Planning Information Built-In Model 648PRO Side-by-Side Refrigerator / Freezer Stainless steel construction Dual refrigeration system Easy-access grille Exterior temperature display Water filter Microprocessor and interior control panel Alarm Sabbath Mode Model 648PRO Free-Standing or Built-In Auto-close hinge system Adjustable spill-proof glass shelves Adjustable stainless steel shelves Slide-out stainless steel bins Crisper drawer Automatic ice maker Drawers with dividers This appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org. The Sub-Zero Model 648PRO sideby-side refrigerator / freezer is available in the stainless steel design application with classic stainless steel finish only. Model 648PRO can be built-in or, with the free-standing accessory kit, used in a free-standing application. of 100% steel (and maybe a bit of brashness), the Model 648PRO is no less than a masterpiece of preservation. Its sculpted metal, dual refrigeration and advanced controls marry performance, and design in a bold new way for home refrigeration. So it not only keeps foods magnificently fresh, it keeps kitchens in rather remarkable form. The Model 648PRO is just the latest, sleekest example of how Sub-Zero keeps rewriting the rules of preservation and attraction. Born Dimensions in parentheses are in millimeters unless otherwise specified. 11/06 1 Planning Information Built-In Model 648PRO F E AT U R E S Can be built-in or, with the free-standing accessory kit, used in a free-standing application Dual refrigeration--two compressors and three evaporators keep foods fresher longer and prevent odor transfer Exterior temperature display with easy-toread digital readouts, accurate within one degree of your preset temperatures Microprocessor and interior control panel with up-front touch controls monitor pattern-sensing defrost and automatic service alerts Sabbath Mode--power down one or both sides for extended periods or just the weekend Slide-out stainless steel bins--two versatile, removable bins hold small items and fit neatly under any shelf Crisper drawer is a touch-and-glide crisper with a tight-seal glass lid that gives vegetables generous humidity Drawers with dividers help you enjoy full access to food with adjustable, removable, and interchangeable drawer dividers Automatic ice maker lets you retrieve filtered ice from a stainless steel bucket Shelves are cantilevered and spill-proof, with stainless steel trim (refrigerator); adjustable, removable and 100% stainless steel (freezer) Auto-close system with an advanced hinge design lets doors finish closing easily and automatically Alarm with an audible beep lets you know when doors or drawers are left ajar Water filter is easy to replace and just behind the pop-up grille Easy-access grille pops up with a simple pull (no tools needed) to reveal the water filter and condenser for cleaning Stainless steel construction and classic finish (inside and out) for professional strength and beauty Advanced lighting--top LED lights bathe upper compartments in a soft glow; the refrigerator side has channeled sidewall LEDs Certified by Star-K to meet religious regulations UL approved for US and Canada Two, five and twelve year residential warranty--exclusions apply; warranty information can be found on our website, subzero.com 2 Planning Information Built-In Model 648PRO S P E C I F I C AT I O N S Model 648PRO Overall Width Overall Height ACCESSORIES Side-by-Side Refrigerator / Freezer 48" (1219) 84" (2134) 23 7/8" (606) 25 7/8" (657) 18.4 cu ft (521 L) 11.7 cu ft (331 L) 83 1/2" (2121) 28 3/4" (730) 115 V AC, 60 Hz 15 amp dedicated circuit 1/4" Depth from behind face frame Depth to front of face frame Refrigerator Capacity Freezer Capacity Minimum Height (levelers in) Door Swing Clearance Electrical Requirements Plumbing Requirements Water Supply 90 degree door stop kit -- right or left hinge Dozen egg container with lid Slide-out refrigerator bin Stainless steel side panel Free-standing kit -- includes two stainless steel side panels and top lid Refrigerator drawer dividers Stainless steel front and side toe kicks Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com. copper line 35 psi (2.4 bar) to 120 psi (8.3 bar) 689 kW / $ 63 860 lbs (390 kg) Model 648PRO can also be ordered with a glass door as Model 648PROG Annual Energy Usage (based on 9.06 cents per kilowatt hour) Shipping Weight Special Note Specifications are subject to change without notice. OVERALL DIMENSIONS 23 7/8" (606) BEHIND FACE FRAME 25 7/8" (657) TO FRONT OF FACE FRAME 84" (2134) 23 7/8" (606) 20 1/2" (521) 28 3/4" (730) 48" (1219) 48" (1219) 25 7/8" (657) 30 5/32" (766) Dimensions may vary by ± 1/8" (3). Dimensions in parentheses are in millimeters unless otherwise specified. 3 Planning Information Built-In Model 648PRO I N S TA L L AT I O N S P E C I F I C AT I O N S ROUGH OPENING DEPTH MIN 36" (914) 1/4" COPPER WATER LINE 24" (610) STANDARD 26" (660) FLUSH SHUT-OFF VALVE TOP VIEW 7" (178) E 6" (152) LOCATE ELECTRICAL WITHIN SHADED AREA ROUGH OPENING WIDTH 47 1/2" (1206) STANDARD 48" (1219) FLUSH MIN HEIGHT REQUIRED TO FINISHED FLOORING (LEVELERS IN) 83 1/2" (2121) STANDARD 83 3/4" (2127) FLUSH ROUGH OPENING HEIGHT TO FINISHED FLOORING 83 3/4" (2127) STANDARD 84 1/8" (2137) FLUSH 75 1/2" (1918) LOCATE WATER SUPPLY WITHIN SHADED AREA 6" (152) 3" (76) W 5 3/16" (132) F DIMENSIONS Finished Rough Opening Width Finished Rough Opening Height Finished Rough Opening Depth Location of Electrical Location of Water Supply Standard 47 1/2" (1206) Flush 48" (1219) Standard 83 3/4" (2127) Flush 84 1/8" (2137) Standard 24" (610) Flush 26" (660) Within upper shaded area Within lower shaded area See Installation Instructions shipped with unit for detailed specifications. Refer to the Sub-Zero Design Guide pdf file for additional specifications. Dimensions in parentheses are in millimeters unless otherwise specified. 4 Planning Information Built-In Model 648PRO I N S TA L L AT I O N N OT E S Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics. Model 648PRO can be used free-standing or installed as a standard or flush built-in application. For standard built-in installations, the face frame of the unit will extend 2" (51) beyond cabinetry. In flush built-in installations, the front of the face frame will be flush with surrounding cabinetry. The depth of Model 648PRO from the back of the unit to the front of the face frame is 25 7/8" (657). In flush built-in applications, your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. The anti-tip bracket must be installed to prevent the unit from tipping forward. Allow the doors to open a minimum of 90° or you'll have problems removing shelves. With the door opening at 90°, you may have to move shelves slightly to clear the door interior. Refer to the minimum door swing clearance in the specifications chart. For corner installations, allow for a minimum 3" (76) filler so that the door can open to 90°. Model 648PRO comes with an automatic ice maker and an integrated water filtration system. This system operates on water pressure between 35 psi (2.4 bar) and 120 psi (8.3 bar). To rough in the water supply, connect a 1/4" OD copper line to the house supply, being sure to use an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com. IMPORTANT NOTE: A reverse osmosis system can be used with Model 648PRO, provided there is constant water pressure of 20 psi (1.4 bar) to 120 psi (8.3 bar) supplied to the unit at all times. In this application, the integrated water filtration system must be set to bypass mode. This is achieved by removing the water filter cartridge. Refer to the PRO 48 Installation Instructions packed with the unit. The water line should be routed up through the floor within 1/2" (13) from the back wall and no higher than 3" (76) off the floor. If you have to come through the wall, make sure the water line is no more than 3" (76) from the floor. Locate water supply within the shaded area shown in the Installation illustration. Regardless of the routing, allow a minimum of 36" (914) of excess copper tubing to remain outside the wall or floor for easy connection to the unit. A 115 V AC, 60 Hz, 15 amp electrical supply is required. The supply circuit for this appliance must be protected by a 15 amp fuse or circuit breaker. It is recommended that a separate circuit, serving only this appliance, be provided. IMPORTANT NOTE: A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. Model 648PRO is equipped with a 6' (1.8 m) power supply cord with a 3-prong grounding plug which must be plugged into a mating 3-prong grounding-type wall receptacle. Locate electrical within the shaded area shown in the Installation illustration. You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service. Refer to the PRO 48 Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly. Dimensions in parentheses are in millimeters unless otherwise specified. 5 ...