Owner's Manual for In-Ceiling & In-Wall Speaker Models: SP-525C SP-625C SP-825C SP-525W SP-625W SP-825W 7.04 200 New Highway Amityville, New York 11701 · Outside Metro NY: 1-800-645-5516 631-957-8700 · www.specotech.com Congratulations on your purchase of Speco Technologies' Series 25 Audio Speakers! 5) Run speaker wire through ceiling or wall to mounting location. 6) Make sure all amplifiers/receivers are turned off prior to connecting any speaker wire. 7) Remove speaker grille by turning the rear easy mounting tabs counter-clockwise to stop, and then push them upward to pop out grille. 8) After grille is removed, connect the positive speaker wire to the red push-spring wire terminal on the back of the speaker. 9) Connect the common wire to the black push-spring wire terminal on the back of the speaker. 10) Pay close attention to proper impedance matching when wiring multiple speakers. 11) Once the speaker is wired, test the speaker at low volume to make sure connection is strong prior to final placement. 12) Place speaker with easy mount tabs turned clockwise inward into the mounting hole. 13) Turn screws on outer rim of speaker face clockwise which will result in the easy mount tabs clamping down on the mounting surface from behind. 14) When speaker is secure, position/pivot tweeter in direction of listening area. 15) On In-Wall Units, set +/- 3 dB Treble Switch to personal preference. 16) Carefully replace grille on speakers. Speco Technologies offers a limited 15-year warranty on indoor speakers. Please consult enclosed warranty card. Manufactured from durable and quality components, Speco Technologies' Series 25 Audio Speaker Line provides strong value. Enjoy the premium performance of full-range sound in your listening environment for countless years to come! Specifications SP-525C · 5.25" In-Ceiling Speakers · 5.25" Polypropylene Woofer with Rubber Surround · 3/4" Pivoting Silk Dome Tweeter · 30 Watts RMS/ 60 Watts Max · Frequency: 70Hz-20kHz · Sensitivity: 87 dB 1w/1m · Impedance: 8 ohms · Dimensions: 8" Dia. x 4" Depth · Mounting Dimensions: 6 5/8" Dia. · 2.4 lbs. Each SP-525W · 5.25" In-Wall Speakers · 5.25" Polypropylene Woofer with Rubber Surround · 1" Pivoting Silk Dome Tweeter · +/- 3dB Treble Switch · 30 Watts RMS/ 60 Watts Max · Frequency: 70Hz-20kHz · Sensitivity: 87 dB 1w/1m · Impedance: 8 ohms · Dimensions: 7 5/8" W x 11" H x 3" D · Mounting Dimensions: 6 1/8" W x 9 3/8" H · 2.7 lbs. Each Mounting Instructions: 1) Carefully select areas of the ceiling or wall where there are no obstructions, plumbing, heating/AC apparatus or electrical wiring to mount speakers. 2) Determine and make absolutely sure whether in-ceiling or in-wall mounting brackets are needed to support speaker's weight. Complementing mounting brackets can be ordered through Speco Technologies. Speco Technologies assumes no liability for mis-installed speakers. 3) Use provided cutout guideline and trace cut out area with a pencil on mounting location. 4) Carefully cut out the area of traced guideline, removing portion of sheet rock or ceiling tile to expose mounting hole. SP-625C · 6.5" In-Ceiling Speakers · 6.5" Polypropylene Woofer with Rubber Surround · 1" Pivoting Silk Dome Tweeter · 40 Watts RMS/ 80 Watts Max · Frequency: 50Hz-20kHz · Sensitivity: 89 dB 1w/1m · Impedance: 8 ohms · Dimensions: 9 1/4" Dia. x 4 1/4" Depth · Mounting Dimensions: 7 3/4" Dia. · 3 lbs. Each SP-625W · 6.5" In-Wall Speakers · 6.5" Polypropylene Woofer with Rubber Surround · 1" Pivoting Silk Dome Tweeter · +/- 3dB Treble Switch · 40 Watts RMS/ 80 Watts Max · Frequency: 68Hz-20kHz · Sensitivity: 88 dB 1w/1m · Impedance: 8 ohms · Dimensions: 8 3/4" W x 12 1/4" H x 3 1/2" D · Mounting Dimensions: 7 1/2" W x 11" H · 3.4 lbs. Each Speco Technologies' has leveraged over 40 years of residential sound expertise in developing our core in-ceiling and in-wall audio line, the Series 25 Audio Speaker Line. SP-825C · 8" In-Ceiling Speakers · 8" Polypropylene Woofer with Rubber Surround · 1" Pivoting Silk Dome Tweeter · 50 Watts RMS/ 100 Watts Max · Frequency: 49Hz-20kHz · Sensitivity: 89 dB 1w/1m · Impedance: 8 ohms · Dimensions: 11" Dia. x 5" Depth · Mounting Dimensions: 9 1/2" Dia. · 4 lbs. Each SP-825W · 8" In-Wall Speakers · 8" Polypropylene Woofer with Rubber Surround · 1" Pivoting Silk Dome Tweeter · +/- 3dB Treble Switch · 50 Watts RMS/ 120 Watts Max · Frequency: 51Hz-20kHz · Sensitivity: 88 dB 1w/1m · Impedance: 8 ohms · Dimensions: 10 3/4" W x 14 1/2" H x 3 5/8" D · Mounting Dimensions: 8 3/4" W x 12 3/4" H · 3.7 lbs. Each ...