Planning Information Model W302210 I (R) Pro Wall Hood Hand finished craftsmanship Classic stainless steel finish Model W302210I Backdraft damper Decorative rail (optional) Stainless steel baffle filters Model W302210IR Rail Option Welded seams and hemmed edges Recessed easy access controls Halogen lighting Infinite speed blower control Model W302210IR shown with standard classic stainless steel decorative rail, platinum or brass rail available as a sales accessory Wolf Pro low-profile wall hoods are 10" (254) high by 22" (559) deep and come in the classic stainless steel finish. Rail option hoods (R) include a classic stainless steel decorative rail and standoffs. Optional platinum or brass rails match dual fuel range bezels. This Wolf Pro low-profile wall hood has a 600 CFM internal blower. Wolf Pro wall hoods provide the ultimate in ventilation. With standard elements like heat sentry and dual setting halogen lighting, Wolf elevates the need for ventilation to an enjoyable perk. This 22" (559) deep model is the low-profile version, 30" (762) wide and available in the classic stainless steel finish. You also have the option of a decorative rail. While a classic stainless steel rail is standard on the (R) model, a platinum or brass rail is available as a sales accessory. For optimal performance, a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle. Dimensions in parentheses are in millimeters unless otherwise specified. 9/06 1 Planning Information Model W302210 I (R) Pro Wall Hood F E AT U R E S Low-profile ventilation hood with classic stainless steel finish Rail option hoods (R) come with a classic stainless steel decorative rail and stand-offs ­ optional platinum or brass rail available as a sales accessory 600 CFM internal blower included Heavy-duty 16-gauge brushed stainless steel construction Stainless steel enclosed liner Continually welded seams, hemmed edges and sides and hand finished craftsmanship Recessed easy-access controls Infinite-speed blower control Heat sentry feature automatically turns unit on when heat is sensed and automatically adjusts blower speed Halogen lighting with two settings Removable, dishwasher-safe, restaurantgrade stainless steel baffle filters Transition with backdraft damper included UL listed to US and Canadian safety standards UL approved for covered outdoor applications Two and five year residential warranty ­ exclusions apply; warranty information can be found on our website, wolfappliance.com OVERALL DIMENSIONS 12" (305) 10"(254) OVERALL HEIGHT 4"(102) 22" (559) OVERALL DEPTH 30" (762) OVERALL WIDTH Models W302210I 12" (305) 3/4" (19) DIAMETER OF RAIL 10"(254) 4"(102) 30" (762) OVERALL WIDTH Models W302210IR with Rail OVERALL HEIGHT 22" (559) OVERALL DEPTH 2" (51) Dimensions may vary by ± 1/8" (3). Dimensions in parentheses are in millimeters unless otherwise specified. 2 Planning Information Model W302210 I (R) Pro Wall Hood ACCESSORIES S P E C I F I C AT I O N S Platinum or brass decorative rail and stand-offs 38" (965) high stainless steel backsplash 38" (965) high stainless steel backsplash with warming rack 6" (152) and 12" (305) duct covers Recirculating kit Accessories are available through your Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com. Overall Width of Hood Overall Height of Hood Overall Depth of Hood ­ W302210I W302210IR (including rail) Internal Blower Included Duct Size Discharge Electrical Supply Requirements Shipping Weight (shell only) 30" (762) 10" (254) 22" (559) 24" (610) 600 CFM 8" (203) Round Vertical 110 / 120 V AC, 60 Hz 15 amp dedicated circuit 39 lbs (18 kg) For optimal performance, a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle.. Specifications are subject to change without notice. Dimensions in parentheses are in millimeters unless otherwise specified. 3 Planning Information Model W302210 I (R) Pro Wall Hood I N S TA L L AT I O N S P E C I F I C AT I O N S 6" (152) E 5" (127) LOCATION OF ELECTRICAL 10" (254) HEIGHT OF HOOD 30" (762) WIDTH OF HOOD 30" TO 36" (762­914) TO COUNTERTOP 30" TO 36" (762­914) TO COUNTERTOP 22" (559) DEPTH OF HOOD NOTE: Hood is vertical discharge only. For optimal performance, a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle.. DIMENSIONS Overall Width of Hood Overall Height of Hood Overall Depth of Hood (excluding rail) Countertop to Bottom of Hood Location of Electrical See Installation Instructions shipped with unit for detailed specifications. 30" (762) 10" (254) 22" (559) 30" (762) to 36" (914) Within shaded area Dimensions in parentheses are in millimeters unless otherwise specified. 4 Planning Information Model W302210 I (R) Pro Wall Hood I N S TA L L AT I O N N OT E S Refer to the illustrations and specifications for overall dimensions and installation specifics. For optimal performance, a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle. The hood should be as least as wide as the cooking surface. It is recommended that the hood overlap the cooking surface by 3" (76) on either side. Installation of all Pro wall hoods should be 30" (762) to 36" (914) from the bottom of the hood to the countertop. Follow the dimensions shown in the Installation illustration. Models W302210I and W302210IR come with a 600 CFM internal blower and are vertical discharge. Refer to the end of this section for Pro ventilation recommendations and blower options. IMPORTANT NOTE: Install this ventilation hood only with a Wolf blower. Pro wall hoods require a separate, grounded 110/120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Placement of the electrical supply is not critical, as long as you provide a minimum of 6" (152) of 120 V AC, 60 Hz power cable. Locate electrical within the shaded area shown in the Installation illustration. Note that the location of the electrical supply will differ between vertical and horizontal discharge blowers. You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service. Refer to the installation instructions shipped with each Wolf product for detailed specifications. This information can also be found on our website, wolfappliance.com. Dimensions in parentheses are in millimeters unless otherwise specified. 5 Planning Information Model W302210 I (R) Pro Wall Hood D U C T I N G C O N S I D E R AT I O N S Models W302210I and W362210I come with internal blowers, all other Wolf Pro low-profile wall hoods are shipped without the blower assembly. Internal, in-line or remote blower assemblies are available. The remote blower can be mounted on the roof or an exterior wall. Refer to the illustration below for ducting options. Pro low-profile wall hoods have an adjustable discharge location that can run vertically or horizontally. Horizontal discharge is applicable on low-profile wall hoods (excluding Models W302210I and W362210I) using a remote blower. Refer to the Pro ventilation charts at the end of this section for recommendations and blower options. DUCTWORK INSTALLATION THROUGH ROOF Ducting considerations for Pro low-profile wall hoods. ROOF CAP OR REMOTE BLOWER ­ TRANSITION FROM 8" (203) TO 10" (254) DUCT REQUIRED FOR REMOTE BLOWER 8" ROUND DUCT SOFIT OR CABINET OR DUCT COVER TRANSITION 17 3/4"W x 4 1/4"D TO 8" ROUND 3/8"H (INCLUDING FLANGES) 9 VERTICAL DISCHARGE 10" (254) HEIGHT OF HOOD WALL HOOD REMOTE BLOWER 22" (559) DEPTH OF HOOD DUCTWORK INSTALLATION THROUGH WALL DISCHARGE COLLAR HORIZONTAL DISCHARGE* 30" TO 36" (762­914) COUNTERTOP TO BOTTOM OF VENTILATION HOOD 36" (914) STANDARD FLOOR TO COUNTERTOP HEIGHT *HORIZONTAL DISCHARGE APPLICABLE ON LOW-PROFILE WALL HOODS (EXCLUDING W302210I AND W362210I) USING A REMOTE BLOWER. LOW-PROFILE WALL HOODS WITH AN INTERNAL BLOWER MUST USE VERTICAL DISCHARGE. Dimensions in parentheses are in millimeters unless otherwise specified. 6 Planning Information Wolf Ventilation Recommendations WOLF BLOWER ASSEMBLIES A ventilation system must include a blower assembly. With a few exceptions where internal blowers are included, Wolf ventilation hoods and downdrafts are shipped without the blower assembly. An internal, in-line or remote blower assembly must be selected to accommodate the cooking appliance, CFM requirements and homeowner preferences. Internal, in-line and remote blower assemblies are available as sales accessories through your Wolf dealer. Wolf internal, in-line and remote blowers are for use with Wolf cooktop hoods, downdraft systems and Pro ventilation hoods and hood liners. IMPORTANT NOTE: Use only a Wolf blower with all Wolf ventilation products. Internal blowers are mounted inside the hood canopy or downdraft blower box. In-line blowers are mounted in between the hood and the exterior of the home. Remote blowers can be mounted on the roof or in some cases, on an exterior wall. Refer to the illustrations below for dimensions of Wolf in-line and remote blowers. Ventilation recommendation charts on the following pages provide minimum CFM recommendations according to the cooking appliance and ventilation system used and blower options for each specific ventilation hood or downdraft. 24 3/8" (619) 24 7/8" (632) 11 3/4" (298) 18" 18 1/2" (470) (457) 12" (305) 4 1/2" (114) 8" (203) 211/2" (546) 12 1/4" (311) 22" (559) 18" (457) In-line BLOWER-60IL In-line BLOWER-110IL 18" (457) 20 3/4" 28 1/4" (718) (527) 21" (533) 10" 29 1/2" (749) (254) 10" 29 1/2" (749) (254) 10" (254) Diameter 24 1/2" (622) 10" (254) Diameter 14 3/4" (375) 10" (254) Diameter 29 1/2" (749) 15 1/2" (394) 29 1/2" (749) 14 3/4" (375) 14" (356) 10 1/8" (257) 10 3/8" (264) 4 3/4" 24 3/4" (629) (121) 22" (559) 7 1/4" (184) 25" (635) 7 1/4" (184) Remote BLOWER-60REM and BLOWER-90REM Dimensions may vary by ± 1/8" (3). Dimensions in parentheses are in millimeters unless otherwise specified. Remote BLOWER-120REM Remote BLOWER-150REM 7 Planning Information Wolf Ventilation Recommendations P R O V E N T I L AT I O N C F M R E C O M M E N DAT I O N S Pro Low-Profile Wall Hoods W302210I W362210(I) W422210 DF304 / R304 / SRT304 DF366 / R366 / SRT366 / RT366 DF364 / R364 / SRT364 / RT364 RT362 DF484 / R484 / SRT484 / RT484 R482 / RT482 600 600 900 900 900 900 900 900 900 900 W482210 NOTE: For optimal performance, a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle. Model numbers for dual fuel ranges, gas ranges, sealed burner rangetops and gas rangetops indicate width and number of surface burners. Features such as a charbroiler, griddle and/or French Top will vary. CFM recommendations are based on total Btu/hr output. Wolf recommends 1 CFM per 100 Btu/hr (.03 kW). Additional CFM may be required for long duct runs. P R O V E N T I L AT I O N B L O W E R O P T I O N S Pro Low-Profile Wall Hoods Blower Description 600 CFM Internal* 600 CFM Internal* 600 CFM In-Line* 600 CFM Remote 900 CFM Remote Blower Number Included with (I) Models WBLOWER-60INT (807614) BLOWER-60IL (808331) BLOWER-60REM (801640) BLOWER-90REM (801641) Wall Hood Models W302210I / W362210I W362210 / W422210 W362210 / W422210 / W482210 W362210 / W422210 / W482210 W362210 / W422210 / W482210 *Vertical discharge with 8" (203) round duct. Remote blowers are adjustable discharge with 8" (203) round duct. NOTE: For optimal performance, a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle. Wall hood models without decorative rail listed; blower options are the same for (R) models. Transition with backdraft damper included with all wall hoods. Blower configurations are for reference only. Refer to minimum CFM recommendations for your specific cooking product. Always consult a qualified HVAC Engineer for specific applications. Dimensions in parentheses are in millimeters unless otherwise specified. 8 ...