2-685-145-03(1) · English This manual is for use with several different lenses. This lens is designed for Sony cameras. Condensation If your lens is brought directly from a cold place to a warm place, condensation may appear on the lens. To avoid this, place the lens in a plastic bag or something similar. When the air temperature inside the bag reaches the surrounding temperature, take the lens out. Focus-hold button (See illustration ­.) While the focus-hold button is pressed, auto focus function is suspended and the focus is fixed for shooting. · The function of the focus-hold button can be changed on cameras with custom function capability. Refer to the camera manuals for details. /Lens for Digital Single Lens Reflex Camera/Objectif pour appareil photo numérique reflex à objectifs interchangeables/ /Operating Instructions/Mode d'emploi/Manual de instrucciones/ (Sonnar T 135mm F1.8 ZA ) ( · · KK-CA · ) This lens was developed jointly by Carl Zeiss and Sony Corporation and mount cameras. This lens is produced according to the designed for Sony strict standards and quality assurance system of Carl Zeiss. Cleaning the lens · Do not touch the surface of the lens directly. · If the lens gets dirty, brush off dust with a lens blower and wipe with a soft, clean cloth (Cleaning Cloth KK-CA (optional) is recommended). · Do not use any organic solvent, such as thinner or benzine, to clean the lens or the camera cone. Depth-of-field scale When focus is set on a subject, anything at that same distance will appear sharp, and anything within a certain range before and beyond the subject will also appear in focus; this is called depth of field. Depth of field depends on the subject distance and aperture you choose and is indicated by the lines on the depth-of-field scale corresponding to the aperture. · The depth-of-field scale is for 35mm-format cameras. The depth-of-field is shallower when you use Digital Single Lens Reflex Cameras equipped with an APS-C sized image sensor. WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. Do not directly look at the sun through this lens. Doing so might harm your eyes or cause loss of eyesight. Keep the lens out of reach of small children. There is danger of accident or injury. · ( 85mm F1.4 ZA) 1 5 2 6 3 Planar T 4 7 · 35mm APS-C Names of parts (The illustration is Planar T 85mm F1.4 ZA.) 1···Focusing ring 2···Distance index 3···Depth-of-field scale 4···Lens contacts 5···Mounting index 6···Distance scale 7···Focus-hold button Planar T 85mm F1.4 ZA Sonnar T 135mm F1.8 ZA SAL85F14Z/135F18Z ©2006 Sony Corporation Printed in Japan ( ­ ) · 1 · (2) (1) (2) 2 · · 1 Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Attaching/detaching the lens To attach the lens (See illustration ­.) 1 2 Remove the rear and front lens caps and the camera body cap. · You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2). Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. · Do not press the lens release button on the camera when mounting the lens. · Do not mount the lens at an angle. 2 · · For the customers in the U.S.A. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. To remove the lens (See illustration ­.) While pressing and holding the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. ( ­ ) CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Attaching lens hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. · · NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Fit the lens hood into the mount on the end of the lens barrel and rotate the lens hood clockwise until it clicks. · When using a built-in camera flash, make sure to remove the lens hood to avoid blockage of the flash light. · When storing, turn over the lens hood and place it onto the lens backwards. · 1 2 3 7 Focusing When using the auto focus, the camera focuses the lens automatically. · Even when the auto focus is set, the focusing ring may rotate if you move it unintentionally. Only rotate the focusing ring manually when the camera is set to the direct manual focus, otherwise a malfunction may result. · 4 · ....................... ( 0570-00-0770 PHS ( ) .....0466-38-0231 6 5 ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. When focusing manually, set your camera to the manual focus and rotate the focusing ring while looking through the viewfinder. The focus signal in the viewfinder indicates the current condition of the focus. · The focusing ring can be rotated slightly past the infinity to provide accurate focusing under various operating temperatures. Do not rotate the focusing ring all the way to the end when focusing manually even at infinity. Look through the viewfinder and set the focus precisely. (Sonnar T 135mm F1.8 ZA only) ­1 · 9 9 8 5 For the customers in Canada This Class B digital apparatus complies with Canadian ICES-003. · · · · Notes on use · Do not leave the lens in direct sunlight. If sunlight is focused onto a nearby object, it may cause a fire. If circumstances necessitate leaving the lens in direct sunlight, be sure to attach the lens cap. · Be careful not to subject the lens to mechanical shock while attaching it. · Always place the lens caps on the lens when storing. · Do not keep the lens in a very humid place for a long period of time to prevent mold. · Hold both the camera and lens, when you carry the camera with the lens attached. · Do not hold the camera by the lens part extended for focusing, etc. · Do not touch the lens contacts. If dirt, etc., gets on the lens contacts, it may interfere or prevent the sending and receiving of signals between the lens and the camera, resulting in operational malfunction. Specifications Name (Model name) Planar T 85mm F1.4 ZA (SAL85F14Z) Sonnar T 135mm F1.8 ZA (SAL135F18Z) Equivalent 35mm-format focal length*1 (mm) 127.5 Lens groupselements Angle of view 1*2 Angle of view 2*2 Minimum focus*3 (m (feet)) Maximum magnification (×) Minimum f-stop Filter diameter (mm) Dimensions (maximum diameter × height) (mm (in.)) Approx. 81×75 (3 1/4×3) Approx. 88×114.5 (3 1/2×4 5/8) Mass (g (oz.)) (1) (2) · 35mm · ( ) * (mm) 127.5 7-8 29 19 1 1* 2 2* 2 * (m) 0.85 3 () 0.13 F22 (mm) (g) (mm) 81 75 640 ­2 1 *1 *2 *3 · · Planar T 85mm F1.4 ZA (SAL85F14Z) Sonnar T 135mm F1.8 ZA (SAL135F18Z) 35mm 1 35mm 72 7-8 29° 19° 0.85 (2.8) 0.13 f/22 72 Approx. 640 (22 5/8) Approx. 995 (35 1/8) 202.5 8-11 18 12 0.72 0.25 F22 77 88 114.5 995 202.5 8-11 18° 12° 0.72 (2.4) 0.25 f/22 77 Precaution for flash use APS-C 2 APS-C 2 With certain of lens/flash combinations, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture. When using a built-in camera flash, make sure to remove the lens hood and shoot from at least 1 m (3.3 feet) away from your subject. *1 The value for equivalent 35mm-format focal length is based on Digital Single Lens Reflex Cameras equipped with an APS-C sized image sensor. *2 The value of angle of view 1 is based on 35mm-format cameras, and that of angle of view 2 is based on Digital Single Lens Reflex Cameras equipped with an APS-C sized image sensor. *3 Minimum focus is the shortest distance from the image sensor to the subject. · This lens is equipped with a distance encoder. The distance encoder allows more accurate measurement (ADI) by using a flash for ADI. · Depending on the lens mechanism, the focal length may change with any change of the shooting distance. The focal length assumes the lens is focused at infinity. ADI ADI Vignetting When you use lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. (1) (1) (1) (1) (1) Included items: Lens (1), Front lens cap (1), Rear lens cap (1), Lens hood (1), Lens case (1), Set of printed documentation Designs and specifications are subject to change without notice. is a trademark of Sony Corporation. Company names and company product names are trademarks or registered trademarks of those companies. 1 2 3 7 Français Ce manuel est destiné à être utilisé pour plusieurs objectifs différents. Cet objectif est conçu pour les appareils photo Sony. Cet objectif a été développé en collaboration par Carl Zeiss et Sony Corporation. . Cet objectif est fabriqué selon Il est conçu pour les appareils à monture Sony les normes strictes et le système d'assurance qualité de Carl Zeiss. Noms des pièces (L'illustration représente le Planar T 85mm F1.4 ZA.) 1···Bague de mise au point 2···Index de distance 3···Echelle de profondeur de champ 4···Contacts de l'objectif 5···Repère de montage 6···Echelle de mise au point 7···Bouton de désactivation de la mise au point Español Este manual es aplicable a distintos objetivos. Este objetivo está diseñado para cámaras de Sony. Este objetivo ha sido desarrollado conjuntamente por Carl Zeiss y Sony de montura Sony El objetivo se Corporation y está diseñado para cámaras ha fabricado de acuerdo con las normas estrictas y el sistema de garantía de calidad de Carl Zeiss. Nombres de las piezas (la ilustración corresponde al modelo Planar T de 85mm F1.4 ZA). 1···Anillo de enfoque 2···Índice de distancia 3···Escala de profundidad de campo 4···Contactos del objetivo 5···Índice de montaje 6···Escala de distancia 7···Botón mantener-enfoque 4 Fixation/retrait de l'objectif Fixation de l'objectif (Voir l'illustration ­.) AVERTISSEMENT 6 5 Pour réduire les risques d'incendie ou d'électrocution, tenir cet appareil à l'abri de la pluie et de l'humidité. Ne regardez pas directement le soleil à travers le convertisseur. Ceci peut causer des lésions visuelles ou entraîner la perte de la vue. Gardez l'objectif hors de portée des enfants en bas âge. Il peut présenter des risques d'accident ou de blessure. Traitement des appareils électriques et électroniques en fin de vie (Applicable dans les pays de l'Union Européenne et aux autres pays européens disposant de systèmes de collecte sélective) Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit ne doit pas être traité avec les déchets ménagers. Il doit être remis à un point de collecte approprié pour le recyclage des équipements électriques et électroniques. En s'assurant que ce produit est bien mis au rebut de mani� ...