Planning Information Wine Storage Model 427 Full-Size Discreet lighting Lighted electronic control panel Full-view glass door (standard) Divider gasket Lighted display shelf Model 427 Serial and model number plate Roller-assembly shelves UV-resistant glass Home security tie-in Front venting with removable kickplate With the installation of a harness kit, these appliances are Star-K compliant to meet strict religious regulations in conjunction with specific instructions found on star-k.org. You may purchase this harness kit through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com. The Sub-Zero Model 427 Wine Storage unit, integrated design accepts custom wood or stainless steel door panels. Door panels and handles are available as sales accessories in three stainless steel finishes-- classic, platinum and carbon. A solid door unit may be special ordered as well as a unit with high altitude glass for installations at or above 5,000' (1524 m) in elevation. great addition to Sub-Zero's complete line of residential refrigeration is the Wine Storage equipment. But it is more than just wine storage in the conventional sense. It is wine storage as only Sub-Zero could make it. The ultimate in beauty, engineering, attention to detail and smart thinking. This unique unit is compatible with the Integrated line of products offered by Sub-Zero and would be a nice addition to a line of a tall refrigerator or tall freezer in someone's home. When you think about panels and surrounding cabinetry you should review the Integrated Refrigeration section of this Guide to get you into the proper frame of mind. A Dimensions in parentheses are in millimeters unless otherwise specified. 11/06 1 Planning Information Wine Storage Model 427 F E AT U R E S Full-size Wine Storage unit with 132 (750 ml) bottle capacity Integrated design accepts custom wood or stainless steel door panels offered in three stainless finishes Refrigeration system allows individual temperature control of the two wine compartments and ideal humidity Illuminated display shelf for those prize bottles Sturdy, rustproof wire shelves accommodate standard 750 ml bottles, half-bottles, as well as magnums Roller-glide shelves faced with natural cherry wood have a three-quarter extension for easy access Full-view glass door standard with UVresistant glass protection Solid door unit and high altitude glass unit can be special ordered Discreet low voltage interior lighting Service light indicator, optional lock and tie-in to home security system The exclusive dual action hinge has a built-in 90° door stop UL approved for US and Canada Two, five and twelve year residential warranty--exclusions apply; warranty information can be found on our website, subzero.com OVERALL DIMENSIONS 27 (686) 1 26 8 (664) DOOR FRAME 14 (356) 24 (610) (UNIT DIMENSION) 13 16 (20) 237/8" (606) 80 (2032) 3 10 4 (273) CENTERED VERTICALLY 7 7016 5 *78 8 (1997) (1789) DOOR FRAME WITH HINGES 105° 90° 251/2" (648) MAXIMUM DOOR SWING 251/2" (648) 28" (711) DOOR CLEARANCE 35" (889) DOOR CLEARANCE NOTE: Door swing clearances are based on stainless steel door and handle dimensions. 15 816 (227) FRONT VIEW _ *1/2" (13) + ADJUSTMENT IN LEVELING LEGS 4 (102) SIDE VIEW Overall dimensions shown in the standard full-view glass door application. Dimensions may vary by ± 1/8" (3). Dimensions in parentheses are in millimeters unless otherwise specified. 2 Planning Information Wine Storage Model 427 S P E C I F I C AT I O N S Model 427 Overall Width Overall Height DOOR OPTIONS Full-Size Wine Storage Unit 27" (686) 80" (2032) 24" (610) 132 Bottles (750 ml) 79 1/2" (2019) 25 1/2" (648) 115 V AC, 60 Hz, 15 amp circuit Glass Door ­ 395 lbs (179 kg) Solid Door ­ 386 lbs (175 kg) High altitude glass doors are available for elevations 5,000' (1524 m) or above Overall Depth Wine Storage Capacity 427G 427S 427HAG Minimum Height (levelers in) Door Swing Clearance Electrical Requirements Shipping Weight Special Note Full-View Glass Door (standard) Solid Door High Altitude Glass Door You must allow 90 days from order to delivery for solid door and high altitude glass door units. PA N E L O P T I O N S Specifications are subject to change without notice. Integrated (custom panels) Classic Stainless Steel Finish Platinum Stainless Steel Finish Carbon Stainless Steel Finish /S /P /B Stainless steel full-view glass and solid door front panels are ordered and shipped as sales accessories and include tubular handles. ACCESSORIES Tubular handles in classic, platinum and carbon stainless steel Polished chrome handles for custom panel applications UL approved door lock kit Dual installation heater kit Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com. Dimensions in parentheses are in millimeters unless otherwise specified. 3 Planning Information Wine Storage Model 427 I N S TA L L AT I O N S P E C I F I C AT I O N S TOP VIEW *PLACEMENT OF THE 1 1/2" ANTI-TIP BRACKET (38) SHOULD BE 24" (610) FROM THE FRONT OF THE UNIT WITHOUT PANELS TO THE BACK OF THE ANTI-TIP BRACKET. ANTI-TIP BRACKET* 13 1/2" (343) (635) 25" (686) 27" (635) 25" LOCATE ELECTRICAL WITHIN SHADED AREA ­ ORIENT GROUND PRONG TO RIGHT AS SHOWN ANTI-TIP BRACKET (2032) 80" 4 1/2" (114) 1/4" (6) 13" (330) 2 1/2" (64) 15 1/2" (394) NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO PREVENT UNIT FROM TIPPING FORWARD ANTI-TIP BRACKET FRONT VIEW SIDE VIEW DIMENSIONS Finished Rough Opening Width Finished Rough Opening Height Finished Rough Opening Depth Location of Electrical 27" (686) 80" (2032) 25" (635)* Within shaded area *The depth of the Model 427 is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635). See Installation Instructions shipped with unit for detailed specifications. Dimensions in parentheses are in millimeters unless otherwise specified. 4 Planning Information Wine Storage Model 427 I N S TA L L AT I O N N OT E S Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics. IMPORTANT NOTE: The depth of Model 427 is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635). Refer to the installation illustration on page 4. The Wine Storage unit must be installed to open a minimum of 90° or you will have problems pulling the shelves out. For corner installations, you need allow for a minimum 3" (76) filler so the door can open to 90°. If you are using some larger handle hardware, you will also need to take that into account. For a maximum 90° door opening, use the door stop built into the hinge system. If you are installing a wine unit next to an existing Sub-Zero unit, you may have to allow for a filler strip. Also, if there is 2" (51) or less in between units, an optional heater kit will need to be installed to prevent moisture from forming in between units. If you are connecting the unit to your home security system, you must allow a minimum of 36" (914) of the system's wiring to be routed in the electrical area designated for your model. The anti-tip bracket must be installed to prevent the unit from tipping forward. If your client has chosen the Model 427 stainless steel design, you will need to have the stainless steel panels and handle hardware installed. For the integrated design, you will need to provide a complete door panel in the instance of a solid door unit, or a frame for the glass door application, where wine will be seen from the outside. Refer to pages 6­11 for complete panel information. IMPORTANT NOTE: A solid door panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel. Solid door models are available as a special order and require 90 days for delivery. The door panel for Model 427 can grow beyond the 80" (2032) height to accommodate any size of door as long as you stay below door panel weight limit. For Model 427, the weight limit for a frame panel for the glass door unit is 20 lbs (9 kg). The weight limit for a solid door panel is 40 lbs (18 kg). If you are installing Sub-Zero's optional lock kit, you may have to order door panels that exceed the 80" (2032) finishing height. Consult the lock installation instructions and see if your panels will allow for an adequate installation. For integrated panel applications, you must supply your own handle hardware. It is recommended you use our optional handles and use the pre-drilled holes supplied to locate the handles within the frame of our unit. Refer to page 12 for specifics about installing handle hardware. Sub-Zero has provided a natural cherry wood facing to each of the wine shelves. You can choose to replace these strips with wood more complementary to your design and surrounding cabinetry. Refer to the full-scale illustration on page 14 for dimensions on the wood facing. A 115 V AC, 60 Hz, 15 amp fused electrical supply is required. It is recommended that a separate circuit, serving only this appliance, be provided. All Sub-Zero Wine Storage units are equipped with a power supply cord with a 3-prong grounding plug which must be plugged into a mating 3-prong grounding type wall receptacle. Locate electrical within the shaded area shown in the installation illustration on page 4. You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service. Refer to the Wine Storage Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly. Dimensions in parentheses are in millimeters unless otherwise specified. 5 Planning Information Wine Storage Model 427 I N T E G R AT I N G C A B I N E T RY Unless you are installing a stainless steel unit, you will need to provide a full door panel in the instance of a solid door unit, or a frame for the glass door application, where wine will be seen from the outside. If you order a stainless steel Model 427, you will need to have the stainless steel panel and handle installed. A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel. I N T E G R AT E D PA N E L S If you are familiar with our Integrated line and its panel applications, this section will be relatively easy to understand. The Wine Storage solid door panels or frame panels for glass doors will follow some of the identical planning processes you learned with the Integrated line. The installation of the door panels is completely different, however. Rather than using the mounting hardware we used with the Integrated units, the door panel for Model 427 will be attached with screws applied through our door. IMPORTANT NOTE: The depth of Model 427 is 24" (610) from the front of the unit to its back. You MUST allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward. The glass door opening of the standard Model 427 is designed to be exposed to room air circulation. Decorative overlays on the glass should be kept to a minimum. While the cabinet front stiles are a minimum of 2 1/4" (57), the top and bottom rails are different. Rails and stiles can be increased in size but should not exceed cabinet manufacturers standard width. They cannot exceed overall door panel dimensions specified, as they would interfere with the operation of the door. The back sides of rails and stiles that will be visible through the glass door will need to be finished. Also, the inside edges of the frame must be finished to match the front surface. Dimensions in parentheses are in millimeters unless otherwise specified. 6 Planning Information Wine Storage Model 427 I N T E G R AT E D PA N E L S IMPORTANT NOTE: Wine Storage models with a solid door are available as a special order and require 90 days for delivery. The dimensions of these panels and stiles are assuming the Model 427 finishes off at 80" (2032) in height overall and has a 4" (102) toe kick. If you finish off at 84" (2134) for instance, you must add 4" (102) additional to the overall height of the panel and remember to add 4" (102) to the top rail. Likewise, if you allow for a 6" (152) toe kick for the Model 427, you must subtract 2" (51) from the bottom rail. IMPORTANT NOTE: The toe kick area on the Model 427 cannot be larger than 6" (152) or less than 4" (102). ...