|
Need help using a product?
|
|
|
|
User manual SONY SPK-PC4
Diplodocs help download the user guide SONY SPK-PC4 .
This product, although classified under the brand SONY, may have been manufactured by AIWA, SONY CREATIVE SOFTWARE after mergers, acquisitions, or a change in name.
Preview of the first 3 pages of manual
You either have JavaScript turned off or an old version of Adobe Flash Player Get the latest Flash Player.
Manual abstract: user guide SONY SPK-PC4
Detailed instructions for use are in the User's Guide. 3-069-204-13(1)
D
1
POWER
VCR
LOCK
Sports Pack
Operating Instructions Mode d'emploi Manual de instrucciones Gebruiksaanwijzing
OFF CAMERA (CHARGE)
MEMORY
2
Use metal parts of shoulder belt. Utilisez les pièces métalliques de la bandoulière.
SPK-PC4
Sony Corporation ©2001 Printed in Japan
3
4
OFF P
C
YER LA
A
mounting shoe sabot de montage A B C2 model modèle DCR-PC4E/PC5/PC5E DCR-PC1/PC1E/PC2E/PC3/PC3E DCR-PC6E/PC9/PC9E/PC101/PC101E
AM
E RA
5
B
Mounting shoe A, C2 Sabot de montage A, C2
Tripod screw plate Plaquette à vis
Mounting shoe A, C2 Sabot de montage A, C2
Mounting shoe B Sabot de montage B
Tripod screw plate Plaquette à vis
7
1
Mounting shoe B Sabot de montage B
2
To disassemble after using Démontage après emploi
C
4
8
English
Owner's Record
The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. SPK-PC4 Serial No. For the customers in Germany Directive: EMC Directive 89/336/EEC. 92/31/EEC This equipment complies with the EMC regulations when used under the following circumstances: · Residential area · Business district · Light-industry district (This equipment complies with the EMC standard regulations EN55022 Class B.) This mark indicates that this products is a genuine accessory for Sony video products. When purchasing Sony video products, Sony recommends that you purchase accessories with this "GENUINE VIDEO ACCESSORIES" mark. Usable at the depth as low as 2 meters (6.5 feet) under water. For using your video camera recorder with this pack, refer to the operating instructions of the recorder. The splash-proof sports pack SPK-PC4 is waterand moisture- resistant, making it possible to use the Sony Digital Handycam camcorder such as DCR-PC1/PC1E/PC2E/PC3/PC3E/PC4E/ PC5/PC5E/PC6E/PC9/PC9E/PC101/PC101E, in the rain or at the beach.
· The useful life of the waterproof gasket depends upon the maintenance and the frequency of use, but we recommend changing it once a year. To replace the waterproof gasket, please consult the nearest Sony dealer. Be sure to check the water leakage after replacing the waterproof gasket.
DInstalling the Camcorder
1 Set the POWER switch of the camcorder to OFF. 2 Attach the camera mounting shoe.
Use the metal parts of shoulder strap as shown in the illustration.
HWhen Shooting with the LCD
Screen
1 Open the mirror hood. 2 Open the wings and insert the projections into each hole.
Checking for the water leakage after replacing the waterproof gasket
Check for the water leakage before installing the camcorder. Close the sports pack without installing the camcorder, and keep the sports pack submerged under water at a depth of about 15 cm (6 inches) for about 3 minutes and then check for water leakage.
3 Attach the reflex prevention ring.
Attaching this ring to a certain extent prevents reflection of the lens ring section of the camcorder in the front glass.
To close the mirror hood
Close the lower wing first.
Notes
· When opening the LCD panel, the picture does not appear in the viewfinder. (DCRPC3/PC3E/PC5/PC5E only) · Do not hold the mirror hood directly for shooting. · A part of the LCD screen may be covered with the unit depending on the camcorder.
4 Check the POWER switch of the sports pack is set to OFF. 5 Release the buckle.
1 Slide the unlock button in the direction of the arrow, and release the buckle. 2 Open the side body. The black rubber part is a spacer. Keep the spacer since you will need it to store the unit.
After Recording
After recording in a location subject to sea breezes, wash the sports pack with fresh water with the buckles fastened thoroughly, then wipe with a soft dry cloth. It is recommended that you submerge the sports pack in fresh water for about 30 minutes. If it is left with salt on it, metal portions may be damaged or rust may form and cause water leakage. If you get suntan lotion or other greasy substances on your sports pack, wash it off with tepid water. Clean the inside of the pack with a soft dry cloth. Do not wash the inside of the pack. Do not use any type of solvent such as alcohol, benzine or thinner for cleaning, as this might damage the finish.
IRecording a Still Picture
You can record a still picture like a photograph.
6 Preparing the sports pack
1 Grease the waterproof gasket. Check there are no dust, sand or cracks on the waterproof gasket or the surface where it touches, and grease them slightly. Closing the lid with sand or dust attached to it may scratch the lid and allow water to enter. 2 Coat the front glass with anti-fogging lens solution. The inside surface of the glass on the front of the sports pack becomes foggy. So, be sure to coat the surface of the glass with the supplied anti-fogging lens solution.
1 Turn the POWER switch to CAMERA. 2 Press PHOTO button.
The still picture is recorded.
Notes
· You cannot check the still pictures by pressing PHOTO button of the sports pack lightly. · While using the sports pack, you can not use NightShot function. · Some video camera recorders have only the tape photo recording function.
Anti-fogging lens solution
Coat the surface of the glass with the supplied anti-fogging lens solution. This is effective in preventing from fogging.
JPlaying Back with the
Remote Commander
You can play back pictures on the LCD screen, using the Remote Commander (supplied with your camcorder).
Notice
· Before you start recording, make sure that the camcorder is working correctly and there is no water leakage. · Sony does not accept liability for damage to the camcorder, battery, etc., when using the sports pack or for the cost of recording if water leakage occurs as a result of incorrect use. · Before you use the camcorder, check the waterproof gasket for any sand or dirt and to make sure that it is not loose or that nothing is wedged in the gasket. Water leakage will occur if the camcorder is used in these states.
How to use the anti-fogging lens solution
Apply 1 or 2 drops of the liquid to the front glass and the glass of the eye cup and wipe evenly to spread the liquid out by using swabs, a soft cloth or tissue paper.
7 Connect the remote control plug to LANC (remote) jack sliding the camera mounting shoe a short way into the sports pack (1), and the microphone plug to MIC (plug in power) jack (2). 8 Install the camcorder.
Check the lens and the LCD screen is clean before installing the camcorder. Push the camera mounting shoe until it clicks.
1 Set the mirror hood.
See "H When Shooting with the LCD Screen".
2 Turn the POWER switch to PLAYER. 3 Press N PLAY on the remote.
Use the remote commander for all other functions including STOP, REW and FF.
When storing the sports pack
· Attach the spacer supplied with your sports pack to prevent wear of the waterproof gasket. (See illustration M.) · Prevent dust from collecting on the waterproof gasket. · Avoid storing the sports pack in a cold, very hot or humid place, or together with naphthalene or camphor, as these conditions might damage the unit.
9 Close the side body.
Secure the side body, and fasten the buckle until it clicks.
Note
The picture on the mirror looks turned sideways.
Notes
· You cannot change the battery pack after attaching the mounting shoe (DCR-PC1/ PC1E/PC2E/PC3/PC3E only). · Fold the grip strap as illustrated, and attach the camera mounting shoe. (See illustration DÂ2.) (DCR-PC5/PC5E/PC6E/PC9/PC9E only) · Do not tighten the reflex prevention ring too rightly. This may maker it harder for you to remove the reflex prevention ring. · When closing the side body, be careful not to pinch the cable. Otherwise, these parts may be damaged or water may leak in. When using DCR-PC1/PC1E/PC3/PC3E/ PC5/PC5E, fit the jack cover rightly to S video jack before installing the camcorder. Otherwise, the jack cover may rotate and be pinched.
KRemoving the Camcorder
Before opening the sports pack, wipe moisture off the sports pack and yourself. Do not allow water on the camcorder.
Precaution
· Do not subject the front glass to strong shock, as it may crack. · Avoid opening the sports pack in the sea or at the beach. Preparation such as installing and changing a cassette tape should be done in a place with low humidity and no salty air. · Do not throw the sports pack into the water. · Avoid using the sports pack under the following situations:  in a very hot or humid place.  in water hotter than 40°C (104°F).  at temperatures lower than 0°C. In these situations moisture condensation or water leakage may occur and damage the equipment. · Use the sports pack for no longer than one hour at a time in temperatures above 35°C (95°F). · Do not leave the sports pack under direct sunlight for a long period of time. If you cannot avoid leaving the sports pack under direct sunlight, be sure to cover the pack with a towel or other protection.
1 Set the POWER switch to OFF. 2 Release the buckle and open the side body, with mirror hood side up.
Close the mirror hood firmly before performing the step above.
Specifications
Material Plastic (PC, ABS), glass Waterproof Waterproof gasket, buckle Available operations with the unit attached · Turning on/off the POWER switch when recording or playing back · Recording a still image on a tape · Zooming Built-in microphone Stereo Dimension Approx. 150 × 170 × 110 mm (w/h/d) Mass Approx. 550 g (only sports pack) Supplied accessories Shoulder strap (1) Camera mounting shoe A(1)/B(1)/C2 (1) Tripod screw plate (1, pre-installed on the camera mounting shoe C2) Reflex prevention ring (1) Grease (1) Anti-fogging lens solution (1) Operating Instructions (1)
Design and specifications subject to change without notice.
3 Take out the camcorder and disconnect the plugs.
1 Unlock the camera mounting shoe by picking up the knob. 2 Take out the camcorder. 3 Disconnect the remote control plug and the MIC plug. After removing the camcorder, put the plugs in the plug holder inside of the sports pack.
EHow to place the connecting
cord
If the connecting cord is not placed correctly when closing the side body, water leakage may occur. Place the cord correctly. (See illustration E.)
4 Detach the camera mounting shoe and the reflex prevention ring.
After using the camera mounting shoe, attach it to the sports pack.
FPreparing the Sports Pack
1 Adjust the grip strap.
Holding the sports pack so that the tips of your finger can easily touch the POWER switch, START/STOP button and ZOOM button, pull the strap to adjust its length.
Notes
· Be sure to disconnect the plugs before taking out the camcorder. Otherwise, the plugs may be damaged. · If sun oil is on the sports pack, be sure to wash it off thoroughly using lukewarm water. If the sports pack is left with sun oil on its body, the surface of the sports pack may become discolored or damaged. · After using the sports pack, read Maintenance and Precautions for storing.
Before You Begin
To make sure that you do not miss good shooting opportunities, go over the following checklist before installing your camcorder into the sports pack.
2 Attach the shoulder strap.
The Sony mark should be on the outside.
Note
When recording with this pack, we recommend you to use the battery pack of larger capacity. However, you cannot use the battery pack NPFM90/FM91. Battery pack Cassette tape Fully charged. · The tape length will cover the planned recording time. · The tape is wound to the point where you want to start recording. · The safety tab on the cassette is in the correct position. (The red portion is not visible.) Waterproof gasket · No scratches or cracks. No dust, sand or hair around the gasket. · Correctly set in the groove. (See "Note on the Waterproof gasket" for details.)
Using the Sports Pack GRecording
Preparing
For details, please refer to the operating instructions supplied with your camcorder.
1 Turn the POWER switch to CAMERA. 2 Press START/STOP button to start recording.
ASelecting the Camera
Mounting Shoe
You have a choice of three types of camera mounting shoe, depending on the location of the screw hole for attaching the camera mounting shoe of your camcorder.
To finish recording
Press START/STOP button then turn the POWER switch to OFF.
To stop recording
Press START/STOP. Press it again to resume recording.
BPreparing the Camera
Mounting Shoe
Align the tripod screw plate to the notch of the mounting shoe A,B or C2. The tripod screw plate is pre-installed on the camera mounting shoe A.
Zooming
Press ZOOM. · Keep the W side pressed for wide-angle. · Keep the T side pressed for telephoto. Press it gently for a relatively slow zoom.
Notes on recording
· If you leave the camcorder for 5 minutes or more with a cassette inserted in Standby mode, the camcorder goes off automatically. This prevents battery and tape wear. To resume Standby mode, turn the POWER switch to OFF ...
|