® DVR-4TL series User's Manual 00P3DG090SSEA1 Version 1.1 00P3DG090SSEA1 User's Manual Caution and Preventive Tips · · · · · · · · Take care not to drop the unit or subject the unit to major shocks or jolts. Do not place this unit on an unstable stand, bracket or mount. This unit is designed for indoor use only. Do not place the unit near water or in other extremely humid conditions. This unit should not be placed in a built-in installation unless proper ventilation is provided. Please check the used type of power source before you plug and operate the unit; AC100V ~AC240V is acceptable. If the clearing is necessary, note to plug the unit from the outlet before uncovering the top cover. Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning. Always power down the system prior to connecting and disconnecting accessories, with the exception of USB devices. Lithium battery: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type recommended by the battery manufacturer. Dispose of used batteries according to the battery manufacturer's instructions. · Do not block the fan on the bottom of the unit for air ventilation. This symbol intends to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol intends to alert the user to the presence of unprotected "Dangerous Voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock. 2 User's Manual Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance. Rack Mounting Consult with the supplier or manufacturer of your equipment rack for the proper hardware and procedure of mounting this product in a safe fashion. Avoid uneven loading or mechanical instability when rack-mounting units. Make sure that units are installed to get enough airflow for safe operation. The maximum temperature for rack-mounted units is 40 °C. Check product label for power supply requirements to assure that no overloading of supply circuits or over current protection occurs. Mains grounding must be reliable and uncompromised by any connections. 3 User's Manual Table of Content 1. Overview..........................................................................................................................6 1.1 Product Key Features............................................................................................6 1.2 Product Application Diagram .................................................................................7 2. System Setup..................................................................................................................7 2.1 Position the Unit ....................................................................................................8 2.2 Selecting Video Format .........................................................................................8 2.3 2.4 Connecting Devices to the Unit .............................................................................8 Rear Panel Connections........................................................................................9 3. General System Setup .................................................................................................12 3.1 Front Panel Introduction ......................................................................................12 3.1.1 LED Definition ........................................................................................12 3.1.2 Function Keys ........................................................................................13 Power Up / Down the Unit ...................................................................................15 Entering OSD Setup Menu ..................................................................................16 System Date / Time Setting .................................................................................17 3.4.1 Set Date / Time ......................................................................................17 3.4.2 Daylight Saving Time .............................................................................18 Record Schedule / Quality Setting ......................................................................19 3.5.1 3.5.2 3.5.3 3.5.4 Record Mode..........................................................................................19 Schedule Setup......................................................................................20 Preset Record Configuration .................................................................20 To Record Event Video Only..................................................................21 3.2 3.3 3.4 3.5 4. Basic Operation ............................................................................................................21 4.1 Viewing Live / Playback Video.............................................................................21 4.1.1 Viewing Modes.......................................................................................21 4.1.2 Digital Zoom ...........................................................................................22 Viewing Live Cameras ...........................................................................22 To Freeze Live Image ...............................................................................22 4.1.4 Viewing Recorded Video........................................................................22 Key Usage in Playback.............................................................................23 4.2 4.3 Pause Playback and Single Step Forward ...............................................23 Sequence Setup ..................................................................................................24 Searching Recorded Video..................................................................................24 4.3.1 Searching by Time .................................................................................24 4.3.2 Searching by Event................................................................................25 Video Export ........................................................................................................26 4.4.1 ezBurn Introduction................................................................................26 4 4.1.3 4.4 User's Manual 4.5 4.6 4.4.2 To Export Normal Video .........................................................................27 4.4.3 To Export Event Video ...........................................................................28 Deleting Recorded Video.....................................................................................28 Dome Control.......................................................................................................29 4.6.1 4.6.2 4.6.3 4.6.4 4.6.5 4.6.6 Dome Connection ..................................................................................29 Dome Protocol Setup.............................................................................30 RS485 Setup..........................................................................................30 Dome Controlling Keys ..........................................................................31 Setting Preset Points .............................................................................33 Calling Preset Points..............................................................................34 Appendix A: Technical Specifications .............................................................................35 5 User's Manual 1. Overview The DVR-4TL series is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder, a multiplexer, and a video server to create a single security CCTV solution. Its outstanding triplex operation enables users to view live or playback recorded video, and remote access through network simultaneously, while recording other video, and to view wanted recorded video instantly by entering the time and date or selecting recorded video from the event list. DVR-4TL series includes specoRemote Lite, the remote viewing software that is a Web-browser plug-in, allows user to view live or recorded video images. The remote software is stored in DVR-4TL series and deployed over a LAN, WAN or Internet connection to remote Windows-based computers. This simplifies the installation and maintenance of the software components so all remote users are kept up to date. 1.1 Product Key Features The DVR-4TL series offers advanced features not typically found in standard multiplexers; it integrates the full features of a DVR, multiplexer and video server (by using the software specoRemote Lite). The key features of DVR-4TL series are listed as follows. · · · · · · · · · · · · · MPEG-4 high quality compression, 5~10 times smaller than MJPEG Triplex operation (recording, playback and network access) Remote monitoring, instant recording and dome camera control via Ethernet Support VGA main output (optional) Real-time live display for each channel 1 Channels, in & out, for audio recording Support up to 2 internal HDDs USB2.0 port for video clip exporting, support USB ThumbDrive® Easy software upgrade via USB ThumbDrive® Multiple built-in dome camera protocol: DynaColor, Pelco D, Pelco P, AD422 and Fastrax 2. Digital Zoom 2X2, available in live mode Pre-Alarm recording IR Remote controller (Optional) 6 User's Manual · · · Multiple language on-screen menus Network software supports static IP and DHCP Support RS-485 remote control keyboard (Optional) 1.2 Product Application Diagram Connect the unit with other devices as shown in the system diagram to complete a video surveillance solution. The figure shows also the expandability and flexibility of this digital recording system. 2. System Setup The notices and introduction on system installation will be described particularly in this chapter. Please follow the description to operate the unit. In order to prevent the unit from data loss and system damage that caused by a sudden power fluctuation, use of an Uninterruptible Power Supply (UPS) is highly recommended 7 User's Manual 2.1 Position the Unit Position / mount the DVR-4TL series in a proper place and be sure to power off the unit before making any connections. The placed location should avoid hindering or blocking the unit from airflow. Enough airflow is needed to protect the unit from overheating. The maximum allowable temperature of operating environment is 40°C. The unit utilizes heat-conducting techniques to transfer internal heat to the case, especially to the bottom side of the unit. NOTE: Be sure not to remove the rubber feet, and always leave a space for air ventilation on the unit's bottom side. 2.2 Selecting Video Format The DVR-4TL series is designed to operate under either NTSC or PAL video formats. The switch is positioned on the rear panel. 2.3 Connecting Devices to the Unit This section lists some important notices that should be read before making any connections to the DVR-4TL series. NOTE: Connect short-term devices, such as USB ThumbDrive®, USB CD-ROM, USB Hard Disk Drive, etc., only after the unit is successfully powered up. Connecting Required Devices Before power up the unit, you should connect cameras and a main monitor to the unit for basic operation. If needed, connect a call monitor for displaying full screen video of all installed cameras in sequence. 8 User's Manual Connecting Short-term Device If you plan to install any short-term devices to the DVR-4TL series and use them as part of the unit system, such as USB CD-ROM, USB Hard Disk Drive, etc, make sure those devices are connected only after the unit is powered up. Because DVR-4TL series can recognize the external devices only after the power-up process is done completely. 2.4 Rear Panel Connections There are various connectors on the rear panel used for DVR-4TL series installations. The following figure shows the connectors by name; and followed by the detailed description of each connector. LAN Connector (RJ-45) The DVR-4TL series is capable of networking. The LAN port opens the door of DVR-4TL series to Ethernet. USB Connector There is a USB 2.0 port on the rear panel for users to connect external USB devices to the unit, such as ThumbDrive® or CD-ROM. Audio In / Out (x2) The DVR-4TL series provides two sets of audio recording. Audio In RCA connector is offered for connecting an audio source device (e.g. external amplified microphon ...