no VCR is connected to the TV, skip this step. KDL-40T26xx KDL-40S28xx KDL-32T26xx KDL-32S28xx 2 Press . Do you want to start automatic tuning? Back: Start: Cancel: MENU The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial connections and press to start auto-tuning again. 3 When the Programme Sorting menu appears on the screen, follow the steps of "Programme Sorting" (page 26). If you do not change the order in which the analogue channels are stored on the TV, go to step 4. 4 Press MENU to exit. The TV has now tuned in all the available channels. 6 GB Safety information Installation/Set-up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation · The TV set should be installed near an easily accessible mains socket. · Place the TV set on a stable, level surface. · Only qualified service personnel should carry out wall installations. · For safety reasons, it is strongly recommended that you use Sony accessories, including: ­ Wall-mount bracket SU-WL500 Installed with stand 30 cm 10 cm 10 cm 6 cm Leave at least this space around the set. · To ensure proper ventilation and prevent the collection of dirt or dust: ­ Do not lay the TV set flat, install upside down, backwards, or sideways. ­ Do not place the TV set on a shelf, rug, bed or in a closet. ­ Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. ­ Do not install the TV set as shown below. Transporting · Before transporting the TV set, disconnect all cables. · Two or three people are needed to transport a large TV set. · When transporting the TV set by hand, hold it as shown on the right. · When lifting or moving the TV set, hold it firmly from the bottom. Do not put stress on the LCD panel. · When transporting the TV set, do not subject it to jolts or excessive vibration. · When transporting the TV set for repairs or when moving, pack it using the original carton and packing material. Air circulation is blocked. Air circulation is blocked. Wall Wall Ventilation · Never cover the ventilation holes or insert anything in the cabinet. · Leave space around the TV set as shown below. · It is strongly recommended that you use a Sony wallmount bracket in order to provide adequate air-circulation. Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: Connect the TV set using a three-wire grounding type mains plug to a mains socket with a protective earthing connection (only for KDL-40T26xx, KDL-40S28xx). ­ Use only Sony mains leads, not those of other brands. ­ Insert the plug fully into the mains socket. ­ Operate the TV set on a 220-240 V AC supply only. ­ When wiring cables, be sure to unplug the mains lead for your safety and care not to catch your feet on the cables. ­ Disconnect the mains lead from the mains socket before working on or moving the TV set. ­ Keep the mains lead away from heat sources. ­ Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire. Installed on the wall 30 cm 10 cm 10 cm 10 cm Leave at least this space around the set. Continued 7 GB Notes · Do not use the supplied mains lead on any other equipment. · Do not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken. · Do not modify the mains lead. · Do not put anything heavy on the mains lead. · Do not pull on the mains lead itself when disconnecting the mains lead. · Do not connect too many appliances to the same mains socket. · Do not use a poor fitting mains socket. When: ­ Mains lead is damaged. ­ Poor fitting of mains socket. ­ TV set is damaged by being dropped, hit or having something thrown at it. ­ Any liquid or solid object falls through openings in the cabinet. Precautions Viewing the TV · View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes. · When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result. Prohibited Usage Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malf ...