User manual SPECO DVR-4CF

DVR-4CF USER MANUAL Speco Technologies 200 New Highway Amityville, NY 11701 631-957-8700 INDEX 1. SAFETY PRECAUTIONS ........................................................................... 2 2. INTRODUCTION ........................................................................................ 3 2.1 PRODUCT INTRODUCTION .......................................................................................3 2.2 APPLICATION .........................................................................................................3 3. FEATURES ................................................................................................. 4 4. PACKING LIST .......................................................................................... 5 5. INSTALLATION......................................................................................... 6 5.1 CONNECTORS ON THE REAR PANEL .........................................................................6 6. NAME and FUNCTION of EACH PART ................................................................. 7 6.1 FRONT PANEL BUTTONS AND CONTROLS .................................................................7 6.2 REAR PANEL BUTTONS AND CONTROLS...................................................................9 7. OPERATING PROCEDURE ...................................................................... 10 7.1 POWER ON........................................................................................................... 10 7.2 MONITORING MODE ............................................................................................. 10 7.3 RECORD DISPLAY................................................................................................. 11 7.4 PLAYBACK DISPLAY............................................................................................. 12 7.5 NOTE! ................................................................................................................. 13 8. SYSTEM SETUP....................................................................................... 14 8.1 MENU.................................................................................................................. 14 8.2 SYSTEM SETUP .................................................................................................... 15 8.2.1 TIME SET........................................................................................................ 16 8.2.2 PASSWORD SET ............................................................................................. 17 8.2.2.1 PASSWORD CHANGE ................................................................................. 18 8.3 CAMERA SETUP ................................................................................................... 20 8.3.1 CAMERA SETTING ........................................................................................ 22 8.4 RECORD SETUP .................................................................................................... 23 8.4.1 RECORD MODE .............................................................................................. 24 8.5 BUZZER SETUP..................................................................................................... 26 8.5.1 SENSOR TYPE: ............................................................................................... 27 8.6 EVENT LIST ......................................................................................................... 28 8.6.1 TIME SEARCH ................................................................................................ 29 8.6.2 EVENT SEARCH ............................................................................................. 30 8.7 CF CARD SETUP .................................................................................................. 31 8.7.1 SELECT TIME ................................................................................................. 32 8.7.1.1 COPY ........................................................................................................... 33 8.7.2 FORMAT/ ERASE ........................................................................................... 34 8.8 HARD DRIVE SETUP ............................................................................................. 35 8.8.1 HDD FORMAT: ............................................................................................... 36 The author assumes no responsibility for any errors or omissions that may appear in this document nor does it make a commitment to update the information herein. V1.0 P/N:040506-CS 1 DVR-4CF 1. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTIO N : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. It is advised to read the Safety Precaution Guide through carefully before operating the product, to prevent any possible danger. WARNING: Alert the user to the presence of un-insulated "dangerous voltage". CAUTION: Alert the user the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the appliance. The power cord is the main power connection. Therefore, constantly plug and unplug of the power cord might result in malfunction of the product. Do not install the product in an environment where the humidity is high. Unless the product is waterproof or weatherproof, otherwise poor image quality may quality. Do not drop the product or subject them to physical shocks. Except for vandal-proof or shockproof product, otherwise malfunctions may occur. Never keep the product to direct strong light. It can damage the product. Do not spill liquid of any kind on the product. If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that corrode the electronic components. Do not expose to extreme temperatures. Use the product at temperatures within -10C ~ +50C. 2 DVR-4CF 2. INTRODUCTION 2.1 Product Introduction World leading technology not only perfect for office safety, personnel home security, public environments, industry surveillance, school, and so on. Quick and simple installation, the best choice for your own ultimate protection. The sate-of-art 4-channel digital recording system, equipped with advanced embedded CPU operating system, powerful MPEG4 compression technology. Standalone type DVR system that is based on embedded OS, replacing the conventional DVR. The most user-friendly surveillance System (supports Chinese user interface), user can operate the functions by controlling the front panel, using time and event to playback recorded materials, efficient live recording and playback functions, convenient CF card function that supports ATA HDD, and the most useful storage device of removable Hard Disc Drive. Password protection on remote controlling. What more can you expect! 2.2 Application Security: ATM (auto teller machine), bank, gas station, shop and parking lot. Factory/ Office: Factory, warehouse, remote technology support, conference room, and outdoor parking lot. Education/ Military/ Government Organization: Important facilities, important areas, rapid transit system, and railroad safety. Recreation/ Activities: Sports and news broadcast. Home: Elevator, doorway, community safety, and hotels. Hospital/ Kindergarten: Hospital and isolated ward, home for the aged, kindergarten, and baby nourishing center. 3 DVR-4CF 3. FEATURES Auto video input detection Auto detects video input (NTSC/ PAL) and supports combine use of color and b/w cameras. Supports high quality digital video recording Adopts MPEG4 compression technology (NTSC: 30fps/ PAL: 25fps). Video Size Video Resolution · NTSC: 640x 224 · PAL: 640x 272 Monitoring Resolution · NTSC: 720x 480 · PAL: 720x 576 Replaces the conventional VCR. Stores video on hard disks instead of VCR tapes. Large disk capacity, there is no need to replace the recording medium. Built-in motion detection function. Motion detection sensitivity rate may be setup under motion detection function. High efficient event recording, saving storage capacity. Motion detection function enables recording only when system detects motion, thus increases the amount of time available for recording. Easy access to the desired record. Time & date search supports instant retrieval of images and alarm event search makes searching simpler. Data can be stored in CF card. Cards inserted in the CF card slot makes it easier to back up recordings and transfer images to a PC. Removable hard disk box. Removable hard drive mechanism allows you to backup important data with ease. Live monitoring through internet from anywhere (optional). Built-in TCP/ IP network interface (auto detects and switches to 10/ 100Base T). 4 DVR-4CF 4. PACKING LIST Check to make sure all of the items shown below are included in your product package. If something is missing, contact your dealer as soon as possible. (1) DVR (digital video recorder) (2) Power adapter (3) Power Cord (Plug type differs depending on area) 5 DVR-4CF 5. INSTALLATION 5.1 Connectors on the Rear Panel Please setup the connection by following the illustration shown below (network is an optional function): 6 DVR-4CF 6. NAME and FUNCTION of EACH PART 6.1 Front Panel Buttons and Controls 1. Removable HDD Box 2. Front Panel Button Definition (2) QUAD (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) : Press this button under monitoring or quad mode to show quad display. CH 1 : Press this button under monitoring or record mode to show CH 1 in full-screen. CH 2 : Press this button under monitoring or record mode to show CH 2 in full-screen. CH 3 : Press this button under monitoring or record mode to show CH 3 in full-screen. CH 4 : Pres this button under monitoring or record mode to show CH 4 in full-screen. SEQ : Press this button under monitoring or record mode, all channels are displayed full-screen in turn repeatedly. MENU : Press this button under monitoring mode to enter setup menu and under setup mode to return to the previous selection. ENTER : Press this button to confirm after data input. UP/ LEFT : Press this button to move the cursor up or down. DOWN/ RIGHT : Press this button to move the cursor left or right. REC LED : LED lights while recording. 7 DVR-4CF (13) (14) (15) (16) (17) (18) (19) (20) (21) PLAY LED MENU LED STOP LED REC STOP PAUSE REW PLAY F.F. : : : : : : : : : LED lights while playing playback. LED lights when entering setup menu. LED lights when entering stop mode. Press this button under monitoring mode to start recording. Press this button under playback to return to start monitoring. Press this button under playback to pause playback. Press this button under playback to start reverse scanning. Press this button under playback mode to start playback. Press this button under playback mode to start fast-forward scanning. (22) CF-CARD SLOT 8 DVR-4CF 6.2 Rear Panel Buttons and Controls (1) RJ45: Internet connection terminal (optional). (2) Video Input [VIDEO IN]: Connect to cameras. (3) DC 12V (4A) [Power Input terminal]: power socket. (4) S-Video Output [S-VIDEO OUT]: Connect to the monitor. (5) Video Output [VIDEO OUT]: Connect to the monitor. (6) Video Loop [VIDEO LOOP]. (7) I/O Block [I/O BLOCK]: Terminal function description is shown below. No. 1 2 3 4 5 6 7 8 9 10 11 (8) Cooling Fan. Name GND ALARM 1 GND ALARM 2 GND ALARM 3 GND ALARM 4 N.O. COM N.C. Function Ground Terminalsignal Alarm Input Terminal Ground Terminalsignal Alarm Input Terminal Ground Terminalsignal Alarm Input Terminal Ground Terminalsignal Alarm Input Terminal Alarm Output (Normal Open) Alarm Output Terminal (NC/ NO COM) Alarm Output (Normal Close) 9 DVR-4CF 7. OPERATING PROCEDURE 7.1 Power On Each time after power on, DVR will auto-detect its peripherals (self-testing, warm-up, auto detects the hard disk and starts CF-card testing, and etc.) The system will detect the video input and judge whether the video system is NTSC or PAL. When video input is unable to be detected (VIDEO LOSS), the system will send out an alarm, press-on any button to stop the alarm (it will not affect the actual recording). 7.2 Monitoring Mode This mode is a default for our system after power on. Under this mode, system supports live view for monitoring. PressRECbutton, the system enters the record mode, press PLAY button to start playback, press MENU button to enter the menu setup display. During record or playback, pressSTOPbutton to stop the current activity and returns to monitoring mode. Under main menu, pressMENU to return to monitoring mode. During playback, press STOP button to return to monitoring mode. Press again to change the speed (FF1, FF2 or FF3), or pressREWbutton to start reverse playback. To reset (under quad or single display), pressPAUSEbutton 5 times, the message ALL SETTING DATA IS INITIALIZED. be displayed by flashing 3 times, will and after reset the password will be set as default value (111111). When reset procedure has been completed, the message" DVR RESET COMPLETED. TURN OFF AND ON THE DVRwill be displayed, then please restart the DVR. 10 DVR-4CF 7.3 Record Display Note:CH1: No block figure next to CH1 indicates that it is not recording. EACH: Record Type QUAD: Record Type (T): TIMER RECORD (A): ALARM RECORD (M): MIX RECORD (): Currently under recording. VIDEO LOSS: Video input unable to be detected. CAMERA1: Name for CH 1. OFF: Channel is set to "OFF". 11 DVR-4CF 7.4 Playback Display TIME SEARCH HARD DRIVE: MASTER 03/11/27 18:20:42 - 03/11/27 19:32:32 >01 TIME 2003/11/27 18:20:42 02 TIME 2003/11/27 16:43:56 03 TIME 2003/11/27 15:07:11 (<,>) MOVE (ENTER)CHANGE (PLAY)PLAY (MENU) EXIT (FF)SELECT EVENT OR TIME >01 TIME Total 7 >07 1. First pressSTOPbutton to stop record, then pressPLAYbutton to enter search display. 2. Press FF button, then PLAY button to playback data from old to new. Use andbutton to move the cursor to the desired playback time, press PLAYbutton to start playback. 3. When wish to view recorded videos of a specific time, useFFbutton, orbutton, and ENTERbutton to make changes. 4. During playback press PAUSE button to pause and press PLAY button to play. 5. PressFFbutton to fast-forward playback. 6. PressREWbutton to reverse playback. 7. PressSTOPbutton to stop playback. 12 DVR-4CF 7.5 Note! 1. "Auto Sequence" function operates only during recording or under live status (Dwell Time: 5 seconds). Sequencing will bypass a channel with video loss if programmed accordingly (Example: Video Loss occurs on CH3, sequencing order: CH1CH2CH4QUAD). 2. To deactivate "Auto Sequence" function, press 1, 2, 3, 4, or QUAD. 3. Withdrawing the CF card, each time before the system (DVR) enters recording or playback status, it auto detect the hard disk (detection time is about 5 seconds and WD brand hard disk is about 30seconds). 4. When coping data from the hard disk to a CF card, make sure that the data has been completely copied onto the CF card, before withdrawing it from the slot. Otherwise, error may occur, system displays "CF CARD REMOVED", and auto returns to live display. 5. Camera name may only be viewed during recording display and under live display. 13 DVR-4CF 8. SYSTEM SETUP 8.1 Menu 1 (3) > SYSTEM SETUP CAMERA SETUP RECORD SETUP BUZZER SETUP EVENT LIST CF CARD SETTING HARD DRIVE SETUP (4) PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT (2) (1) MAIN MENU: Item subject (First menu layer does not have a subject). (2) Menu Layer Indication: The device consists of four menu layers. First Menu Layer (Main Menu) Second Menu Layer Third Menu Layer Fourth Menu Layer (3) Menu Operation and Setup Pressorbutton to move the cursor ( > ). PressENTERbutton enter the sub menu. PressMENUbutton: Under second or third menu layer, the system will return to the previous menu layer (second layer to first layer or third layer to second layer) and auto updates the modified data. Under main menu (first menu layer), the system will enter live mode. PressENTERbutton, to increase or decrease the setting values that has been highlighted. (4) Menu Layer Operation Guide 14 DVR-4CF 8.2 System Setup SYSTEM SETUP > TIME SET PASSWORD SET LOARD DEFAULT VERSION V1.0 PRESS(< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Pressandbutton to move the cursor. 3. PressENTERbutton to proceed. 4. PressMENUbutton to exit "System Setup". 5. "System Setupis situated on the second menu layer. Under this menu layer user may setup the system time, password, and return system to default value, etc (VERSION displayed represents the FIRMWARE version). 15 DVR-4CF 8.2.1 TIME SET TIME 2005/01/11 172306 ^ PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (^) position indicates the current time and date selected. 2. Useorbutton to move the cursor. 3. UseENTERbutton to setup time and date. 4. UseMENUbutton to exit "Time Setup". 16 DVR-4CF 8.2.2 PASSWORD SET PASSWORD SETUP > PASSWORD CHANGE MENU PASSWORD STOP REC PASSWORD OFF OFF PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Useandbutton to move the cursor to the desired item . 3. UseENTERbutton to make changes. 4. UseMENUbutton to exit "Password Setup". 5. When the password is setup to "ON", user will be requested to enter the correct password for entering from live display to menu selection (Default Password: 111111). 6. When password is setup to "ON", user will be requested to enter the correct password to stop recording (Default Password: 111111). 17 DVR-4CF 8.2.2.1 PASSWORD CHANGE CURRENT PASSWORD _ _ _ _ _ _ NEW PASSWORD _ _ _ _ _ _ CONFIRM PASSWORD _ _ _ _ _ _ PRESS (MENU) TO EXIT 1. PressENTERbutton to show the display above. 2. Enter the current password (CURRENT PASSWORD). 3. Enter new password (NEW PASSWORD). 4. Confirm the new password (CONFIRM PASSWORD). 5. When password change is successful, the system will display "PASSWORD CHANGED". Default Value: 111111 If password entered is incorrect, you will receive a message "NO PASSWORD CHANGED" to inform you (message flashes three times) and the system returns to "Password setup" selection. 18 DVR-4CF 8.2.3 LOAD DEFAULT PRESS (ENTER) TO RESET PRESS (MENU) TO EXIT 1. PressENTERbutton to show the display above. 2. Press ENTER button the message ALL SETTING DATA IS INITIALIZED will be displayed by flashing 3 times, and returns to default value. When reset procedure has been completed, the message"DVR RESET COMPLETED TURN OFF AND ON THE DVRwill be displayed, please restart the DVR. 3. PressMENUbutton to exit "Load Default Setup" selection. 19 DVR-4CF 8.3 Camera Setup CAMERA SETUP > CAMERA ENABLE CAMERA TITLE CAMERA SETTING CH1 TITLE CH2 TITLE CH3 TITLE CH4 TITLE 1234 ---CAMERA1 CAMERA2 CAMERA3 CAMERA4 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Pressandbutton to move the cursor. 3. PressENTERbutton to proceed. 4. PressMENUbutton to exit. 5. "Camera Setup" is situated on the second menu layer. Under this menu layer user may setup camera name (camera name for CH1, CH2, CH3 and CH4), standard camera setup, etc. 6. Press ENTER button to change the camera view combination (select to view the desired channel). (It consists of 16 different optional camera view combinations) 1) Select (- - - -), all cameras are disabled (no image display). 2) Select (1 2 3 4), all cameras are operational (quad image display). 3) Select (- - - 4), only camera four is operational (CH4 image display only). 7. When proceeding "CH1 TITLE", press ENTER button to show the display below: 20 DVR-4CF V CH1 TITLE CAMERA1 12345678 "V" indicates the position of the cursor. Press and button to move the cursor, and pressENTERbutton to change the title (maximum 8 characters). 8. All channel titles are setup the same way. Once the user formats the hard disk drive, the camera title returns to its default setting (CAMERA1/ CAMERA2/ CAMERA3/ CAMERA4). It is because this setup is stored in the hard disk drive. 21 DVR-4CF 8.3.1 CAMERA SETTING CAMERA SEUP > CAMERA SELECT RECORD ENABLE MOTION DETECTION MOTION SENSITIVITY HUE CONTRAST BRIGHTNESS CH1 ON ON 03 08 08 08 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Pressandbutton to move the cursor to the desired item. 3. PressENTERbutton to make changes. 4. PressMENUbutton to exit "CAMERA SETUP" selection. 5. CAMERA SELECT: PressENTERbutton to select the desired channel. 6. RECORD ENABLE: PressENTERbutton to switch the channel recording ON/ OFF. 7. MOTION DETECTION: PressENTERbutton to switch the motion detection function ON/ OFF. 8. MOTION SENSITIVITY: Press ENTER button to setup the motion sensitivity rate (5 sensitivity rate values, 01 most sensitive). 9. HUE: Press ENTER button to adjust the color of cameras (15 color adjustment values, default value: 08 ). 10. CONTRAST: Press ENTER button to adjust the camera contrast (15 contrast adjustment values, default value: 08). 11. BRIGHTNESS: PressENTERbutton to adjust camera brightness (15 color adjustment values, default value: 08 ). 22 DVR-4CF 8.4 Record Setup RECORD SETUP > RECORD TYPE VIDEO QUALITY TIME RECORD FRAMERATE MOTION RECORD FRAMERATE SENSOR RECORD FRAMERATE ALARM REC TIME RECORD MODE EACH NORMAL 04 15 15 10 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Useandbutton to move the cursor to the desired item. 3. UseENTERbutton to make changes. 4. UseMENUbutton to exit "RECORD SETUP" selection. 5. "Record Setup" is situated on the second menu layer. Under this selection user may setup the following function: Record Type, Video Quality, Time Record Framerate, Motion Record Framerate, Sensor Record Framerate, Alarm Record Time, and Record Mode. 6. RECORD TYPE: PressENTERbutton to select between "QUAD" and "EACH" mode. 7. VIDEO QUALITY: PressENTERbutton to select different quality recordings (HIGH, NORMAL or LOW). 8. TIME RECORD FRAMERATE: Press ENTER button to setup the recording speed when "T" mode is setup under schedule record mode. 9. MOTION RECORD FRAMERATE: Press ENTER button to setup different recording speeds per channel, suitable when the recording speed under 23 DVR-4CF schedule record mode is setup to "M" (mix) or "A" (alarm). 10. SENSOR RECORD FRAMERATE: PressENTERbutton to setup different recording speed, when a sensor device has been triggered (this setup is only active when the recording speed under schedule record mode is setup to "M"(Mix) or "A" (Alarm)). NTSC:30,15,10,7,5,4,3,2,1fps. PAL :25,12,8,6,4,3,2,1fps. 11. ALARM REC TIME: PressENTERbutton to setup sensor recording time after a sensor device has been triggered (this setup functions is only active when the recording speed under schedule record mode is setup to "A"(Alarm)). 8.4.1 RECORD MODE RECORD MODE T: TIME A: MOTION+SENSOR M: TIME+MOTION+SENSOR V < M A T T T T T T T T T T T T T T T T T T T TT > 0 3 6 9 12 15 18 21 24 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 24 DVR-4CF 1. Cursor (V) position indicates the current function selected. 2. Useandbutton to move the cursor to the desired item (time). 3. UseENTERbutton to make changes. 4. UseMENUbutton to exit "SECHDULE RECORD MODE" selection. 5. T: Time, indicates continuous record. 6. M: TIME+MOTION+SENSOR. (1) When motion has been detected, it will be recorded by "Motion Record Speed". (2) When sensor has been triggered, it will be recorded by "Sensor Record Speed". (3) Otherwise, it is recorded by "Time Record Speed". 7. A: MOTION+SENSOR (1) When motion has been detected, it will be recorded by "Motion Record Speed". (2) When sensor has been triggered, it will be recorded by "Sensor Record Speed". When both "MOTION" and "SENSOR" has been triggered, it will be recorded by "Motion Record Speed". 25 DVR-4CF 8.5 Buzzer Setup BUZZER SETUP > ALARM ALERT VIDEO LOSS ALERT HDD FULL ALERT BUZZER TIME RELAY OUT TIME SENSOR TYPE ON ON ON 05 05 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current selected position. 2. Pressandbutton to move the cursor to the desired item (time). 3. PressENTERbutton to proceed. 4. PressMENUbutton to exit "BUZZER SETUP" selection. 5. "BUZZER SETUPis situated on the second menu layer. Under this menu layer user may setup "ALARM ALERT", " VIDEO LOSS ALERT", " HDD FULL ALERT", " BUZZER TIME", " RELAY OUT TIME", and " SENSOR TYPE". 6. ALARM ALERT: PressENTERbutton to setup "ON" or "OFF", whether to trigger the alarm when motion event has been detected (this setup is only active when the system is under record status and schedule record is setup to "M"(Mix) or "A" (Alarm)). 7. VIDEO LOSS ALERT: Press ENTER button to setup "ON" or "OFF", whether to trigger the alarm when video loss has been detected (this setup is only active when the system is under record or live status). 26 DVR-4CF 8. HDD FULL ALERT: PressENTERbutton to setup "ON" or "OFF", whether to trigger the alarm when hard disk is full (this setup is only active when the system is under record status). 9. BUZZER TIME: PressENTERbutton to setup the buzzer time to continuous (CONT), and press any button to release this setup. 10. RELAY OUT TIME: PressENTERbutton to setup the relay out time to continuous (CONT), and press any button to release this setup. 8.5.1 SENSOR TYPE: SENSOR SETUP > CHANNEL-1 CHANNEL-2 CHANNEL-3 CHANNEL-4 NOT INSTALLED NOT INSTALLED NOT INSTALLED NOT INSTALLED PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current selected position. 2. Press and button to move the cursor to the desired item (CH1~CH4). 3. PressENTERbutton to make changes. 4. PressMENUbutton to exit "SENSOR SETUP" selection. 5. CHANNEL-1: Press ENTER button to setup "NO" (Normal Open) or "NC" (Normal Close). 6. CHANNEL-2 ~ CHANNEL-4: Please follow the setup shown above (CHANNEL-1). 27 DVR-4CF 8.6 Event List EVENT LIST > TIME SEARCH EVENT SEARCH PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Pressandbutton to move the cursor to the desired item. 3. PressENTERbutton to proceed. 4. PressMENUbutton to exit "EVENT LIST" selection. 5. "EVENT LISTis situated on the second menu layer. Under this menu layer user may setup "TIME SERACH" or "EVENT SEARCH". 28 DVR-4CF 8.6.1 TIME SEARCH TIME SEARCH 05/01/13 192716 BEGIN TIME END TIME 05/01/13 192716 05/01/15 150006 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. TIME SEARCH: Displays system recording time (begin and end). 2. Pressandbutton to select the desired time and date. 3. PressENTERbutton to setup playback starting time and date. 4. PressMENUbutton to exit "TIME SEARCH" selection. 5. PressPLAYbutton to play. 29 DVR-4CF 8.6.2 EVENT SEARCH EVENT SEARCH BEGIN 05/01/15 150001 > 01 ALARM 02 MIX 03 TIME 04 ALARM END 05/01/15 150006 2005/01/15 150001 2005/01/15 140001 2005/01/15 130001 2005/01/15 120001 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. EVENT SEARCH: Displays all recording events, every page consists of 7 events, and maximum 63 stored events. 2. Pressandbutton to select the desired event to playback. 3. PressMENUbutton to exit "EVENT SEARCH" selection. 4. PressPLAYbutton to play. BEGIN 05/01/15 150001 END 05/01/15 150006 Displays the beginning and end time of each event. 30 DVR-4CF 8.7 CF Card Setup CF CARD SETUP > COPY FORMAT/ERASE TOTAL CAPACITY REMAINING CAPACITY 512MB 100MB PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Pressandbutton to select the desired item. 3. PressENTERbutton to proceed. 4. PressMENUbutton to exit "CF CARD SETUP" selection. 5."CF CARD SETUPis situated on the second menu layer. Under this menu layer user may setup to "COPY" or "FORMAT/ ERASE". 6. TOTAL CAPACITY: CF Card total capacity (MB per unit). 7. REMAINING CAPACITY: CF Card remaining capacity (MB per unit). 8. When remaining capacity equals zero, indicates that there's no storage space available. Please format the CF Card (FORMAT/ ERASE). Note! When the screen displays "NO CF CARD EXIST", indicates that the system can not detect the CF-card. Note! Format the CF card (FORMAT/ ERASE) before first time use. Please do not use the format (FORMAT) function supplied by the personal computer, data may be lost due to such action. 31 DVR-4CF 8.7.1 SELECT TIME SELECT TIME > DAY BEGIN TIME END TIME COPY 05/01/15 150001 150006 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. SELECT TIME: Displays the newest event date, begin and end time. 2. Pressandbutton to select the desired item. 3. PressENTERbutton to setup the desired date and time to proceed copy (COPY) function. 4. PressMENUbutton to exit "SELECT TIME" selection. When the message "CF CARD FULL" is displayed on the screen, indicates that storage capacity CF Card is empty. Please format (FORMAT/ ERASE) to proceed. When the message "Time Input Error" is displayed on the screen, indicates that the time date entered is incorrect or no data. The system auto returns to CF Card setup selection. 32 DVR-4CF 8.7.1.1 COPY (1) (2) (3) (4) (5) SELECT DATA10MB ESTIMATED TIME2 Minute START COPY CAPACITY IS NOT ENOUGH 10% COPIED (6) PRESS (ENTER) TO COPY (7) PRESS (MENU) TO EXIT 1Data capacity. 2Estimated time to complete data copy. 3Request to confirm copy. 4When the data capacity is greater than the remaining storage capacity, the message "CAPACITY IS NOT ENOUGH" will be displayed. 5Data copy percentage completed. 6PressENTERbutton to start copy. 7PressMENUbutton to exit "Copy Display". 33 DVR-4CF 8.7.2 FORMAT/ ERASE PASSWORD INPUT 6 ------ 1. When proceeding "FORMAT/ ERASE" function, the above display will be shown. 2. When password entered is correct, the screen will display the message "PASSWORD CORRECT", "CF CARD FORMATED" (flashes 3 times), indicates CF Card format is successful. 3. When password entered is incorrect, the screen will display "PASSWORD INCORRECT" (flashes 3 times), and returns to "CF CARD SETUP" selection. This password equals to hard disk format password. 34 DVR-4CF 8.8 Hard Drive Setup HARD DRIVE SETUP > DISK FULL HDD SIZE HDD USED HDD FORMAT OVERWRITE 120103MB 13321MB 11% PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Pressandbutton to select the desired item. 3. PressENTERbutton to make changes or to proceed. 4. PressMENUbutton to exit "HARD DRIVE SETUP" selection. 5. "HARD DRIVE SETUP" is situated on the second menu layer. Under this menu layer user may setup to overwrite or format the hard disk. 6. DISK FULL: PressENTERbutton to setup "ON" or "OFF", whether to overwrite or stop recording when the hard disk is full. 7. HDD SIZE: Displays hard disk capacity. 8. HDD USED: Displays the capacity already used. 35 DVR-4CF 8.8.1 HDD FORMAT: PASSWORD INPUT 6 ------ 1. When proceeding "HDD FORMAT" function, the above display will be shown. 2. When password entered is correct, the screen will display the message "HDD FORMATTED" (flashes 3 times), indicates hard disk format is successful. 3. When password entered is incorrect, the screen will display "PASSWORD INCORRECT" (flashes 3 times), and returns to "HARD DRIVE SETUP" selection. 36 DVR-4CF MEMO 37 DVR-4CF